Find experienced local carpenters in North Brisbane

Need door panel fitted to new built in dishwasher. Have removed door panel and kickboard which just needs to be fitted to new dishwasher and kickboard replaced.

Living room plywood and acqoustic panel work

I have ordered a support beam which has arrived approx 5.3m LVL 300x63 needs to be cut to size (current length is around 5.6m) and inserted below the current support beam in the pictures to allow the wall to be removed and room opened up. Beam to be installed permanently. Just needs a couple of posts either side and beam inserted to withhold the horizontal beams above on which the roof sits. Materials supplied just need someone with tools and skills. Happy to also help insert the beam into place. I don’t have any acrow props or jacks but don’t really think this is needed by supporting the middle of the existing beam at the time of installation but welcome suggestions. Plastering commences Wednesday so need everything ready prior. Also have some other small carpenter jobs and happy to pay extra for those as renovation near completion. Based in Chermside not fussed what time of day the job gets done, should not take long at all. If you have someone that can help you all good, otherwise will find some extra spare hands to assist. Insurance or any warranties on the works undertaken not required. The pic with the red arrow shows the current horizontal support beam and the new beam is to be inserted directly under this allowing the studs supporting the current beam to be removed entirely. Thanks in advance.

3 cabinets 900 floor cabinet washer dryer tall cabinet 1050 corner cabinet All floor and have legs already attached and cabinets in place against wall need to be screwed in and stone stuck on top Will have more cabinets later

I have 900 floor cabinet a washing machine and dryer tall tower with cupboards at top and corner cabinet 1050 wide these already have legs attached stone top already cut just needs to be glued. I have more cupboards to be done later when they arrive. Just these 3 at moment

Small deck around the pool area needs to be sanded and stained well, due to recent rains, the stain looks dull and need to prevent moulding, so needed sanding and staining

I had dismantled a timber hard rail in my yard to install a concrete retaining wall. I have the timber fence post fixtures installed in the concrete sleepers so installing timber will be easier and more robust. It’s a Hampton style handrail. The timber handrail needs to be installed I got the timber. Additional timber can be purchased. Total length22m Need to install handrail and paint it white The concrete sleepers at 2.4m wide typically. So to be safe you would need to measure it out again. Best way to look at this project is to set out what material is needed for the handrail. Use much of the existing and then just buy new material from Bunnings as needed. That keeps the project nice and simple.

Need kitchen cabinets adjusted so I can fit dishwasher in the kitchen

I need my deck panels trimmed back about 2 inches in order to slide a spa panel out. Hopefully this could be achieved by cutting straight into the wood, but I may have to consider taking up and replacing the planks around the spa entry.

Replace 3 timber slats on house, timber privacy screen@ carport Stafford Heights, Queensland - Replace 3 timber slats on house. Labour plus materials cost - Do timber privacy screen on one side of existing carport using current structure approx 5m x .9m. Labour. cost. I will be on site to help. Potentially other work to discuss separately. Happy for site visit to quote.

Change pantry doors and amend heig

Hoping a cabinet maker who has a couple of offcuts of cabinetry materials, can make a small ‘L shape’ cover for under a bathroom vanity (to cover an old exposed pipe). The cabinet/cover needs to be white please, and preferably gloss. The measurements are 26cm x 26cm x 46cm high. Delivery not necessary - I am happy to pick up once complete.

I need this entertainment cabinet which is built into the kitchen cabinetry removed. It is attached to the floor, the pantry and the wall. The space does not have to be restored (this will be fixed at a later date) but I need minimal damage. There is one existing pane at the bottom which is shared with the panty, this piece can remain in tact (will fix later) No need for disposal there are bins onsite. Open to negotiating price.

Build a wooden console table. Looking for this exact style but with these measurements: Height: 75cm Depth: 30cm Width: 80cm

Looking for someone can replace my broken cabinet door. Opening dimension is 960mm by 2100mm. I am flexible on the easiest way to fix it, either glass door or wooden door.

We’ve got the wood and hinges to replace the wooden lid that covers our pool pump housing. Looking for someone to come round, cut the wood to size, and install it with the hinges onto the pool pump housing.

Door and window installation, trim fitting including baseboards and crown moulding. Plus, framing and sheeting a recess for a built-in fridge. It's a big job so per hour pay offered in cash

Pool deck needs a light sand and stain 3m x 6m . New garden bed needs a stain approx 7m long

I'm looking for a skilled carpenter to build two breakfast nooks in my home. The design is simple and modern, and I have measurements and ideas ready to discuss. I will pay for the materials.

I have built a home gym lifting platform and bought a commercial quality weight rack. I would like someone to secure the rack to the platform with fixings I’ve bought. Need an impact driver and I don’t have one. There’s 4 posts to be fixed with 3 screws in each, m10x50mm. Sitting on 18mm ply and 2 sheets of 12mm structa panel