Find a professional soundproofing service near you

Sound proof walls, ceiling and replace sliding cavity doors with solid doors

I have two barn doors as bedroom doors and would like someone to help soundproof them (to some extent). Image attached for reference along with recommendation from Bunnings

Hi, I’d like to soundproof the partition wall between my house and the neighbour. Total price to be discussed. It’s a townhouse made of hebel. I don’t really hear them talking, but can hear when they walk upstairs or slamming the door, probably structurally/frame bonded. The option im after is decoupling the wall. Installing a new wall on the existing wall with insulation in between. Are you able to provide the quote for 4 walls. 2,4m ceiling, one large wall on ground floor 5m wide. 3 small walls 3.5m wide. I will repaint, reinstall skirtboard, and reinstall the robe if taken off. New wall does not need to be corniced.

Needing 1x ziptie installed on the corners of 80-100 foam soundproofing panels. est 4-6hr job

Soundproofing a wall Approx 8.5m wide and 2.7m high We are looking to install mass loaded vinyl over drywall and then add another layer of drywall Located in box hill

Need to sound proof a door

Elevator too noisy and its near my bedroom.Need to sound proof my bedroom wall and celing from the noise

I currently have a wall between 2 rooms but it’s got a gap where the window is and would love if it can be filled and have the whole wall sounds proofed.

We need to do sound proofing and installation of our new restaurant

Hi, I require 2 office sound proof booths/pods to be disassembled from Manly NSW, transported to Dee Why NSW and reassembled. Picture of pod attached

Very noisy lift so I am trying to soundproof an existing wall that have an air conditioner on

Looking at sound proofing my ceiling in one bedroom

We need 2 doors hung to close off a room as an office. Soundproofing too. No current doors in place so would need jambs?

Sound proofing for consulting room

I need to input a soundproof door between the small kitchenette in my studio and the music studio itself. Measurements of the door frame are; H: 2070 W:708 B:140 [mm approx] Currently there is a lot of ambience coming through the window of the kitchen and also out through the window from the studio - I need to limit this as much as possible. I'm wanting to input a thick "double door" that can close and open to the studio.

Hi everyone, We’re looking for a HANDYMAN who can help us install soundproofing in our unit wall. The TV noise from next door (at normal volume) has been bothering us for a while, so we’re hoping to improve the situation. If anyone has any recommendations or advice, we’d really appreciate it. Thanks so much!

Sound proofing roll to be screwed on wooden fence 5.3x2.4m. You need to bring ladder, screws, drill. Scissors/box cutter. The sound proofing is a soft wrap and comes as rolls 5x1m. Has to be done during business hours.estimate 2 hours

Hi - I have a small study which I would like to put heavy doors on - with soundproofing beading - pics below

Needing to improve soundproofing to home office by replacing existing hollow core door (15kg) with solid core (40kg) and adding some soundproofing to seal airgaps. Have most of the equipment/tools required: DOOR Have a 820mm wide, 40kg, solid core door (Hume 2040 x 820 x 40mm Entrance Door Duracote Vaucluse XV14) that needs to be shaved to fit an 815mm wide metal frame (have Ryobi 18V ONE+HP Brushless 184mm Circular Saw). HINGES Have a range of additional hinges that can be used to install (Lane 100mm Zinc Plated Fixed Pin Durasmooth Butt Hinge - 2 Pack, Pinnacle 100mm Fixed Pin Butt Hinge - 2 Pack and Pinnacle 70mm Fixed Pin Butt Hinge - 2 Pack - wasn't sure which one was best suited) as original door weighs 15kg. PAINT Have white door paint that needs to be added to the door (Paint Partner 2.6 x 3.6m Clear Plastic Drop Sheet, Craftright Folding Saw Horse - 2 Pack, Monarch 75mm Cutting In And Framing Synthetic Paint Brush, UNi-PRO 3L EzyPot Paint Pot, Walpamur Inside 4L White Semi Gloss Interior Paint - 4L, Flexovit 115mm x 1m 240 Grit Painted Surface Sandpaper Roll, UNi-PRO Plastic Hand Held Paint Stirrer). DOOR HARDWARE Would like to reuse existing door hardware, so spindle and barrel holes to be drilled in new door and existing door hardware added. DOOR SEAL Have bottom door seal kit (Raven RP60 Door Bottom Clear 920mm) that needs to be resizes FRAME SEAL Have door frame strip (Raven 5000mm RP59 White Self Adhesive Window and Door Weather Strip) to be installed around sides and top of door frame. GAP SEAL Have acoustic sealant (Selleys 435g Grey Flame Flex Fire And Acoustic Sealant, UNi-PRO Professional No-Drip Heavy Duty Caulking Gun) for any joins/gaps. Things I don’t have: WEDGES To raise door from the ground for when door gets attached to the frame HOLESAW Drill bit for door handle SPADE Drill bit for latch and striker plate CHISEL For latch and striker plate PLANE To shave down door

I wish to soundproof an internal wall. Fixing soundproof boards/acoustic to the wall. I do not want to have to rip off the plaster etc. was thinking about something to add to the wall like boards. I have done one side which has helped - fixed extra boards. But want something better for the other side. Thanks