Find a trusted window repair service in Epping NSW

Cut a round 185 to 190 mm hole in toilet window so I can install a extractor fan. Look at picture

I broke a flyscreen window need a replacement, please offer your cost Thanks

The window shades have fallen and I’d like it fixed

I have an old double hung window where the top pane has slid down and become stuck and at some point possible painted over. From the outside this window is approx 3.5m off the ground (see photo, note that the AC unit is NOT in the way of a ladder). I need someone to get on a ladder and use a putty trowel/knife and a hammer to wedge between the sliding part and the frame and slowly worked their way around the edge. and then use a pry bar or some other instrument to slowly push up/down the window until it unsticks. I have successfully done this for the other stuck windows in the house but I'm not good with heights...

1 insect screen each in 2 bedrooms of the new apartment, need to be installed on the window. Preferably metal mesh. Thanks. Dimensions:- 1. 115*58cms 2. 102*73cms Approximately - Due date: Before Sunday, 26 November 2023

3 large Velux windows with extensive wood rot around the inside frames. Frames may need replacing - Due date: Flexible

the rope was only 13 years young, but shows signs of fatigue. It's not broken yet, but I'd like to get it fixed now. It's a bathroom double hung windows top window. - Due date: Flexible

1. Crack on drawer box door in bathroom. Photo attached. 2.Blind is not moving in bed room. Photo attached. Looking For a quote. Happy to have a in person inspection if needed before final proce negotiations. - Due date: Flexible

Install 12 new windows to replace the existing ones - Due date: Flexible

Aim is to reduce heat and darken the room. Reduce Light & Glare by at least 50% Reduce UV & Heat Cannot be Reflective Cannot be Blackout (3x) 2500 x 1050mm Sliding Glass Doors Must use SUNTEK. - Due date: Flexible

I have had an energy audit done of my house and they recommend installing materials to seal up gaps in doors and windows. Front and laundry door: All of the edges of the front door need sealing with Draft Stripping; this is cheap and easy to install. You should also put on an internal and external weather strip. • Bathroom exhaust vents: The bathroom exhaust vents IXL tactic need a Draftstoppa above each one - http://www.draftstoppa.com.au/ • Other internal doors Please quote on materials. Budget is approximate and you will need to advise actual costs in total - Due date: Flexible

the door is similar to the door shared in the link and i need this kind of fly screen for the window and the door please https://www.facebook.com/reel/850410076162164?s=yWDuG2&fs=e&mibextid=Nif5oz - Due date: Flexible

2 Security screen doors need black replacement flyscreen & 1 kitchen window needs black flyscreen replacement. - Due date: Needs to be done on Monday, 25 July 2022

Have an issue with my window - it won't close properly unless I give it an extra push in the noted spots to tilt the window in order help the latch catch properly. Rollers themselves appear to be fine but I think might have worn down making the window sit lower on the left. The window can be removed but I haven't been able to get the rollers themselves out. Note: I live in an apartment and I cannot replace the frames easily so that wouldn't really by an option - Due date: Flexible

Hi there, Can someone help to replace 1 window flyscreen mesh? I'll provided the new mesh and rubber spline. Cheers, Zhen - Due date: Flexible

Need to replace one small size fly screen mesh in Chatswood today

List of fixes needed: 1. In the bathroom, silicone bath tub, wall/floor joints and corner joints in white, install single towel bar and toilet roll holder. 2. In the ensuite, silicone shower area, wall/floor joints and corner joints in white, install towel ring and toilet roll holder. 3. Remesh 1 window flyscreen. 4. Install 3 blind tensioners. 5. Fix 2 sliding doors with minor sliding problems.