Find a professional gyprocker contractor in WA

Same as previously mentioned

Plastering or gyrpocking over bagged walls

Currently looking for someone to install a few Gyprock CSR Plasterboards to a few wet area exposed walls areas after removing tiles and old plasterboard and need new ones installed before tilling bathroom. I will supply the materials as well

I am looking to have a gyprock wall installed in a new shop build. The wall needs to feature two door opening and one window opening. The wall is 5m long and roughly 3m high.

About 2sqm of water damaged ceiling (though material is well dried out) to be removed and disposed of asap, while work to repair a floor above is carried out. Reconstruction of the ceiling can then be done as and when convenient. Specified fee is for removal stage only. Feel free to discuss pricing for the whole job.

Gyprock and shelving installed to pantry I have all materials and structure has been installed

Holes in fridge cavity where power points used to be etc. Need patching only - no painting required (have spare gyprock)

GYPROCK sheets installations on wooden studwall with complete finish for ready to be paint. I will supply gyprock sheets. Must be experienced. Thank you

We currently have double doors to an bedroom and would like to change this to a single door. The old frame will need to be removed, a small stud wall will need to be built, gyprocked and new door frame.

The old office needs renovation. The brickwork is exposed so need plasterboard to cover that and the ceiling is old too. Need the old one gone and replace it with the new one.

IN THE PHOTO, CURRENT TIMBER WALL WILL BE DEMOLISH. the partition plan with the wall coded A.B.C.D.E.F.G *(The window/ door side of) wall A and the whole of wall B (except main entrance)to be framed with 51 mm stud and track, insulated, sheeted one side with 10mm plaserboard, flushed an sanded an ready to painted, *Walls C and D to be framed with 76 mm stud and track,sheeted one side with 10mm plasterboard an timber noggins were needed in wall C,flushed, sanded An ready to paint *walls E,F,G to be framed with 76 mm stud and track,sheeted both sides with 10 mm plaster boards,and insulation for clinic surrounding walls,with a 920 left hand split door frame,flush, sanded,ready to paint *bulkhead attached to wall D to be framed,sheeted,flushed an sanded ready to be painted. Please Note: i dont need Painting, the Painter will paint these walls. CEILING HEIGHT 2.7m WALL D AND B MEASUREMENT: 11.55 METER APPROX. OTHER WALL MEASUREMENTS ARE AVAILABLE IN THE PHOTO.

Flush a room 15m x 4 m. The gyprock was done and not all flushed. Also, the room has now been divided in two with a wall that requires flushing.

Flushing Gyprock on walls in a large room 15m x 4m. Ceiling is already done.”

Gyprock approx 12 sheets to my living room wall, super small area and cornices on the ceiling. I’ll buy all the materials

Gyprock panels need replacing

Need gyprock roof cardboard replaced. External perimeter of the house. Please let me know the price per square meter

Need gyprock plastering the joints only

Need to gyprock or plaster or render of about 10msq in the kitchen to look nicer over the brick wall

Remove stud and Gyprock walls partitioning some offices one long wall about 8 meters long with one small separating wall about 3 meters long Must be down properly removing Gyprock and framing

Shop being renovated. Looking for a plasterer to make good walls for painting, and patch some ceiling spots. Need it in the next few days, so happy to pay. Shop will be empty end of Friday. Happy to just pay for a day of your time to make it happen, and you can do the major spots, and anything minor that you have time for. Bedford.