A beautiful pool table with blue felt in a bright room with floor to ceiling glass windows.
A beautiful pool table with blue felt in a bright room with floor to ceiling glass windows.

Find an experienced pool table assembler near you

Fill in a short form and get free quotes for professional pool table assembly services

4.3

Excellent rating - 4.3/5 (10900+ reviews)

When you need help with pool table delivery and assembly

  • Pool table setup
  • Snooker table assembly
  • Billiards table assembly
  • Refelt pool table
  • Pool table assembly
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated pool table assembly services near me

Recent Pool Table Assembly reviews

Really good work, Luke is patient to do this work well, I was satisfied for that. Thanks so much Luke!

I need pool table assembly

$200

great work ..gem of a person and very helpful ..will def recommend

Assemble 7ft mdf pool table

$50

Very very pleased by the way pool table was assembled . Very nice and precise . Highly recommend . Thanks heaps :)

Assembling pool table

$100

Very thoroughly done.Good service.

I need pool table assembly

$150

Dave did a great job with a complex assembly job.

Pool table assembly

$100

Did an excellent job of putting the table together. Couldn't ask for anything better.

I need pool table assembly

$150

What's the average cost of a pool table assembly service

$160 - $383

low

$160

median

$250

high

$383

Low, median and high bar chart distribuiton

Average reviews for Pool Table Assembly Services

based on 225 reviews

4.97

221
3
0
0
1

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

272+

Tasks successfully completed

2

Average amount of offers per task

35

 mins

Average time to receive offers

Statistics from the most recent tasks on Airtasker since 19th Apr 2021.

Why hire a Pool Table Assembly service through Airtasker?

While you may be excited to set up and use your brand-new pool table right away, it’s more cost-efficient to hire a pool table assembly service from Airtasker, especially if you’re not used to assembling tables. The specialists you hire to do this job are more adept at pool table assembly - avoiding all possible damage to your new pool table.

Booking a pool table assembly service via Airtasker is also more convenient. You don’t have to pore through websites of different service providers and wait for emails. There’s no need to go around town to look for a service provider - our platform can bring local experts right to your doorstep. Not to mention, you’re free to do other things or relax as your Tasker does all the work in your games room.

All you have to do is make a job posting on Airtasker. List down all the details, including: specifications of your pool table, your budget, your address, and time. Taskers will approach you about your job, give you a free quote, then get to it at a moment’s notice.

Real reviews

Judge for yourself – every pool table assembly task gets a review.

Offers in no time

Start getting pool table assembly offers to do your task ASAP!

Flexible pricing

Choose the offer that’s right for you.

Local, skilled pros

Take your pick of skilled Pool Table assemblers nearby.

Top Pool Table Assembly related questions

Given that some processes in pool table assembly involve precision levelling, cutting and allowing adhesives to dry, the job can take anywhere from 4 to 8 hours. Other factors that can make the time shorter or longer include the level of expertise and experience of the specialist. For instance, if you have a Brunswick pool table, hire a specialist that’s acquainted with this brand to make assembly go faster. However, a job like this shouldn’t be rushed.
One of the main benefits is foregoing the difficult work of putting the frame together, handling the heavy slate pieces, doing a lot of measuring, and tightening bolts and screws. You don’t have to deal with stretching out the felt and risk tearing it or having wrinkles. There are many things that can go wrong when assembling your pool table, and hiring a specialist to do it for you helps you avoid any headaches.
In most cases, no. Specialists are expected to have all the necessary tools and safety equipment for doing the jobs they were hired to perform. You are not obligated to supply specialists with any of the needed tools or equipment, although you may still offer whatever tools you think may help in making their job easier and faster.
Yes. You can hire Taskers for pool table disassembly as well. Since this can be complicated and there can be a risk of injury or damaging your pool table, it’s advisable to hire experienced specialists to do the disassembly. You can find specialists for this in a related service page, that of playground assembly. Note that services vary from specialist to specialist, so please mention that you’re hiring someone to take your pool table apart and not putting it together.

What do pool table assembly services include?

Pool table assembly services include necessary steps to make your pool table ready for play. Specialists will go to your home and assemble the legs, corner frame and the frame, lay down the playing surface, cover the surface with felt, cut the ball pockets, install the railings and secure each part of the pool table with the supplied washers, nuts and bolts. Specialists will also work to ensure that it’s perfectly level for the years to come.

Assembling the legs, corner frames and cabinet

Assemblers usually follow the enclosed pool table assembly instructions. They will assemble each of the four legs and bolt them along with the supplied nuts, bolts and washers. They usually assemble the corner frames, cabinet and legs while ensuring they are flush and made secure with washers, nuts, bolts and wood screws. To finish, they place the corner trim pieces, making sure that these pieces are flush with the bottom and top of the cabinet. Specialists may do some minor sanding if the trim pieces aren’t flush with the cabinet.

Installing the inner frame

Next, the specialists install the inner frame beams. These will support the playing surface, usually consisting of three slate blocks. The usual practice is for specialists to lay down the wood beams and tap them into place with a rubber mallet. Specialists install the frames and ensure that the structure is both flush and sits level on the pool table cabinet.

Playing surface assembly

After installing the frame and ensuring its level, laying down the playing surface is the next step. The playing surface usually consists of three heavy sheets of slate. Slate support blocks are first bolted onto the inner frame to accommodate the playing surface. After that, specialists screw the three slate pieces onto the support blocks, using the pre-drilled holes on the slate pieces. Specialists can ensure that the slate pieces are flush and level, then seal the seams between the pieces with drywall spackling.

