A professional helping with water heater installation and repair.
A professional helping with water heater installation and repair.

Find a professional hot water system contractor in West Melbourne

Fill in a short form and get free quotes for local hot water system contractors in West Melbourne

4.3

Excellent rating - 4.3/5 (10900+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in West Melbourne

Quick response and very flexible to accommodate client requirements. Highly recommended!!

Fix the intermittent hot water issue

$200

Excellent Job done by Nathan. Punctual and thorough in his job.

To replace a leaking pipe on the hot water system

$90

Very quick.

Hot water doesn't come out

$60

Great all round

Hot water shower taps turns but now water

$100

Great work by Jye and amazingly friendly. I would strongly recommend him for plumbing work.

Hot water unit issue

$40

Great communication skills. Quick and efficient work! Completely job within hours of being assigned job!

Pipe burst on hot water tank outlet

$300

What's the average cost of a hot water system installer in West Melbourne

$100 - $222

low

$100

median

$150

high

$222

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in West Melbourne

based on 130 reviews

4.88

123
3
1
1
2

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

169+

Tasks successfully completed

3

Average amount of offers per task

16

 mins

Average time to receive offers

Statistics from the most recent tasks on Airtasker since 27th Dec 2020.

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in West Melbourne

Pluming connecting the hot water system in to 3 taps water

$500

Footscray VIC, Australia

3rd Dec 2024

Hi, I need to install the hot water system connections for the 3 water sinks, this will be on the outside behind the sinks and the waist water. Hi, I made some drawings “I’m not expert” what really I need, 1 connect the waist water, 2. Put/ connect the hot and cold water to the tank “how it call it” we need some parts for that, I can go to Bunnings and buy it or you can go purchase it and will pay for the materials. Separately to the job.

Seal of Burst Hot Water Pipe (H Pipe)

$150

Tarneit VIC 3029, Australia

2nd Dec 2024

I need a professional plumber to fix a burst hot water pipe (H pipe) near my washing machine. The pipe is spraying water uncontrollably, and the individual valve cannot be shut off. I’ve turned off the main water valve to stop the water flow temporarily. The adjacent room’s carpet is soaking wet, and I suspect a burst pipe or major leak The job involves identifying the source of the leak (potentially from the H pipe or a pipe inside the wall), fixing or sealing the affected pipe to ensure it is watertight, and minimizing damage to the wall by cutting into it only if absolutely necessary.

Professional & efficient

Fix hot water unit

$100

Sunshine VIC, Australia

30th Nov 2024

Help us to diagnose and fix hot water unit

Need to fix hot water system

$100

Tarneit VIC, Australia

25th Nov 2024

Some one broke the new hot water system

Emergency plumber for hot water geezer leakage

$100

Melton South VIC, Australia

24th Nov 2024

My hot water geezer has a leakage need plumber on urgent basis

Gunn is very professtion and knows his work.

Gas hot water system broken down.

$200

Cairnlea VIC, Australia

21st Nov 2024

My Vulcan 135L gas hot water system has broken down and water is leaking inside. Tried to re-light it but was unsuccessful. Model number is 641135NO.

Fix Midea hot water system

$150

Truganina VIC, Australia

17th Nov 2024

Hot water system not working. Maybe faulty thermostat? The hot water comes on for around 10minutes randomly in the evening, but is then cold again until another random time the next day.

Great service, very prompt with responses, fairly priced and very professional.

Hot water Supply isn't working

$100

Wyndham Vale VIC, Australia

11th Nov 2024

hot water system seems to be experiencing some issues. possibility of a water pipe leak or a disconnection problem. We require a plumber to look into this issue and offer a solution

Great . Thanks for help

Clean hot water tank filters and replace anode

$260

Albion VIC, Australia

11th Nov 2024

Price includes a brand new anode and labour charge to replace the old one. Filters will be cleaned along with the tank socket. - View all the details of this offer: https://www.airtasker.com/offers/01JCD5V5778MNDNRR2A1QPZCWB

This was my second time reaching out to Patrick, and he resolved the issue immediately. Super professional!

Plumber, for 3 sinks & hot water sistem

$1,500

Footscray VIC 3011, Australia

31st Oct 2024

I need a plumber to install 4 sinks, all next to each other, the bench top where they will be will be is 1800mm, it would also necessary to connect the hot water system under the sinks. The place provides the plumbing connections to the outside of the container and the service is to do the internal plumbing. we provide the sinks, and the water system. NOTE: The work is for a tiny shop, the walls are made of EPS sandwich panels, that is (one 1.5mm aluminum, 50mm of styrofoam and another of aluminum), the idea is to do the work on the 20 of November. We are located in Footscray 201, Ballarat Road.

Install electric hot water system Laverton

$400

Laverton VIC, Australia

29th Oct 2024

I will get this unit delivered Thermann 250THM1 250 Litre Electric and would want to get someone installed. If you are a plumber only fine just quote for the plumbing costs. Attached image of the one that I currently have that need replacing. Only licensed plumber quote and also with good.reviews.

Hot water leakage in tank

$200

Brookfield VIC 3338, Australia

26th Oct 2024

Hot water tank one pipe needs to be fixed. (small hole)

replace hot water tank pipe

$70

Hoppers Crossing VIC 3029, Australia

25th Oct 2024

Leaking line from hot water tank

Fix hot water system

$150

Wyndham Vale VIC, Australia

24th Oct 2024

Need some help with hot water system urgently .I don’t have hot water in the tap since couple of days.I have a gas hot water system.I am adding couple of photos of the heater

Chris came on time as promised and fixed the water heater quickly.He is polite and respectful .I am happy with the job.Highly recommended

We're looking for professional Hot water system installer

$5

Truganina VIC 3029, Australia

24th Oct 2024

We're looking for Professional Hot water system installers to work with our company, we need the Electrician and plumber. Should be certified for Gas Capping, experience in working under Government Scheme. Immediate start available. Price is Negotiable, please contact us to discuss the price.

Hot water connection

$250

Harkness VIC, Australia

21st Oct 2024

There is no hot water in the house

Replace kitchen sink tap and fix the leak with the hot water system

$150

Werribee VIC, Australia

15th Aug 2024

I need to get my existing kitchen sink tap replaced with the new one. Also, need to get the leak with the hot water system fixed.I've attached photos for the kitchen sink that needs to be replaced and the hot water system that is leaking.

Showed on time. Identified and fixed the issue quickly

Hot water service

$100

Point Cook VIC, Australia

31st Jul 2024

Having trouble with hot water in the shower in the mornings these past 2 weeks. Hot water turns on for a few minutes and than cold but only in the morning and it's just been happening on random occasions which is strange.

Josh and the team are very professional and friendly. Great communication and genuine. Definitely recommend and use again in the future.

Hot water system

$150

Fraser Rise VIC 3336, Australia

16th Jul 2024

I have an issue with my ho water system Hot water goes on and off. It is situated on the roof of my townhouse and I think it's connected to my solar panels

Very good and honest

Help with hot water service

$55

Caroline Springs VIC, Australia

17th Jun 2024

The hot water tab is not having the pressure. We want someone to come and fix this as it was working earlier but now it's not working from last 3-4 days. It's like the hot water is not having pressure properly we only have 10% water coming out of the tap but the cold water is having full 100% water. Can anyone suggest possible issues?

Thanks for helping on urgent notice! Great skills!