Find professional roof installation services in QLD

Would like to install a Roof Vent Hatch with Fan on my Van. There is an existing one so it needs to be removed and installed a new one. I will supply the fan as attached in the photos

Need a few sheets of the poly or tin corrugated sheeting installed on deck roof. No gutter required. It is on second storey. Refer to photo for example of similar unit which has sheeting installed.

Needing rhino roof racks removed from a hyundai iload and installed onto a LDV G10 Van. Also need another set installed on another LDV G10 van but they are already off the old van. Will most likely require some different fittings for correct installation

Installation of a flyover roof to a carport

I have a kings grand tourer lite. Had some trouble with mounting it as I have slimline racks. Will need to find a work around. You’ll need a ladder.

Install roof racks on my Mazda CX3

Need roof lining installed on my Holden commodore already have the material just needs to be installed..

Need quote for patio roof installation asap and roof to be installed Thursday 28th Nov at the latest.

I have 4 roof speakers that need to be installed into the roof as well as the amp connected. All the wiring is done just need an electrician to hook them all up.

Roofer to help install roof sheets & foil blanket all materials supplied 204sq.

Install roof sections on garden shed.

Supply and install roof sheet to replace the existing one as shown in the picture. I would like the materials as shown in the picture too.

Install Thule Multilift 572 roof hoist on garage ceiling. Roof hoist supplied, however 14 suitable fixtures to attach to ceiling are required. Ceiling is standard height plasterboard with timber joists. Hoist to support a maximum load of 100kg for suitable fixtures.

Install Yakima roof racks to a 2016 Toyota kluger (no roof rails). Has to be done Sunday morning before 10am.

Install roof insulation.

Someone required to fit and install roof racks to car

Hi 2 jobs needing to be done on site job 1 - Pool House Need to cut and install 1 side flashing on a insulated panel roof on 1 side of a pool house will need some minor brackets made to fit to roof have uploaded pics and you can see there is no ridge on the roof that side have to make a ridge type thing out of brackets or similar , need to bend the side flashing nicely to mach profile of other sides shown in picks install 1 gutter, end caps and dowpipe all meterial is supplied by me including screws and endgaps. Job 2 cut down supplied side flashing for a shed insulated roof panel, will need to trim off the flashing to make it fit, will be 2 offcut that need to be joined will need to angle grind off a bit have the parts we cut already for you to check. please supply approx 1 x 2m long gutter ( prefferably in jasper ) end caps and downpipe fitting to be fitted to existing panel roof.

We need to Colourbond (or equivilant) ideally in monument colour to match existing to the awning to try and make it more watertight. Works to be done: 1. Supply and install sheeting 2. Install sheets on top of the steel/ timber awning 3. Screw into the timber to secure 4. Cut out ridges to make the sheets flush to external wall 5. Seal/ silicone all joins to make watertight 6. Ensure there is a slight gradient so so water flows awat from the building Notes: - Please includes all fees, materials and so forth in your quote - Awning is approx. 3m above ground - Located in Spring Hill - Awning is approx. 10m x 2m - Please ensure you are experienced & insured Thank you

New insulated roof , 75mm thick , 6 sheets are 6.8 meters and 4 sheets 4.8 meters , fly over on 3 sides , price off full installation , I will supply all materials, size off roof is 10.5 meters wide by , 6.8 long & and 4.8 long , install only thanks

Remove existing flashing, cut out gutter and then install new flashing that is onsite.