Installing felt playing surface

After assemblers fill the seams between the slate pieces with drywall spackling and allow this to dry, they clean the surfaces of dust and debris. They then drape green felt on the slate, and attach the felt section by section with industrial adhesive, pulling taut on the felt as they go. Assemblers then cover each of the pockets with the felt, smoothing out any wrinkles as they glue the felt down. They spray the felt with adhesive and clamp it down for a couple of hours.

Installing the Rails

The top wooden rails are laid out over the felt, with the leather ball pockets fitted onto the rails. Each piece of the rails and the six pockets are bolted together. Once assembled, the wooden rail frame is placed on top of the felt. This is then aligned with the notches for the pockets. Your assembler then bolts down the wooden rails, then attaches pocket screws to the wood-slate frame, completing the assembly.

Recent Pool Table Assembly tasks

Reassemble pool table

$200

Harrison Ward VIC, Australia

19th Apr 2025

Need to reassemble my pool table from rumpus to pergola

Build a slate pool table

$400

The Ponds NSW 2155, Australia

17th Apr 2025

Just bought a second hand 3 piece slate pool/billiard table. Will need someone to set it up and build it. Comes with no instructions as purchased second hand disassembled. So will need someone who has experience building a table before. It is very heavy as it’s a slate table. Will need atleast 2 strong people to lift and level it correctly. Please see picture what the table is supposed to look like, and what it looks like now.

Pool table assembly

$100

Werrington NSW, Australia

17th Apr 2025

I need someone who can assemble 7ft pool table. Which i have bought from kogan. Thanks

Hello, I need someone to reupholster a pool table

$250

Arncliffe NSW, Australia

17th Apr 2025

Not a full size pool table but the same size as most pub pool tables. Just the slate part of the table needs doing, not the banks. Material will be provided

New 9ft carom pool table installation

$300

Villawood NSW, Australia

17th Apr 2025

Could you please install new pool table? Thank you.

Help Assemble and level 8FT 3 piece slate pool table

$200

Beenleigh QLD 4207, Australia

15th Apr 2025

Needing professionalhelp with re-assembling pool table

Assemble a pool table

$100

Gledswood Hills NSW, Australia

12th Apr 2025

Assemble a 8 foot pool table

8 x 4 pool table refelt asap

$5

Maroochydore QLD 4558, Australia

10th Apr 2025

need a 8x4 pool table refelt asap

Slate pool table from Ksports 8ft

$150

Horsley Park NSW, Australia

10th Apr 2025

build a slate pool table from Ksports - 8ft table

Assemble a 7FT Slate Pool Table (from Eeeza)in Hurstville area

$200

Hurstville NSW, Australia

7th Apr 2025

I’m looking for someone with experience assembling slate pool tables (it’s a 7FT one from the Eeeza brand). Please only respond if you know what you’re doing. I’m handy myself and will be around to give you a hand during the assembly, so you can come on your own to help keep the cost down.

Ensemble a pool table. About a 4 hour job.

$200

Hilbert WA, Australia

6th Apr 2025

Need someone who is good at putting kitset furniture together. The pool table has come in the form of 10 boxes. It has a manual booklet and there is a help line for ensemble if needed.

Did a great job and very efficient! Highly recommended

Pool table refelting

$50

Colyton NSW, Australia

31st Mar 2025

Table top refelt and replacement, can do it mobile as the pool table is heavy

Pool table assembly

$150

Lesmurdie WA 6076, Australia

8th Mar 2025

Pool table assembly flat pack 8ft table

Awsome thankyou great job

Assemble Eeeza 7ft Pool Table

$200

Strathmore VIC, Australia

9th Feb 2025

7ft Eeeza Slate Table, to be assembled..

Emerson did a terrific job, he really knows what he's doing I recommend him highly.

The assembly of a 3 in 1 pool table

$150

Brisbane QLD, Australia

18th Jan 2025

The assembly of a 3 in 1 pool table On Sunday afternoon - View all the details of this offer: https://www.airtasker.com/offers/01JHVGMFZHBZ23A104TEZZE4V3

Third time we’ve booked Tatsuya, fantastic help again. Thank you. Highly recommend.

The legs attached to the pool table.

$60

Wilston QLD 4051, Australia

14th Jan 2025

The legs attached to the pool table. On Wednesday day around noon. - View all the details of this offer: https://www.airtasker.com/offers/01JHHHBHG1PTD5KNTFA3MQPD10

Second time we have booked in Tatsuya. Once again excellent job. Thanks so much.

Attach felt to slate pool table

$250

Springfield QLD 4300, Australia

22nd Dec 2024

New pool table slate top coushes are assembled but need felt attached to slate top

Del was awesome. Did a fantastic job and then went above and beyond the task to help fit the rest of the table. 200% recommend

Assemble a pool table

$200

Strathfield, New South Wales

22nd Dec 2024

Need 2 strong men to assemble pool table as it is a holiday gift for me son.

It was explained that the task would require 2 men as II’m disabled. He insisted he could complete the task solo. We were unable to get the cover of the pool table upstairs without yet a third person (my son assisted but still too heavy) so ping pong/pool table cover left downstairs in the garage. He was very nice and pleasant and made sure everything was level and balanced.

Assembly of a 9ft slate pool table

$350

Tarneit VIC 3029, Australia

12th Dec 2024

Purchased a 9ft slate pool table that needs to be assembled. The pool table is already in its location, so moving not needed - just assembly to perfection. Please note - I am unsure of how much realistically the assembly should cost. So, will go by quotes and any information provided to me by the professionals.

Great, honest guy. Will use his service again if I can

Assemble Pool Table during business hours and remove rubbish

$350

Collins Street Precinct VIC, Australia

4th Dec 2024

Assemble pool table from flatpack

Simon was fab he is great