Find a professional gate installation in WA

Wooden gate 1800 by 900 by 60 needs to be installed. Have the gate and hinges etc. The gate will be attached to back brick wall so will need to drill both into wall and gate. Shouldn't take more than and hour. Photos attached Must be done on or before Thursday.

Need a stone wall to be cut to get access to a gate installed. All material resulting from the wall to be disposed of.

Supply and install of a Colorbond side gate( with lock), width around 1.4m

A Stratco side fence (1 m wide) needs to be moved up the post 60-70mm to allow for paving underneath it. Landscapers are already on site which is why it has to be done tomorrow.

Place posts and build gate. Custom ordered from Stratco.

Double gates and single gate to be installed. PVC with aluminium insert in posts. Got all the screws etc.

Wanting a slatted gate supplied and installed. Similiar style to attached photo but done in monument colour. dimensions (of the opening not just gate size) is 1500 width and 950 height

I have a large double gate and a single side gate to be fitted.

Need to bring powwr back to my gate. There was a fault and the line from the circuit board was disconnected. Want to run a new wire and circuit breaker from the junction box to the gate. 2m distance. Would also like to run a wire and install 2 plugs (10a) from the gate to the pool deck as in image(red arrow, approx 20m from junction box.

Welding latch onto a gate and plugging holes

Wooden gate that needs two palings replaced and screwed in- down and across. You will need to provide your own replacement wood planks please and your own tools (saw, screws and drill etc). My old dog chewed through this due to anxiety and I need this fixed today for the new dog we are getting. Please let me know if you have any experience doing a job like this especially if you are new to Airtasker.

Steel gate hinges have snapped off and require re-welding.

12G x 25mm screw size, two holes will not thread in. Gate is mounted to hollow sheet metal pole, 50mm depth

We have an old wood gate that is falling apart and is going to be replaced on Thursday. We need someone to dismantle the gate and remove the side pillars which are concreted into the paving so the new gate can be installed. We would also like the old bits of wood taken to the tip if possible.

Gate hinge has screws that keep falling out. May need metal drill to fix.

Self closing gate doesn’t close itself

Elevate gate and rebolt as it currently drags on floor Needs a new latch Material allowance will be provided on top.of airtasker free, please provide your quote for the labour.

Colorbond carport gates have been clad in pine on both sides, adding weight which necessitated installation of wheels on outside face to manoeuvre them more easily. Hoping to have the same or similar wheels installed on inside rather than outside.

I have a glass pool fence that requires gates installed. I have all components here, glass panels with pre drilled holes, hinges, locks. I have 3 gates in total to install, plus 1 glass panels inserted. Gate 1 - install complete gate hinges drilled into green pole, lock onto fence Gate 2 - swap glass panel into same position. Gate 3 - swap bottom hinge only Glass panels - install glass panel completely.

We need to fix the garage gate to be self-closing, with one side of the gate permanently fixed shut. And modify the windows to be restricted to open no more than 100mm