Find professional pool gate repairs in Baulkham Hills & Hawkesbury

Both pool gate locks don’t close properly

I need a compliant pool gate to be provided and installed as per the following details: Size: 120cm height (minimum) x 111cm width. Features: * Magnetic latch pool safety lock and self closing hinges (from any positions). * Location of the lock is shown in the picture. * The gate should open/swing only in a direction away from the pool area. * Colour to match the existing fence (as per the image). Notes: * Gate and all materials should be provided and mounted. * The work must get approval from the council inspector. Here is the advice by the local council for compliance: * Pool gate must be made child-safe by means of a lock, latch, bolt, chain or other child-resistant device, located at least 1.5m above floor level. * The access gate/s shall be fitted with an automatic closing device that will shut the gate and operate the latching mechanism from any position, even with the striker resting on the latching mechanism. * The access gate/s shall be mounted so that they swing only in a direction away from the pool area. Thank you.

Need to get the pool glass door repaired might need new hinges - Due date: Before Wednesday, 20 September 2023

Repair pool gate to ensure it self latches. May include installing new mechanism and hinges or replacing panel to ensure gate closes and self latches. Must be on site at 7 am as owner is not always home. - Due date: Before Thursday, 29 June 2023

Unable to adjust hinge tension, gate won’t self close - Due date: Flexible

replace broken lock on pool gate - Due date: Flexible

Self closing mechanism needs fixing, glass door scraping along top of mechanism. 2 panes of glass where they join the posts also need some new rubber installed. - Due date: Flexible

Install pool gate by putting it on hinges Have hinges already purchased however pool gate is steel so requires a powerful drill etc Latch is still in place just needs hinges - Due date: Needs to be done on Sunday, 2 October 2022

The gate keeps leaning down (hinges aren't aligned) ​and won't secure in the lock when we close it. We have to lift it up to try and get it to lock, doesn't always work and the magnetic part isn't catching. We are supporting someone with a disability in this house and it is a safety concern, if someone could come out soon that would be appreciated - Due date: Before Wednesday, 2nd Feb 2022

The gate needs to be slightly realigned to stop it hitting adjacent stonework which causes the gate to jam on the stonework and not swing closed automatically as it should. - Due date: Flexible

Put new locks on Pool gates and put resus chart on wall. Also need wooden access door under house reattached to frame.

Hello, We need our pool gate repaired, the hinges and the latch mechanism. The repaired gate should self-close. Looked into magna latch but they seem to be made to fit square gate posts. Flexible with date. Pics attached.

I need an experienced handyman to fix the pool gate and make it self closing. The hinges need to be possibly changed and adjusted so that the gate can self close. Gate hinge must be a WALL/POST TO GLASS GATE HINGE 46x55x110mm AC1036 with a pointy end so that a 900mm separation is not required. The work needs to be guaranteed so that pool compliance certificate can be obtained.

I need someone to replace the hinges on a glass pool gate. I will supply the new hinges from Polaris. Flexible with the date the job can be done. Based in North Kellyville.

Top holder of the pool gate has come off. Please check the photos