Find experienced glaziers in WA

A glass repair the current one broke

Requiring thick 10mm glass cut for a project. Most panels are just requiring 1 cut that will be to reduce the height. I have glass about 10mm thick and require some require them cut down the middle for a project I am going t

replace seals on shower door. Seals have perished and door does not sit at correct height. Door is 650 mm wide by 1800 mm high

Window glass to be repaired Location girrawheen 6064 Max budget is 150

Bottom glass of fish tank cracked needs replacing

Need back sliding door replacement

Windows glass cracked. Size is approx. 50 in Wide and 22 in Height. Fixed and located at the bottom of the window.

Need a glazier to fix the window. Measurements are approx 3x2 feet.

Need someone to supply and replace damaged shopfront window glass only. 2250mm x 1050mm x 5mm thick

I have to currently boarded bedroom windows that need to be replaced before rent inspection

Need a hole cut on a single pane glass door to insert a dog door.

Please see the photo around the deadlock - the wood is deteriorated and the deadlock does not secure into the wood correctly. A/ Please quote for the work that you recommend to replace the wood around this window (this window opens). In the photo of all 3 windows - it is the left window only. The part that opens needs the wood replaced or repaired. The (one) deadlock needs fitted after replace/repair. The window must open and close freely. B/ Optional work: Please quote to scrape/sand back and paint the window frame, outside, and inside. Apply silicone where the glass joins the wood. Please itemise this item separate to the above repair. The price to do this could be listed in text in your offer. Invoice & ABN/ You will need to have your own registered business, and the required insurances (for example workers compensation and public liability). An invoice will be required. Please contact me via AirTasker with any questions and send me your offer.

Need someone to put a new glass in the door as the old one shattered. The glass was roughly 61 mm x 1750 mm.

Supply and cut glass for these 2 sash frames (from same window) 1050x740 I can come to you

Broken glass panel 670mmx650mm approx

We need a glazier to install replacement hush glass (6.5mm Vlam Hush) into a 4 panel sliding door. The panels are 1950 x 602. The current door has 6mm laminated glass. Photo of door attached. If we find this product has a good level of sound reduction then we will be looking to have the glass changed in another 3 sliding doors (also 4 panels each). We have ordered the replacement panels already and they are being delivered, so this quote is just for installation. Will need a tax invoice for this job. Needs to be completed before 7 June.

Small cut/ crush to fibreglass bumper on Avida motorhome. Measures about 5 cm high by 2 cm wide

I need two windows in my house replaced. Both broken. One with a small hole and another with a crack. I can provide measurements on request. One bedroom window and games room window

A small pane of glass in a door frame has broken. Needs replacing. It is a leaded frame but we have had a different frame replaced in the past no problem

We need a doggy door moved . So remove the glass panel dog door is cut into and replace