Find professional picket fencing services in South West Perth

We want replicate a gate we have on the side of our house at the front at the rear of the house. The width of the gate will be just over 1000mm. Height will be 1840 from the ground at the highest point. Attached are photos of exiting front gate and position of new gate. New gate would preferably have pool grade hinges and latch.

i need a wooden picket fence installed. we can get all the meterial from bunnings

One fence panel damaged by fallen branch. (1920x900mm). 16 of the original pickets are good 3 are broken. Supporting horizontal timber is broken.

Hi, I am wanting a wooden picket fence built on my retaining wall with an electric sliding gate across the driveway. The retaining wall is approx 11m long and gate will is approx 6m. Fence height to be .9m and gate 1.2 as the driveway is approx .3m lower than retaining wall. We do want these to sit level with each other. We are also hoping for the gate to have some kind of pedestrian access gate built into the main gate. Below are some pictures of the style and examples of what I am after as well as our yard. - Due date: Flexible

We have an old wooden picket fence at the back with a few pickets missing, just enough for the dog to be able to get through. (Landlord taking too long to fix).We have 3 star pickets and a sheet of flexible colour bond. I just need someone to prop the sheeting in and hammer the star pickets in. Open to advice if there's a better way to do it. - Due date: Before Monday, 11 December 2023

Supply and replace approx. 1M of treated pine picket fence. Will need fencing, corner post and two horizontal rails. No painting required. - Due date: Before Friday, 13 October 2023

Install 8metres of picket fence - Due date: Flexible

I would like a wooden or PVC pocket fence and double swinging manually operated gate supplied and installed across the front boundary of my house. The fence is approximately 10m and gate spans an approximate 3m driveway - Due date: Flexible

We’ve had some damage to our picket fence and need someone qualified to repair it . We have our own painter so needs three posts replaced and likely four rails as a guide. Noting the pickets may be reused if handled correctly , sourcing the identical shape is essential. Must use minimum H4 Timbers for garden and wet areas Must punch and fill to a smooth finish all fixings noting the palings are attached with plastic coated screws to avoid future rust marking - photos available. Must utilise the same connection format to ensure future temporary panel removal - photos available Must advise proposed concrete footing size Must cut top section of posts with a slope same as other to prevent water ingress Must remove from site old materials We will require a formal written quote and on-site meeting to proceed with an offer. Due date: Flexible

Front gate - picket fence repair. Post holding gate needs removed and reset in ground, as post hit by car knocking the gate out of place . - Due date: Flexible

Picket fencing. I have material ready . Just need someone to put all Together - Due date: Flexible

Install 380 of fence pickets 900mm high on fencing rails I will supply nails, pickets and nail gun Date and time flexible - Bottom of pickets to be 100mm below bottom of lower rail - 1 nail per picket per rail - All pickets to be vertical - Pickets to follow rail height (two rail sections slope up approx 90mm) - Nail gun to be adjusted so head of nails is driven just below surface of rails - Gap between pickets to be approximately 35mm (equally spaced so pickets line up at corners/ends) https://www.bunnings.com.au/diy-advice/building-construction/fences-gates/how-to-install-pickets-for-a-picket-fence

Picket fence , about 8 Mtrs Have pickets

Pick up 4 x 2m picket fences Palmyra drop off willagee

Looking for someone to build a 7m timber picket front fence. There is currently nothing in the spot - very easy access. Details: Approx 7metre long x 900mm high front fence. Full installation - concrete fence posts in & attach pickets. I can supply materials or you can quote to supply. I will paint myself. Flexible on timing - looking for a decent job, must be able to make the fence level and look good from the street.

Approx. 12.5m long picket fence required (1.4m pickets). Will need a pedestrian gate and gates over driveway.