Find a local glass fencing contractor in North East Perth

Pool glass fence to be installed. Glass, spigots and all the fasteners will be provided. Length is 10m. 6 panels to be installed including door.

Brick rendered wall for pool area boundary fence to hide existing colourbond fence - Due date: Flexible

17m of pool fence is required. - Due date: Flexible

Remove old fencing and install new aluminium fence and gate. - Due date: Flexible

Pool gate doesn't close correctly to meet inspection criteria. May require post removal via removing brick pavers and dig up and re-install and concreted, then replacing brick pavers. Cost flexible - Due date: Flexible

After a glass pool fence, sheets probably 1 x 1 or similar up to the pole, then a glass soft shutting gate. will pay for materials/equipment extra Looking for people that have done this type of work before Extra: Aluminium gate at the back, otherwise I can do this as another side project - Due date: Flexible

I need a panel and gate installed for my small backyard Looking at flat top pool fence with safe tech latch and self closing hinges Overall measurements 4100mm Gate on the right side Check photos - Due date: Before Saturday, 15 July 2023

Have the fence materials already (glass fence). Need someone to install it around the pool. Inbox how much you can do it for. - Due date: Flexible

I have the pool fencing made over east bu Sentrel. I just need someone to install it for me. It's a fairly simple 9m x 4m rectangular aluminium pool fence installed onto aggregate concrete. https://sentrel.com.au - Due date: Before Sunday, 20 November 2022

Need new pool fencing supplied and installed. Looking at just metal tubular pool fencing about 15.5m of fencing and about 2 regular sized gates. - Due date: Flexible

Need this replaced for inspection Pool fence Can b any material would like both the fence gate to open if possible. See pictures Happy to pay cash - Due date: Before Friday, 15 April 2022

2 rusted base poles, possibly 3 sections of the pool fence requires replacement.

My site manager needed to go back to work and has all the fencing components to complete the job I am paying to have this job completed Need it completed urgently - Due date: Before Tuesday, 16th Nov 2021

Install pool fencing panels, I have the posts set up already and the pool fencing panels with a gate. 9 metres all up and in 3 metre lots. Just needs drilling on to the posts that are already installed as photos shows.

My glass pool gate had a floor spring which has died and unfortunately I smashed the gate trying to dig up the old floor spring. Of course this now means I'd prefer to move to wall springs/hinges. The glass/gate size I'll need is approx 1160mm high and 900mm wide. The current gap between the fixed panel and wall is approx 915mm however I do have 45mm at the other side of the fixed panel to play with (we can slide it sideways to accommodate the hinges). The gate will also require a hole drilled 300mm from the top and 45mm in to fit the existing latch. The existing fence is 12mm however I'm happy to run with an 8mm gate. A sketch is attached to assist with the quote.

I have a very large empty terracotta pot that I want moved into the pool area. This requires lifting a panel of glass pool fencing, moving the pot in, then sliding the glass panel back in. I have moved a panel previously with the help of a strong person. The pot is already in my backyard, sitting 6 metres away from the pool area. I am flexible on timing

14m pool fence, Fence onsite ready to go. can supply concrete and any other materials required