Find a professional staining service in Sydney Northern Beaches

Repair, Sand, Stain Decking at front of the house

Oil stain the decking. We have the oil and brushes here already. Just need the oil put down, one to two light coats I’d say. Approximately 70 square meters. Must be done after a day of no rain and not when raining. Deck needs to be dry for the oil to be absorbed.

We need 5cm cut off the top (length-wise) of a metal box. (In the attached images, there is a red line indicating the cut) The material to be cut is about 1mm thick. The metal box weighs about 60kg (2 people can lift it), and the size is 192 x 53 x 40cm. It could be cut on-site (if you bring the right equipment); we could put it on a table for you. Alternatively, we can transport it to/from you. After cutting, we can file down any sharp edges; hopefully your work will not be too choppy, but it doesn't have to be 100% neat. We are located in Brookvale.

Onsite stainless steel tack welding and pickle of stainless capping rail. 4 corners with 4 x 20 mm welds on each (16 x 20 mm in total) plus 1 x mitre join weld and polish.

A stainless shelf put up outside on the wooded fence.

Clean and stain pool deck

I need floors sanded and stained. About 80sqm. Flat and easy access.

Rear Deck was cleaned/pressure washed over a month ago, and now need it sealed and/or painted to prevent any damage to it.

Sand and clear-stain both sides of 6 internal flat-pane timber doors

Please see photos. I've sanded once but it needs to be redone. Never actually done this before so looking for someone to come and help me to do it.

Stain undercover timber deck

Small deck needs sanding to remove old stain then re-stained

The deck and connected steps need to be lightly sanded with 3 coates of stain, I will need assistance in choosing the best stain or oil.

Purple shampoo in carpet Not removable with regular cleaning products Need removed About 50c price size and a bit purple around

Looking to have this L lounge sanded down and restained / waterproofed. have the stain but not the sander.

Remove stained timber floating floorboards. I have an extra 4 full length original boards supplied at installation to replace with.

Stain removed and carpet cleaned

I need the railings and fittings of my glass balustrades polished to remove the tarnish. They are stainless steel. I have the solution to do this and it comes of easy as I did another area this weekend. There is 40m left to do. Just the top railing and the four attachments to each glass panel front and back. The AquaViro solution and scourers and drill operated buffer will be provided. It would take probably 6 hours to complete. It took me 3 hours for 20m over the weekend.

Looking for someone to sand back and stain a small dining timber table. Surface and leg. The preference is to have it brought back to original colour (similar to the leg - oak). The surface is too orange. I’d also be happy with the whole surface and leg going darker. Keen to remove the orange look from the surface.

Check for water damage in roof