Find a professional gate installation in Pymble

Replace current front pedestrian timber gate.

Remove dent from tailgate of a Toyota Kluger

Remove 2 latches to 1 pool gate,each spot welded to posts Install 2 new latches supplied by me

Remove old steel fence & gate. Replace with 2 wooden side panel fences and wrought iron gate. Need someone to choose the materials needed from Bunnings (we will pay for materials) and complete the job. We have the iron gate already.

Replace two Gates - the main gate is 2.9 metres and the smaller side gate is 0.85metres. May need to remove root - Due date: Flexible

Guy with circular saw needed to slice the bottom inch off my wooden gate. It has gotten rotten and I want to trim it off. - Due date: Needs to be done on Friday, 29 December 2023

2 metal fences and gate to be installed - Due date: Flexible

We would like three new fences /gates built at the back of our house to match front one to enclose for our dog. Gate 1 113 cm clearance between two rendered surfaces Gate 2 109cm clearance between rendered wall and timber balustrade at 100cm height . Would you place an aluminium gate here? or maybe a timber one to match? Gate 3 164cm clearance one side rendered wall other stone retaining wall I have also attached a photo of our existing fence / gate we would like to match this one. - Due date: Flexible

My side gate has come off it’s hinges (which I suspect have also rusted). Wanting the hinges replaced & the side gate operational again. - Due date: Flexible

I have a set of two new wrought iron gates that measure 200cm (w) by 185cm (h) complete with two hinge posts. The hinge posts need fixing to the stone pillars that are at the entrance to my drive. Some stone will need to be ground / chiseled from the pillars to create a flat surface where the posts are fixed. The gates are heavy ( 100kg +) - Due date: Flexible

The hinge on my side gate needs to be replaced. I also need the join between the gate and the wall to be fixed/strengthened. - Due date: Flexible

we need three dog gates built to close accesses, preferably in wood, same height as the terrace balustrade, two on the terrace and one around the corner shown at back in last photo - Due date: Flexible

- Colorbond Fence, supply & raked install 22m. - Colobond Gate ( 1m ). - Remove old paling fence. - Clear vegetation for Fence line. - Due date: Flexible

Gate has fallen off and the movable part below the gate needs to be put in Please have a look at the photos - Due date: Needs to be done on Thursday, 22 September 2022

DITEC control box may be the problem, as the gate cannot be opened or closed.

DITEC remote control gate not working properly. - Due date: Flexible

Gate pole and the gate handles need to be changed

Install gates onto concrete piers . Footing for piers . Install spear aluminium fence.

I need a Ball Bearing Gate Hinge - (right hand) fixed to a steel gate. I have already bought the new Gate Hinge and metal Hex Head Screws (12G x 20mm). Plus remove old rusted gate hinge already there. - Due date: Flexible

We need to enclose a decked area to stop our dog running out and terrorising the neighbours! He's a toy poodle (larger than a chihuahua) so he can squeeze through quite small gaps hence it needs to have quite narrow bars. Width is approximately 170cm. One side of the gate has to be fixed to an external brick wall, the other side is against a wooden pillar. Would like a door in the gate so humans can come and go, but latched so the dog can't push it open. Kind of like a baby gate, but not going to rust from being outside. Even better if the gate can be moved and not a permanent fixture.