Find a professional wrought iron fence service in NSW

I would like to install a classic metal garden fence for our front garden. Length is approximately 6m and a straight line so is not a very complicated job. Will include supply of new fencing and gate as well as installation thereof. If necessary we can source our own fencing but just need to be pointed in the right direction.

I need to build a corrugated iron fence around my pool area, dressed up in timber hardwood frame, The fence will be fixed on-top of my sandstone blocks + on top of my timber deck. My timber deck also requires a bit of fixing, sanding and new staining

I have a wrought iron fence and need some additional horizontal “strips” added to the fence

I require a person to assist in having roughly 8 to 10 panels of wrought iron fence installed. The panels are already made, just requires a handyman that has some skills in levelling to drill them and dyno bolt onto concrete blocks. The panels are light, and ill have someone to assist and hold the panels. Fence panel heights are 500mm and roughly from 0.40 to 2m wide

Two wrought gates , length roughly 1.2m and width about 0.9m, need to be repainted to ensure whole gate has same color.

Replace front wire fence that is anchored with cement with a wrought iron fence. - Due date: Flexible

Need a fencer / welder to install a wrought iron fence (similar to what you in parks) about 3m for guard dog at side of the front of our heritage brick home. - Due date: Flexible

One wrought iron gate ( from a pair)needs the stabilisation pole to be reset in concrete and gate reattached , so that both gates are alligned and can be closed. Have photos. - Due date: Flexible

Install a wrought iron fence/gate at the front of house. Approx 4m long

Need a piece that has come off riveted back to the fence - Due date: Before Sunday, 8 October 2023

Install and drill an aluminium letterbox on a wrought iron fence at our terrace house - Due date: Flexible

Repair cast/wrought iron fence. The fence has one sprearhead broken and needs to be re-attached - I have this spearhead. The gate is missing a catch for the gate latch to lock into. The gate is also missing 4 spearheads. - Due date: Flexible

Hi i need an existing concrete fence demolished and a new 3.8m curved concrete hob built, to enable a wrought iron fence to be installed. - Due date: Flexible

Hang sheets of iron around the pool boundary fence line to cover rails. This has been half done just need it finished. I have purchsed gates for the sides of the house but will need someone to install them. This will involve removing old gates, installing poles and hanging gates. - Due date: Before Monday, 10 July 2023

On the entrance of house, the manual iron gate, the bolts have come off. And it is not closing properly. - Due date: Flexible

Need our wrought iron gate repaired as it no longer locks and our fence repainted. - Due date: Flexible

Supply and fit a child proof pool lock to a wrought iron gate - Due date: Flexible

I have a set of two new wrought iron gates that measure 200cm (w) by 185cm (h) complete with two hinge posts. The hinge posts need fixing to the stone pillars that are at the entrance to my drive. Some stone will need to be ground / chiseled from the pillars to create a flat surface where the posts are fixed. The gates are heavy ( 100kg +) - Due date: Flexible

Build corrugated iron fence to act as a visual barrier along back fence. 10m wide, 1m high. Chippy/ handyman job - posts into ground, nail to corrugated iron Please buy materials (monument corrugated iron, posts) and will reimburse outside labour cost. - Due date: Needs to be done on Monday, 3 April 2023

6 old verandah posts replace and the corner laceworks with friezes.