Find a sockets and switches installation professional in South West Sydney

want to change and relocate old switches for new ones . the whole property.

Wiring in place done by an electrician, but cannot remember name of company. Was coming back to fix socket plates when gyprocking done. Also need smoke alarms replacing.

I have 25 standard wall power outlets that I need replaced with smart wifi ones, I will provide the new ones Similarly I also have 27 light switches that I need to be replaced with smart wifi ones again I will provide the smart wifi light switches Finally, I need you to make 3 new power outlets in the bathrooms behind the led mirrors, for each one there is an existing power outlet about 40 cm away About the location: this is a residential house built about 15 years ago, neutral wires do exist (I understand this is necessary for the new outlets to work) the walls are gyprock About the new outlets: the manufacturer has shared SSA approval certificates to confirm compliance with Australian electrical code, I do notice though that the terminals are all about 1-2 mm smaller than the standard HPM installed currently, I also noticed that they are closer to each other as per the pictures attached to the job. These were purchased locally and have a warranty, I do understand that they won’t work with 2 way lights and that’s fine About you: you must be a certified electrician who is willing to share his credentials and provide an invoice, as this is my residence naturally safety is paramount - I understand of course you can’t give a warranty on the equipment since you will not be providing it

I have shown photos the light bulb socket is broken and does not hold the light bulb in place and in one photo I have shown the wires hanging out need them all fixed

I have a six meter by three meter shed need three lights and three power switches installed - Due date: Needs to be done on Sunday, 20 August 2023

3-4 switches in the power box of a residence to be replaced. - Due date: Flexible

Hi, Please find below the details of installation. 1. I have 5 x "Shelly 1" switches with me that needs to be installed to the existing physical light switches. (1-way configurations). 2. I have a waterproof LED driver, 6 x LED strip lights cut to size & glued to the aluminum profile. However, I would need help in installing it under the step threads & connect it to the existing power source (highlighted in the pictures). Please contact only if you have prior experience working with smart switches. Kind Regards, Ragul - Due date: Before Friday, 21 July 2023

Need to replace 2 electrical sockets in the kitchen - Due date: Needs to be done on Tuesday, 28 February 2023

Two light switches need replacing. x1 in bedroom. Ocassionally jams when switching on/off x1 in bathroom. Has recently stopped flipping. Currently stuck in on position. Tasker will need to supply switches please.

Looking to install 6x new PowerPoints in double storey home. 3x downstairs 3x upstairs Relocate 2x existing light switches (back to back) - Due date: Flexible

Switch board keeps cutting out and it blows ertmything out - Due date: Flexible

Hi I am just doing cost analysis. FTTP going to be installed on 15th July. So I would need couple of wall sockets ( minimum one) to be installed. Meaning, expecting you to run CAT6 cable from router/ modem to another room. This can be installed on 16 or 17 the July. Please let me your costs. Qualified technician would be preferable. Thanks. Have a good day.

Need to move the light switches from door to wall - Due date: Before Tuesday, 28 June 2022

Please read carefully. I want to automate the switches in my house. I need the following; 1. Advice to make sure the Shelly relays will work 2. Advice to make sure the Clipsal Iconic faces can be installed. 3. Install the relays and faceplates in the house. There are about 15 different switches. - Due date: Flexible

I have 6 existing light switches, all need a neutral wire run. I have the replacement switches. (x1) Triple gang with (x1) single gang 3-way. (x3) Double gang (x1) Single gang Apartment building.

I need to remove all my normal switches and install smart switches. Brand doesn’t matter but I prefer Arlec

I require an experienced trades person to please fix or replace my light switches which have come loose or broken from behind? One of the switches has a fan switch too. Can someone please give me a quote?

Got 8 eaves downlight on a double storey house. Wiring to be supplied. Thanks.

The light switch suddenly stopped working. It’s probably faulty and needs replacing. The two wall sockets need to be resecured or replaced.