Find experienced local fencing contractors in Brisbane

I need a replacement chain wire and timber fence. 15 metres long and approx 1.5 metres high.

Regular fence maintenance (around monthly) to refix wood palings, check on fence posts and rails for possible repair or replacement, in 17-unit garden complex. Other jobs may come up.

Replace the existing front gate. Needs a new metal frame and timber palings. Size: 1.23mt wide x 1.660mt H (at highest point as the gate has a camber)

Segment of wooden backyard fence leaning back significantly. Needs repair to hold up fence a prevent falling back all the way, ? a new post to reinforce the part that is leaning back and rectify. Need completed in next week or so.

Hello, I was hoping to get someone to build a timber fence to seperate my front and backyard? I cannot find the measurements of the area and I am not moving until January (currently in Victoria).

Post holding sliding gate has been pushed and this has caused the bolts to be uplifted slightly (post is now on slight lean) Need bolts removed, apply concrete glue, then install new dynabolts so post is vertical so gate slides smoothly. You supply dynabolts and concrete glue

Need a spring replaced on a glass pool fence

Wire trellis installation on back timber fence

Replace a Broken Pool Fence in Bulimba. The dimensions are: 200 x 1000 x 10mm clear toughened safety glass. I would require you to: 1) Go to property to assess and measure what materials are required. I believe that the hardware is still intact. 2) Pick up from Bunnings the required materials (I think that this is correct size): https://www.bunnings.com.au/protectoral-1000-x-1200-x-8mm-glass-pool-gate_p0389557 3) Install the pool gate. I have budgeted $450 for your time and labour, and will reimburse you for the cost of materials from Bunnings.

We have three panels of fencing in the backyard that I think are abestos. One side has been sealed/painted. It's falling apart and away from the fence posts and I'd like it safely removed. Think it's under the 10sqm limit but would still need to be wrapped in thick plastic, etc. and want done properly. Tried to show in pictures but can take more if required. If you could also take away the rotted wooden posts and the standalone metal sheet, that'd be great too (don't think that one is abestos).

Glass panel has slipped out of bracket of Pool fence Tried handyman’s to no avail Example of how it should be in photos of one next to it We think it needs to be lifted and back into the bracket No breaks just slipped

Need to replace wooden boards on deck and re concrete fence post

Automated gate opener's screws keep coming off the gate, leaving holes on the gate. Needs to be fixed and than put the gate opener back on gate.

We have glass pool fencing supported by powder coated posts on a wooden deck. Job 1 - a glass panel has shifted away from one of the posts, causing the gate to sag. The glass needs to be removed, panel replumbed to be vertical and glass reinstalled / glued etc. Job 2 - There is also a second gate that’s not closing well. The gate hits the latch. My guess is easier repair than job 1. Job 3 - one other panel is coming away from a post. More minor fix than job 1. Photos in order of jobs above. Need contractor with demonstrated experience in similar repair jobs for pool fences, ideally glass panels.

I estimate this is one to one and a half days work. The fence was damaged by some palms that were leaning up against it. The front section needsnto be knocked down and rebuilt from the footing to full height. The fence is apx 5ft high × 4m long. There is a return on the wall which is in good condition. The repair needs to integrate into the existing corner. The footing looks OK but needs to be verified. Section of fence ends in a pier for a gate. Happy to negotiate in price - will need a visit to quote. Price includes materials.

Hello. We’d like to build a privacy screen across the pool filter as shown in photos. The screen will be made of treated pine (2.1m lengths) and to be at the same height as existing fence. Concreted posts in and palings on rails. Please include time and materials.

Wanting someone to dig out a trench to then pour concrete into it suitable for a pool fence to be built on top of (which I’ll do). Slab would need to be 6.3m long and 20cm wide. Depth would just need to be deep enough to be suitable for a glass pool fence to be installed on(approx 20cm), possibly with some reinforcement in it if needed. Finished concrete would need to be level and the same height as the grass either side and nice and flat on top suitable for tiles to be laid onto it. Ground is relatively flat at the moment.

We have an existing fence down one side of our house but the palings are on the neighbours side. We want new palings on our side. So we need to get railings and new palings installed on our side. The fence will require two different heights due to the small concrete retaining wall down part of the fence line. 1.8m = roughly 8-9metres 2.4m = roughly 7.2metres We can buy everything and have it delivered to the house if you can provide a list.

We need our front fence painted. The fence has 80% of first coat done. I want 2 more coats with enough time between to dry completely (do over a couple of days maybe?) I don't want the stainless latch painted at all but the hinges can be as was done on 1st coat. I expect a good and detailed job, making sure you get into every corner and joint properly, including in and around the metal gate frame. I will provide paint. You to need to provide tools/brush etc. You will need to wipe down and clean all the dirt off the fence first. A sheet or cardboard will need to be used to not spill onto the concrete. There is no grass in yet and just dirt, so use a sheet or something at the bottom to stop dirt being dragged in. I expect you to do under the bottom rail properly and all the way down the rails to ground.

Complete an approx 18 meter wooden fence on side of property and gate. Level off top, complete last panel and complete fence where wood required as can see through to neighbours. Make sure gate closes. Provide all materials and tools.