A professional helping with water heater installation and repair.
A professional helping with water heater installation and repair.

Find a professional hot water system contractor in Sydney Eastern Suburbs

Fill in a short form and get free quotes for local hot water system contractors in Sydney Eastern Suburbs

4.3

Excellent rating - 4.3/5 (10900+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in Sydney Eastern Suburbs

Excellent service. Thanks!

Plumber- Fix hot water system

$200

Second time with Dan. Very helpful as always.

Hot water not working

$50

Professional and got everything done - even though is wasn’t a straight forward job. Would definitely use again.

Hot water tank plumbing and disconnect sink

$200

5 star service & performance. What more can be said?

Gas hot water

$120

Totally recommend. Right on time - perfect efficient fix.

Plumbing -reconnect hot water washing machine

$75

Fixed the hot water of our zip tap very efficiently

ZIP Hydrotap Hot water tap repair

$120

What's the average cost of a hot water system installer in Sydney Eastern Suburbs

$125 - $324

low

$125

median

$180

high

$324

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in Sydney Eastern Suburbs

based on 36 reviews

5

36
0
0
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

45+

Tasks successfully completed

3

Average amount of offers per task

5

 mins

Average time to receive offers

Statistics from the most recent tasks on Airtasker since 18th Nov 2020.

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in Sydney Eastern Suburbs

Install of Gas Hot water system and reline drainage

$1,000

Bellevue Hill NSW, Australia

14th Nov 2024

Replace gas water heater and remove old unit, Rheem 634265NO 265 Litre Outdoor,. Reline 4-5 metres of cracked section of Drain pipe.

Swap rinnai infinity hot water service for builders 26 bondi

$150

North Bondi NSW, Australia

10th Nov 2024

Swap a Infinity 26 for a builders 26 supplied by Owner easy install pipe footprint does not align as per photos easy access

Definitely can’t go wrong when selecting Michael to do your plumbing. Michael was clean tidy courteous on time and delivered on budget. Couldn’t recommend him higher.

Diagnose and Fix Electric Hot Water System (AquaMAX 250L)

$150

Paddington NSW, Australia

12th Oct 2024

I have a 250-liter AquaMAX electric mains pressure hot water system. The hot water runs fine initially but fades to cold after about 5 minutes. The system has two heating elements (4800W upper and lower). I need someone to test the heating elements and possibly replace a faulty one or address any other issues (thermostat, etc.).

Great service I would recommend

No hot water

$150

Randwick NSW, Australia

7th Oct 2024

We have an issue where our hot water isn’t working. We have a Rinnai 32 Infinity. The pilot light was out this morning, we assume from the wind last night and after restarting it, it’s still not producing hot water. It’s not fuse or gas supply related.

Friendly and efficient, a pleasure to deal with. I wouldn’t hesitate to recommend 😊

Hot water system

$500

Maroubra NSW, Australia

27th Sep 2024

Rheem 135LT pilot keeps going out. Cost to replace new or used It appears to be just pilot going out, so cost to repair this

Replace relief valve of hot water system

$120

Coogee NSW, Australia

27th Sep 2024

A tube that goes into our hot water system has been dripping occasionally. Someone told me that most likely the relief valve needs to be replaced. So we would either need to get this valve replaced or the dripping needs to be stopped in a different way

Good job and done quickly.

Under sink plumbing tidy and hot water check

$500

Coogee NSW, Australia

23rd Sep 2024

I’m Installing a new kitchen and I think the under the sink plumbing needs a tidy up and ability to have a dishwasher and washing machine in the kitchen. Also issue with water either cold or scalding hot. Maybe I need a new electric instant hot water system?

Good job easy to work with. Recommend!!

Plumber to install kitchenette and hot water/shower near bathroom

$1,000

Woollahra NSW, Australia

16th Sep 2024

Hi we have a small room in our garage/rumpus room that currently has a bathroom. We want to install a hot water line and outdoor shower feel somewhere around the bathroom probably on the left hand side as you can see in photo. Needs hot and cold at the moment there’s no hot in the bathroom but the nearest point is 2m away. Exposed copper is fine. We also need a sink installed for a kitchenette which includes hot/cold and waste. Please see photos attached. If can come today or tomorrow and start work would be great

Such a nice guy, top work and went above and beyond to do the job efficiently and to a good standard. Will most definitely use again.

I NEED LICENSED PLUMBER / SPECIALITY IN SOLAR HOT WATER

$100

Maroubra NSW, Australia

18th Aug 2024

I need licensed Plumber/ specialty in solar hot water. From a couple of days ago, we do not have a hot water from one of the bathroom, it runs by solar energy.

Certified plumber to replace a hot water boiler

$500

Bondi NSW, Australia

2nd Aug 2024

My boiler stopped working. I need to replace it today or latest tomorrow. Anyone available and affordable?? I am checking how many liter it is the broken one. Please give me the price for 80L Rennai and disposable.

Hot water tank dismantling and then removal

$500

Bondi Beach NSW, Australia

1st Aug 2024

I need an old 250 litre gravity fed water tank drained, cut down with an angle grinder and then removed from the roof cavity in my apartment block. This is a two person job and please confirm you have experience in this type of work and necessary tools, ladder etc . Please see attached image. This job will coincide will a plumber who will then be installing a new mains pressure tank once this old tank is removed.

Replace instantaneous gas hot water system

$85

Kingsford NSW, Australia

28th Jul 2024

Current system is Bosch. It still works but sometimes it causes vibrations and noisy (hammer sound - must be due to its old age as the noise only started not too long ago). I am thinking of replacing it with a similar one, either Rinnai B26 or Rheem 26. It should be a straight-forward replacement. It's installed at around 2m+ high. No accessory like temp control is installed.

Move my hot water heater down one flight of steps

$125

Coogee NSW, Australia

12th Jul 2024

Need to shift a hot water heater from 1st floor to ground floor

Did the job perfectly. Great to work with. Pleasant and considerate.

Dishwasher and small hot water tank to be moved down 7 sets of stairs

$70

Bellevue Hill NSW, Australia

11th Jul 2024

I have a dishwasher and small hot water system to be moved down into my garage- there’s 8 steps per stair case and 7 stair cases- so fifty steps. You will need a trolley

Replace hot water circuit breaker.

$80

Maroubra NSW, Australia

30th Jun 2024

I need to replace the hot water circuit breaker with a new one that has wifi connection

He was very good with what he is doing. He finished the job successfully.

Fix Gaggia Classic coffee machine. No hot water coming out

$90

Randwick NSW, Australia

24th Jun 2024

Water is not heating on my Gaggia Classic coffee machine. The machine turns on and pulls water but it is cold when it comes out.

Replace hot water valve

$200

Maroubra NSW, Australia

20th Jun 2024

Hot water ain’t working, and the building plumber believes the white valve needs replacement. Price is for valve replacement + service fee.

Fix the hot water flow in shower

$250

Kensington NSW, Australia

19th Jun 2024

Diagnose and fix the shower hot water. The hot water is slow to start and the pressure is very low once it starts.

Great guy, great job. Quick fix.

Birko hot water system not working

$50

Kensington NSW, Australia

18th Jun 2024

Boiling water system is not working

Instal gas hot water heater

$1,000

Kensington NSW, Australia

12th Jun 2024

I have currently electric boiler 125l and it’s too small to keep enough hot water so I wanna install continuous flow gas heater- yes there is gas installation on the property.