Find professional window and door services in Ashburton

Photo shows an example: Looking for someone to cut a number of thin, shallow, straight slit in certain areas outside of the house (to install a thin 1mm x 1 inch metal strip into the ground). The job requires clean, accurate cuts without widening the slit too much, so the strip can slot right in. You will then need to use Grout for a Thin, Smooth Seal. Materials: ✔ I will provide the metal strip and grout ✔ You will need to bring the cutting tools Slit depth: just slightly over 1 inch (for the metal strip to go into the ground) Floor Areas: 1 x double gate (concrete) 1 x single side gate (concrete) 1x 1 single front gate (brick) 1x double door front (tile) 1 x double door (wood) Areas are cement, brick, inbetween tiles, and wood - all will need this slit Price is indicative

There is an old roller door which was used when there was access via the lane way. We no longer use this access point and as such would like the old roller door cut down at the base (at concrete level) and taken away/disposed or repurposed. The item can be taken through the landway gap in the fence.

Internal Door puncture requiring fixing.

Looking for someone to cut a number of very thin, shallow, straight slit in certain areas outside of the house (to install a thin 1mm metal strip into the ground). The job requires clean, accurate cuts without widening the slit too much, so the strip can slot right in. You will then need to use Sanded Tile Grout for a Thin, Smooth Seal. Materials: ✔ I will provide the metal strip ✔ You will need to bring the cutting tools & sealing material Slit depth: just slightly over 1 inch Areas: 1 double gate foor area, 1 side gate floor area, 1 front gate floor area, 3 x double doors Areas are cement, brick, and wood - all will need this slit Price is indicative

Looking for someone to cut a number of very thin, shallow, straight slit around the outside of the house (to install a thin metal strip into the ground). The job requires clean, accurate cuts without widening the slit too much. You will then need to use Epoxy or Sanded Tile Grout for a Thin, Smooth Seal (i can provide this if needed). Materials: ✔ I will provide the metal strip ✔ You will need to bring the cutting tools & sealing material Slit width: 1mm Slit depth: just slightly over 1 inch Areas: 1 double gate foor area, 1 side gate, 1 front gate, 3 x double doors Areas are cement, brick, and wood - all will need this slit

Need panel beater to fix dent and paint on left passenger door

Needing this door handle installed with someone who has attention to detail and can do things efficiently!

I have an open cabinet and I want someone to make some doors

Paint seems to always peel with weather. I’d like a material to layer over the floor here and also over the outdoor electrical cord to prevent tripping.

The glass mirror has popped out of the seal of my sliding mirrored wardrobe door and it needs to be put back in. There are rivets which join the frame together

Existing door panel is glass, not toughened. I need a hole cut and a dog door installed. I will supply dog door.

I have a passage door needing a new door handle which has been purchased and a sliding fly wire door that was taken off for painting and needs to be replaced

Remove, wrap and the put back on some kitchen cupboard doors and door frames. The existing covering is starting to peel off

Door a doggy door install into a glass door Doggy door need to be big enough for a staffy so I would say a medium to large size door Doggy door needs to be purchased by the installer

Need a medium dog door installed on my double glazed window (80X70cm)

This is an old door to the sunroom which has the rolling parts not working

I need some help to tighten the fixing screws for the cat door (pic 1) and to affix the remaining part of cat run with small bendable metal wires(provided). I suspect the job shouldn’t take more than 20mins.

Garage door was clunking after adjustment. Now springs and cables need setting up, maybe repair.

Hang 1 artificial plant disc in outdoor area. Need 2 screws installed into timber fence and 2 hangers attached to plant (see pics).

The ceiling have bowed and is not allowing the garage door to open. I need it removed in order for me to open it again