Find an experienced retaining wall contractor in QLD

H4 treated pine retaining wall required. Length 20m and maximum height is 600mm. Easy access via garage.

Move 25m2 of concrete sleeper retaining wall to boundary Add an additional 10m2 of sleeper wall Build a 40m colorbond fence

Approximately 20m of concrete sleeper wall and 50m of garden wall and 3 blocks high. Have materials already.

Looking to replace the first (bottom) level set of posts and sleepers. Here's what I will purchase to replace the first level. Appeox 28 composite sleepers (200x50x2.4) 7 sleeper posts (200x75x2.4) Geotechnical fabric 60m x 2 20 bags postmix concrete Anything else including tools you will need to get. Not sure what to price this at so started at $500. You would need to have your own tools to complete the job. Should take a professional 2 days to complete. Questions please ask. I will also be able to assist. Cheers!

small retaining wall need to be repaired

Require front retaining wall (staggered) repaired and replaced

Build a small retaining wall that is curved and measures 6 metres long, 60cm high. It can be built with small masonry pavers or concrete. The job requires demolition of the existing wall (which was damaged by recent rains) and removal of waste before constructing the new wall. Please provide an estimate of the cost.

I need a 17m long and 0.9m timber retaining wall replaced in Forest Lake ASAP.

I’d like to put a door way through a current wall. It a load bearing wall. We just need the beam removed and to make sure the arch is distributing weight correctly. We do not need it re plastered just the hole :) Space will be cleared out for you to work. Electrical cords will be removed prior to start of work

Supply all labour and materials to: a. Remove existing 100x50 treated pine at the top of retaining wall and replace with new timber. b. Install two vertical treated pine braces at the back of each panel of fence with 100x75mm sleepers bolted in for strength. c. Re bolt fence posts to the retaining wall

Need a quote for Material plus Labour for sleeper timber retaining wall, length is 15m and max height is 600mm. From the picture, it will be after my neighbors garage until the end.

The excavation and base are done. We need someone to get the blocks in before the rain.

I’ve got 17 x galvanised UC sleeper posts that require cutting. There are ‘C’, ‘H’, and 90 degree posts. These are to be cut at the specified height and there are to be no burrs. I’ve attached some photos for reference. Method to be noted in submission.

Hi. I’d like someone to remove some concrete steps, an old retaining wall, and some dirt behind the wall. I have waste vouchers for this job.

A bunch of rotten sleepers need replacing before Xmas. Have started to remove but don’t have the equipment. Single 200mm sleeper x 3000mm approx and potential replace posts.

Need four X holes dug 600mm deep to take H supports for retaining wall see photos

Hello, we are looking to get our timber retaining walls painted so it matches our concrete sleeper retaining wall. We have the paint but you’d need to provide your own paint brush/roller or spray gun. If a spray gun is used protective sheets/tape will need to be used to not get overspray around. We are flexible on timing and dates. We will clean the walls before you paint them.

Spray paint retaining wall in monument black colour. About 30m by 1-1.5m You will need to supply paint

Require a brick layer to build on top of existing retaining wall to increase the height. By one brick all way around. The bessor brick size is width 140x390x190. There is about 8 m required of brick laying Pls include materials in quote

Part of our timber retaining wall has rotted and is falling away, concerned the soil behind and fence above may collapse, approx. 1.5-2m of repair needed, sleepers 3 high 50mm x 200mm