Find a professional gate installation in Sydney Northern Beaches

1.8m high fence like the photo example with gate across driveway to separate backyard from driveway. Approx. 4.5m wide.

Entry gate to street doesn’t shut all the way. Need it fixed so it clicks shut properly. Steel gate frame .

need to replace metal swimming pool gate and it's supporting post, repair to a section of fence panel, and also fit a new safety latch.

Have added photos of the wooden gate

This gate has an automatic closing mechanism which keep breaking this latch. I would like to add something to the gate which stops it from breaking the latch possibly a piece of wood on the opposite side to stop the gate swinging through. Open to suggestions.

Instal bunning pool gate plus posts, plus hinges, plus lock - 975mm gate plus pool fencing for the 'gap' - fencing will need to be cut to fit. Total gap is 1500mm (photos to follow) https://www.bunnings.com.au/protectoral-975-x-1200mm-black-aluminium-flat-top-pool-gate_p1142575 Parts will be supplied

Gate & fence post snapped in high winds. Requires replacement fence post to be installed, with gate rehung (gate should be largely reusable)

White wooden garden slattered gate needs repairing or replacing depending on the cost.

White wooden garden gate needs repkacing

Remove ( skip provided) Build new doors for pool pump area. New hinges needed, frame. Price does not include supply of materials, that would be paid I cash with receipts Ideally make out of same material as decking( would need to source and bring to job).

Our pool fence needed to be revised for compliance. So we have new palings 1.8m high about 20m long which need to be painted on one side only. Also a small wooden gate.

We purchased a Merlin 3 channel universal receiver for our front gate and need someone to wire it in and help connect it to our Tesla homelink so it links and opens from the car rece mover. would have to be in under

Looking to get a 1.5 m tall privacy slate screening with gate for small courtyard

The gate lock broken, need to replace or fix ASAP

I have 2 stair gates, apparently very easy to install, the are the roller blinds type so width irrelevant. Requires drilling some holes, screws and making sure its straight ! Can be done on Monday or Tuesday evening next week.

The front two rooms of the house are exhibiting signs of moisture in the walls. This has caused: (a) bubbling of paint, (b) certain mould, and (c) loss of adhesion in cornices in the rooms. We would like a builder, plumber, and/or moisture specialist to come to the house to diagnose the problems, and present options to rectify the issues. Images attached.

1. I replaced my Bathroom exhaust fan and I can’t screw brackets in. Fan is in place on ceiling. Plugged in. Just can’t hold brackets and screw. 2. Gate lock screws no longer staying fixed on bottom screws. Needs plugging? 3. Re direct 3m high existing outside light. No electrical move. Just point it in another direction.

I have a rolling baby gate that inneed drilled onto a cement rendered wall (both sides of wall) outdoors. Looking for someone who can drill into cement without damaging it

The gate latch needs repairs. All tools need to be supplied by you. Location in Fairlight.

Please see pictures for reference. My trailer tailgate has snapped off, I believe there has been some rust and unusual stress loads at times on these points. It was also welded onto a thin piece of metal so was never really structurally sound. What I would like done is to have around 20-30cm of solid steel welded into the existing square box steel cross member. You would need to cut out a section in the exisiting box steel to insert and weld in. The hinges then need to be welded back onto the frame with the reinforced steel area in place. I believe it’s just some tack welds needed but whatever you recommend. I’m happy to travel to workshops to get this done as I understand mobile welders would probably cost more than me coming to you. Please put in your best price. Cheers