Find experienced local fencing contractors in Melbourne

We need a fence replaced. Currently have an old timber fence that is falling down Fence to be roughly 5.4m LONG and 2m HIGH. Side access door will need to be build into the fence See photos to see what is being replaced.

Quote for replacement of rear fence to treated pine paling fence (as per completed example pictured) inc. posts, baseboards. Approx. height of 2.1/2.25m (i.e. level to adjoining green fence) and 900cm across. Measurements and photos attached (rear only). Easy access from all sides.

fence and fence lattice have fallen

Part of the wooden fence is falling off. Needs to nail back. Dont know how much it cost. Please quote in PM

We need a standard paling fence demolished, removed and replaced with a new paling fence in a courtyard. New fence will be 5.7m wide and approximately 2m tall. You will need to provide all labour and materials, including tip fees for removal. You will have access to the driveway for your vehicle but access to the courtyard will be through the house.

-Fence repair in backyard. Fence is approx 5.8m long. Posts are most likely rotten but the actual fence is in good condition.

Repair existing metal gate - new post to be concreted in and new lock to be aligned

Hello, I need a sliding gate, posts and 4 fence panels removed and disposed from site today - gate is 3.6m long I'm here now and can help load if required Also a little bit of other mixed rubbish as per photo

7 rolls of 20m Cable tie from eyelets onto temporary fencing Needed today for an expo

We need: - an in-ground clothesline cut from concrete (no disposal required); - a new fold-down clothesline installed in the wooden fence (we have the materials); - a pull-up bar installed in a brick wall (we have the materials).

Due to recent strong winds the rear timber fence has become unstable and leans into the rear laneway. The timber paling is still intact but stumps are loose and gate is detached. The fence + gate is roughly 5 metres long. Required: Stabilise the fence and reconnect gate

We have a rotten old fence which has needed replacing, however we covered it with a screen. Last night a large tree fell and landed on the fence causing further damage that needs urgent fixing. The auction for our apartment is tomorrow night and we are desperate!

We have a gate that we want replaced with a taller picket gate with lock on the existing frame. Approx 1.8m. The gate width is 73cm. Need someone to supply and install.

The back fence of our backyard had to be taken down while building the granny flat. Now that the building process is complete, I’m after someone to fix the missing portion of the fence (currently blocked with temporary fencing). The dimensions roughly are 2.6m length and 2.2m height). We don’t have the materials for the job, but there’s a Bunnings nearby.

My fence is leaning into a public lane so it needs urgent repair. The fence is about 14m. Inside the fence is a concrete wall. Please let me know if you can repair the fence. Thanks!

Remove existing side gate and current timber it is attached to on the walls. Install new timber gate and new timber post to attach to wall. Gate provided, timber provided. Will need to provide required screws and any bolts Dispose old gate and timber.

I need someone to supply and place 2.0 meters of Ocean blue colour bond fencing. Site will be prepared. Posts and CB fencing will need to be supplied and installed with associated attachments. It’s only 2.0 meters to join a new roller.

We need our glass pool gate repaired as the latch doesn’t close and the glass fence needs to be straightened

I need a boiler maker/welder with experience in metal fencing to install 2 fence panels and a pedestrian gate at the front of the house. Work includes some welding, bracket fixation into metal with screws and metal that needs to be cut/trimmed. 1. Pedestrian gate – 2 sets of hinges to be screwed into the metal post (picture 1). Strike bar to be screwed into the opposite metal post with one part of the metal that requires trimming and a hole created for the gate latch bolt (picture 2). 2. Fence panels (2 panels) to be installed. The fence panel brackets will need to be screwed into the posts (4 brackets). The fence panels are slight wider and require trimming of the overhangs (horizontal bars) prior to attaching to the fence panel brackets. Both panels are attached to the larger post on each side. The other side of these panels are to be joined to the intermediate (smaller) post in the middle. This will require welding (picture 3). 3. The skirting of the posts (3 sets) will need to be welded on the foot of each post (please see picture). There is rear access for parking. There is no parking at the front of the house. Preferable this Saturday (04/05/24) or Sunday (05/05/2024).

We would like to get help building a 3x5x1.2m fence + swing gate around a new hot tub that we are getting delivered tomorrow. We have lots of wood already on hand from fences and decking that we removed a few months ago. We would love to also build a frame above the fence to trellis vines, but that's optional.