Find a professional gate installation in Frenchs Forest

Instal bunning pool gate plus posts, plus hinges, plus lock - 975mm gate plus pool fencing for the 'gap' - fencing will need to be cut to fit. Total gap is 1500mm (photos to follow) https://www.bunnings.com.au/protectoral-975-x-1200mm-black-aluminium-flat-top-pool-gate_p1142575 Parts will be supplied

Install new sliding gate motor. We have purchased new one that can easily be installed. Outside power plug is next to old one . (Old one needs to be taken out - see photos ) easy job

Please see pictures for reference. My trailer tailgate has snapped off, I believe there has been some rust and unusual stress loads at times on these points. It was also welded onto a thin piece of metal so was never really structurally sound. What I would like done is to have around 20-30cm of solid steel welded into the existing square box steel cross member. You would need to cut out a section in the exisiting box steel to insert and weld in. The hinges then need to be welded back onto the frame with the reinforced steel area in place. I believe it’s just some tack welds needed but whatever you recommend. I’m happy to travel to workshops to get this done as I understand mobile welders would probably cost more than me coming to you. Please put in your best price. Cheers

I am looking for someone to remove and clean around 9sqm exposed aggregate from my internal flooring, it need to be smooth e ough that i can install timber or laminate same level of my timber flooring. thickness to be removed is around 20mm.

i need a 3 new remote fob for my garage and electric gate and programmed to work

The gate has lifted a bit thus the door cannot be lock in place.

I need the locks fixed on my gate please would suit a handy man .

Require on-site quotation to remove damaged fence post / gate post and replace with treated pine equivalent. Gate post has broken at base. Gate post is 2 metres tall measures 100 mm x 100 mm treated pine with mortices for 3 rails. Post is concreted into ground and has rotted a base. Post is currently braced to prevent further damage. Require immediate quotation and will give immediate go-ahead for reasonable priced quote.

1.8m x 2m wide double door gate and 1.8 x 1m lap and cap fence

We need side fences installed between the house and boundary line. One side is approx 9m, the other side is approx 2.5m. Side 1: Fence from brick wall to side of the house. Posts can attach to the brick wall on one side if preferred, but must go into the ground on the house side (not attach to the house). 1 regular access gate somewhere in the middle. Approx W2.5m H 1.5-1.8m. Side 2: Continue the fence along the existing timber retaining wall, stepping down to the ground, for approx 5m. R/side return for approx 3m to take the fence along the yard and meet the house. Fence posts can attach to the retaining wall for part of the length, and then into the ground for the rest. 1 access gate. Approx W 8m, H 1.8m. Example image of the 'look' provided below. No painting required. Materials can be paid in cash with receipt. Quote is for labour. - Due date: Flexible

Pool gate does not close. Need wooden trim on four new bay windows and paint also on two french door sets. Trellis for a climbing rose. Sliding wardrobe doors are stuck. - Due date: Before Saturday, 14 October 2023

Replace wood panels on driveway gates (straight bottom and top, with top capping). Materials will be provided. No painting required. **UPDATE** Thank you for your time. I have decided to pause this project and post a different, smaller task to fix my pedestrian gate first as a trial, since this is my first air tasker job. Once that job is complete I will proceed with the driveway gates. - Due date: Flexible

Install balustrade on front deck, 2 side gates, timber screen in carport. Also make good carport supports - Due date: Flexible

I need a safety chain welded onto my box trailer. I also require 2 new bolts welded on the back to hold the tail gate up. There are already 2 bolts there but just need them replaced. (I will supply the bolts and chain). I will also need for you to weld on a brace and a bolt for the spare tyre in the middle of the front triangular (between the coupling and the box part of the trailer). I will supply the metal for the brace and the bolt. You just supply the welder and the skill. - Due date: Flexible

Wooden gate needs to be replaced - Due date: Flexible

One slat broken on chair needs replacement or fix. Portion of gate has come away its fixture making it unable to be closed as per pics. - Due date: Before Friday, 16 December 2022

Owner to supply standard wooden gate (approx 1x1.8)/hinges/dyna bolt/posts/latch. Quote to install only. Utilise your own tools - Due date: Flexible

2 side wooden gates are 20 years old and need repair or replacement - Due date: Flexible

we have large un fenced yard and I want to have some of the area fence with a gate for our dogs to use - Due date: Flexible

gate and some fence panels installed - Due date: Needs to be done on Friday, 1st Oct 2021