Find professional window and door services in Collingwood VIC

Sliding door atrachment, need a pet door insert attached to a sliding door to extend it, and the lock moved onto the extended piece.

Approximate Budget + Materials Need a service window cut into existing corrugated iron fence (approx. 2.5m wide x 660mm high) to create a secure tuck-shop style opening. The existing graffiti-covered iron must be retained intact as the openable flap, cut cleanly and safely. The following is required: • Supply and install full-length piano hinge along the top edge • Add gas struts, soft-open/soft-close lifters or arm supports so flap lifts upward and holds open safely • Fit locking mechanism to secure the flap shut when not in use • Strip and finish all cut iron edges to ensure no sharp or dangerous surfaces • Install simple, strong, non-wobble detachable counter on inside at service height – must lock down from the inside so it can’t be pulled loose or wobbled from the street side (area has high foot traffic and itinerants) • Prefer finished tonight (Fri 4 Apr) or must be 100% complete before 10am Sat 5 Apr – hard deadline Photos show the fence section to work on. Fence is part of the Berlin Brat Haus premises at 286 Smith Street, Collingwood. Power and lighting available on site. Quote must include all materials, labour and hardware. Needs to be clean, functional, and safe with a professional finish. ⸻ Let me know if you also want the final title, budget line, or add-ons like counter surface preference.

The cabinet door under our kitchen sink has broken off at the hinge. We need a new door to be measured, supplied, and installed securely. Open to recommendations on materials and finish to match the existing cabinetry.

I live in a warehouse apartment and have pot plant sitting on the sale of my window which I would like help planted with the type of plant in the photo attached. I would like to see if this could already be grown rather than a seedling.

I have the spare parts from my fridge and I need to change the direction in which my fridge opens. The fridge door opens in the wrong direction and I need it to open in the other direction. I have all the parts necessary but don’t have the know how you’ll need to change the fridge door and freezer door. Looking for someone that has done this before.

Servicing three windows all approximately 1m squared:  1 x Sash window that is a bit clunky to move up and down but it does stay open when opened 2 x Rod style windows (they don't have a cord/sash, they have a rod) that don't stay open when you put them up. We have to use a stick to keep them open.  Just keen to have all three windows moving as expected

We need an opening in a brick wall framed out and door hung. The door will be supplied, all other materials need to be supplied by contractor. See attached drawing for dimensions, and photos of the opening (which is currently boarded up)

Glass shower door is stuck

Replacement of rotten window rails with new treated rails. Sourcing of material on builder.

1200x900mm aluminium sign needs to be mounted above a door for my small business. I’m not super comfortable working at this height and don’t have the equipment to do so. I’ve attached pictures to show the height and my sign. My sign needs to be in the place the COLLINGS sign currently is. The COLLINGS sign has already been removed. Installer must be insured and provide invoice as proof of installation.

Screws have come out of the hinge of the kitchen cupboard door I have the hinge and the screw but need help re attaching them

I need someone to hang a door that was removed. I have the hinges and door but it needs the screws. 226cmx74cm. 7 hinges with 2 screw holes each hinge. 14 screws needed.

lock is jamming, unable to turn Handle is very loose and is sloped New toiler roll holder to be installed

Wardrobe door has been knocked off top rail and is now stuck

Looking for someone handy to help us. We live in an apartment and have a heavy, fire proof door. We had to take it off the hinges to move something into our apartment and since we’ve put it back, the door makes a horrendous creaking sound. We believe the hinges are misaligned, or that it’s creaking on the silicon runner around the door frame (we had to put the hinges over the top of the silicon, previously they were underneath). The door is heavy so might require more than one person, or something to jack the door slightly up with.

Need to shift the strike plate on door frame up about 20mm, including cutting into door frame using a jigsaw, so that strike plate aligns with door latch

Laundry door needs to be re attached to the top two hinges. Shower door to be put back on the top hinge

Top mount fringe doors need to be changed to the other side

repair or replace cut aluminium frame. Replace several aluminium snap on pieces