Find experienced local carpenters in Geelong

As per listing need dining table painted in a hard clear only the top

Have some wooden steps outside that need deconstruction and rebuild with new wood in all or part which ever is easier. See pic

Looking for a carpenter to screw 2 rails on my celiling

I need 2 large solid wood entertainment units to be removed and disposed of from a shed in Norlane. The larger of the 2 is roughly 2m W x 1.5m H x 1m D

Seeking a painter to help stain our wooden doors and windows( two coats)

Replace all the wood except the legs. Wood panels cut into certain measurements.

1. The door closer attached to the security door is improperly secured. The upper bracket appears detached, and the closer is hanging loose. The issue needs to be fixed to ensure the door functions properly. 2. To repair our wooden side gate, which has become loose and damaged at the hinge area.

Missing two kickboards in these two gaps. We have the wood onsite. Needs to be measured, cut and installed Small unit reno in geelong west. Need done asap

Hi, I attempted to clean some dirty foot prints off my light cream/ grey carpet with “Carpet Power” however it made it worse and stained a darker colour. I then tried to get rid of the “Carpet Power” stains with vanish spray which made it a million times worse again. Please see attached images. As it is a rental I really need it back to the way it was. Thanks so much 😊

We are seeking an experienced carpenter to help us transform an existing laundry cupboard into a fridge nook. The job will require some initial demolition, coordinating an electrician to install a socket and then plastering work to make good the original area in the laundry and then the kitchen facing wall. Our home is 1980s brick. Happy to share additional photos and information as required. Ideally have the work finished by early April. This is the first stage of our renovation meaning additional work and opportunities for the right person. Render and aerial plans shows position of new fridge nook. Photo demonstrates current kitchen.

The IKEA shelf is from the Komplement range and the sliding mechanisim is fixed to the side walls of the cabinet. There is a gap between the IKEA sliders and the internal sides of the cabinet. They are custom built cabinets so I am looking for a neat and professional solution to installation.

Framing. Stumps, floor and frame.

To remove corrugated iron sheets and replace with Weatherboards. Tidy up fascia and finish off eave in the corner. Weatherboards to be supplied by owner

Carpenter needed to repair rotting timber double door. Double door has rotten lower section (see photos) and needs a cut and paste or fill repair. Some rotting on door frame bottom and base of side timber frame will need a cleanup, fill, sand and prime. I have paint, primer and filler so just labour required.

We took out the shower and some of the wood is rotten. We just want those bits cut off and replaced with new wood. Just the rotten bits in the red circled area. Small one bed unit in geelong west. Need done asap

Outdoor setting made of solid wood needs sanding and re oiling 1 Table 6 chairs 1 stool

Large square timber coffee table need stripping so I can restrain it.

To build a plastered structure for built in rangehood. Floating shelves to be installed on with side of rangehood. Fix vj board ceiling cladding (replace boards that were removed during renovations)

about 80 m2 of merbau decking to be sanded and restained. I have 10 litres of stain already

We would like a cabinet build like the below photo. Without the overheard cupboard. (We have marked up what we want included in blue crosses) No becnhtop as we will be getting stone put on when we do the kitchen. The laundry is currently empty.