Find a professional gate installation in North West Perth

Wooden gate 1800 by 900 by 60 needs to be installed. Have the gate and hinges etc. The gate will be attached to back brick wall so will need to drill both into wall and gate. Shouldn't take more than and hour. Photos attached Must be done on or before Thursday.

Double gates and single gate to be installed. PVC with aluminium insert in posts. Got all the screws etc.

I have a large double gate and a single side gate to be fitted.

Hi. The front steel gate of our house has been bent partially. Need to straighten it up.

I want to install exposed aggregate in my backyard for a 40m² area. Looking for someone to do it at a reasonable price.

Need my sliding gate serviced and probably replace the motor

3.5 mtrs long x 1.8 mtrs high on our rear fence , to replace 2 gates total of 2.2mtrs swinging . Not sure of price , just need quote

I have a small gate that leads to the back of the house, would want this gate replaced or modified to a butterfly open. Both sides Open from centre going outwards to allow cars to drive through . Prize can be negotiated no problem

Need to setup retuculation system in new built home before expossed aggregate is poured...

panel on wooden gate needs replacing has rotted.

When this house was built the builder installed the exposed aggregate driveway and footpath. And then it rained and some of the concrete around the gravel washed off. They said that it would be fine but unfortunately it was not. We are left with too much exposed travel that has NOT been polished and the surface is now very sharp and jagged. We can't walk on it barefoot. Would love for a quote to fix the surface so that it is smooth so that our baby can walk on it and not hurt themselves. The area is about 65 to 75m2

Need a side gate 1500 high 1800 length

panel has rotted due to rain .

Increase the height of a brick column to match or exceed the height of the gate

Fence Installation: • Measure the required length for a white picket fence along • Purchase and install the fence, including posts, pickets, and rails, ensuring the structure is sturdy, level, and meets the specified height 2. Gate Installation: • Measure and purchase a matching picket gate • Include durable hinges, latch, and necessary hardware for smooth operation. 3. Painting: • Paint the fence and gate with weatherproof, outdoor-grade white paint. • Ensure a smooth, even finish with proper priming and preparation. Requirements for Quote: • Your team will be responsible for all measurements and material purchases. • Please provide a cost breakdown for materials, labour, and painting. • Include the estimated timeline for completion and any warranties or aftercare services offered. Let us know if you need access to the property for measurements or further clarification. We look forward to receiving your quote!

Need to install a 1m wide swing garden gate - preferably white and about 1.2m high. Preferably a Hamptons style - open to multiple material types. Located between our house wall and perimeter colour bond fence.

Installation of a fence 5.8m long made up of decorative fences panels and includes a double gate made up of two decorative panels. Fence to go in between a garage and dividing fence. https://www.bunnings.com.au/protectoral-1840-x-940mm-charcoal-jungle-framed-decorative-panel_p0036541?store=2435&gad_source=1&gbraid=0AAAAADtbEB96DTjyBoDplhY5M8hNw0UsB&gclid=EAIaIQobChMIupifyrzgiQMVniODAx3FDBvnEAQYAyABEgIvJvD_BwE&gclsrc=aw.ds

Laying concrete footings. Dimensions: 4300mm L x 180mm W x 400mm H

We have an old wood gate that is falling apart and is going to be replaced on Thursday. We need someone to dismantle the gate and remove the side pillars which are concreted into the paving so the new gate can be installed. We would also like the old bits of wood taken to the tip if possible.

Elevate gate and rebolt as it currently drags on floor Needs a new latch Material allowance will be provided on top.of airtasker free, please provide your quote for the labour.