Find professional sliding gate repairs in West Brisbane

A front sliding gate either electric or solar is preferred.

Drive way has 5.6m opening, needs a 5.9m moterised pvc slidding gate. For slidding gate, needs a 6m concrete slab for installing track, needs a small slab for motor, needs a post to connect with power, power is in correct place. Right hand side is 3m long brick wall(existing,no need to do anything) 5.2m needs 1.8m high full privacy PVC fence, 1m gate in the middle.

I need to build Brick fence and landscaping of the front of the house. Need to put sliding gate and small entry gate at the front. - Due date: Flexible

Pickup an aluminium sliding gate 5.4m x1.8m at Seventeen Miles Rocks to Cleveland - Due date: Flexible

Hi, We have a rolling metal gate at front of house. There are a few issues that we would like fixed: 1. The remote has stopped working - battery may have no charge, and may need a replacement. Not sure 2. When the remote stopped working, I started to push and pull the gate manually to operate it. That broke one of the wheels - that is, it came off the main gate. The wheel itself is good, just needs to be fixed back in the gate 3. The gate has metal vertical rods, and has a thin metal sheet riveted into the rods. A lot of rivets have come off, and need to be re-riveted We are in Fig Tree Pocket. Would you be able to fix it? What would be approximate charges? Thanks, Satinder - Due date: Flexible

I’m looking to convert a small external swing gate to a sliding gate. Hoping we can use the existing gate and add mechanisms to it. Open to suggestions - Due date: Flexible

Need a small concrete pad for. 4.8mt sliding gate. No digging require. Can provide a wheel barrow and bags of concrete.

To fix a sliding driveway gate. The gate motor requires alignment and we need to run cable to connect the infrared sensors. - Due date: Flexible

Need a turning sliding gate or a telescopic sliding gate (or a similar plan like foldable gate) for a 6m wide carport which is in an easement driveway and has no enough space for swing gates or normal sliding gate. One of the panels to be used as a pedestrian gate. Price is negotiable. - Due date: Flexible

My sliding gate motor requires alignment and putting 2 bolts as it has moved from its original position. Also I want to wire in the RF sensors.

Supply and install 3.3m elecyric/remote front gate

4.8mt Sliding gate needs to be built using hard wood 70mm slats on an gal frame that I already got made up. Also need to mount small pedestrian gate as well. Happy to show the scoop of work. Will provide all the materials e.g. timber slates, c channel to slide slates in, gate sliding kit, etc…Also need to build about 11mt security fence panels out of timber to cover the patio including some paint work on the weather board on the fence and oiling the hardwood fence at the front. All the pics for scoop of work are provided.

We rEquire 16.5 Meter of PVC fence installed with a small gate and a sliding gate for a single car preferably with the remote opening mechanism and lights on the post.

when remotely closing the gate had a spark in the unit .

Looking for a certified electrician to run cable from meter to electric sliding gate motor and do the connection. Cable to be supplied. There is already a conduit from the meter to the electric motor.

1. Replace existing motor with NICE Robos 500 HS motor 2. Install pair of NICE FT210 wireless photocell safety beams. Please note that existing motor is not a NICE brand

Mate finally I got my insurance claim through. I am ready to get the work done now.

Replacement of existing gate motor

Replacement of old motor with new motor (Nice RB500) and setup. Plus install NICE EPMB Photocells