Find gutter repair professionals in Paddington QLD

Looking for a professional painter to paint my tin roof the same colour it currently is and paint the gutters white. The roof is high and you’ll probably need a knuckle boom or something similar. Will need you to supply paint and hire any equipment yourself. Will need to work around this endless rain and willing to wait til the weather is a bit cooler if that’s better conditions. Will need a good cleaning first.

Replace or repair damaged section of gutter on 1920's style Queenslander. House is being painted now so there will be some ladders that painter will be setting up.

hole in gutter needs repair and a down pipe needs repair also Pictures now posted Hole in gutter is at connection point with down pipe - Due date: Flexible

New gutter installed recently. Square gutter. Not coping with heavy rainfall… water comes out the overflow slits. We want another down pipe cut in to help water runaway faster from gutter. We have Spare gutter here. Have to discuss spigot part as the flyover roof has made it a tight spot to deal with the gutter. - Due date: Flexible

Paint side wall of Queenslander and front fascia and gutter (see marked areas in red in photos). Including gutters, fascia, window cladding, and ownings. Between 45 and 50 m2 in total. On the side wall there is not enough space, so the work will need to be done with a ladder. The max high is about 5 meters. - Due date: Flexible

I need some leaking gutters on Mt house repaired or replaced. Please refer to the attached photos. Will probably need to come out look at job first.

I need a gutter professional to install a down pipe to connect this corner gutter to the storm water drain directly below. Water is collecting and dripping from that spot onto the ground below. - Due date: Flexible

We have three drips from gutter hitting next door carport roof . Which is making a loud noise . We are hoping for someone to patch the guttering . - Due date: Flexible

I need 5 rectangular 20cm x 2cm cutout to be made on my front gutter in order to allow water overflow outside the building instead of inside during heavy rainfall. The cutout need to be bent to redirect water away from the wall/gutter. Cutout needs to be painted to avoid future rust issues See image attached for reference. The front gutter is at the second floor and long lader will be required. I would like also to install a leaf catcher head in the front down pipe in order to avoid blocage of the down pipe (see exemple attached in photo)

change a rusted gutter at the back of the house, attach 4 timber window canopies and cut the edge of 4 plastic ceiling sheets at the back of the house - Due date: Flexible

swinging door has come loose from the hinge. Flyscreen needs repairing. Gutter -10m needs cleaning - Due date: Flexible

Repair hole in guttering and repaint the repaired section, approx 30cm. Need to tape the inside of the gutter and then repair with bog, sand and paint. Easily accessible from deck and has another roof 600mm under so no scaffolds etc needed.

Install a new piece of gutter 2m long. Already have gutter and stop-end. Extension ladder required. Existing brackets may need slight adjustment to enable correct water drainage.