Find a professional Kaboodle kitchen contractor in Melbourne

Requiring the assembly of Kaboodle kitchen, pantry and fridge cavity, two door tall cabinet and small laundry in newly renovated areas (no demolition required). For the laundry, also requiring the installation of wooden benchtops, including cut out for the sink (benchtops and sink supplied). Areas fully prepped for fit out and all materials supplied. Kaboodle kitchen design plans have been drawn up (via in-house consultation) so should be an easy assemble. Design plans will be provided to installer.

Install new laundry cupboards and bench top- Kaboodle. Walls are double brick. Also looking for a plumber- any contacts?

See plans and design attached

I will have all supplies but you may need a drill 1. Installing Kaboodle Kickboards What you’ll need: • Kickboards • Tape measure • Pencil • Saw (e.g., handsaw or circular saw) • Sandpaper • Screws or adhesive • Screwdriver or drill • Clips (if provided) Steps: 1. Measure and Cut: • Measure the length of the space beneath the cabinets. • Mark the measurements on the kickboard with a pencil. • Cut the kickboard to size using a saw. Smooth rough edges with sandpaper. 2. Position the Kickboard: • Align the kickboard under the cabinet carcasses (ensure it covers the gap between the floor and cabinet base). 3. Secure the Kickboard: • If your cabinets have pre-installed clips or brackets, attach the kickboard to them. • Alternatively, use screws or adhesive to secure the kickboard to the base of the cabinets. 4. Adjust for Uneven Floors: • If the floor is uneven, scribe the bottom edge of the kick

Install (Bunnings) Kaboodle kitchen - everything will already be assembled. Plans (including elevations) available. Need to have experience with cabinetry work. We need an installer in our team and this may lead to more jobs.

I have 3 kaboodle kitchen 3 draws made up for an island bench. Have bought the draw fronts which need to be put on and a laminate bench top from Bunnings ordered and put on as well as the side and back panels.

I need a professional joinery installer who is competent fitting Kaboodle kitchens, and you must be a clean and reliable operator. I will require pics of completed works you’ve done previously. This task needs to be completed asap. The job is ready to go now. I’m a builder who specializes in residential fitouts. Ongoing work is available if you’re good at your job. As per the attached plans, there are 11 cabinets to assemble and install, plus 6 drawers, laminate benchtop & acrylic splashback. Refer scope of works attached. I have a budget of $3k for this task. Don’t bother sending me higher offers.

Would like a kaboodle kitchen installed in an apartment. The kitchen is u-shaped and 2200mm x 2350mm approx. All materials will be onsite ready to start. Looking for a start date around 1st of October. Plans attached.

I have two handy man jobs to be completed: 1. Assembling and installling a kaboodle pull out pantry (the pantry is existing but we need the shelves installed and the door removed and reattached) 2. Replacing the chain in our balcony blind. Pics attached.

I need a microwave cube (Kaboodle from Bunnings) hung on a wall. Power point is already in place.

Attach door handles to 5 x kitchen doors (kaboodle) and rehang. I have doors, hooks and handles. Straight one other kitchen door not hanging straight. St Kilda, Eildon rd, grey street end.

Simple cabinet joinery of Kaboodle Kitchen. Cabinets only. No benchtops.

Will be installing a Kaboodle kitchen in Melbourne cbd. It is a u shaped kitchen 2.3m x 2.3m x 2.57m. Everything will be onsite in packaging, ready to unpack and install.

Required works include: Assembly of all carcass Modifying pantry cabinet to fit Installing bulkhead Install kicker face Benchtop will be installed separately and plumber and electrician have been acquired separately too

Remove old kitchen and install new kaboodle kit kitchen. I had a bunnings in house appointment. Due in 6 weeks, approximately 28th May. Planning to get installed around 28th of May when kit is ready from Bunnings. No changes required for plumbing and power points. Will keep current freestanding appliances in current location. Need an estimate to remove old kitchen and install new kaboodle kit one?? I will provide a skip bin for disposal of waste. Located in Elwood. Installation date is dependent on when Kaboodle kit is available from Bunnings.

We had Kaboodle cabinetry installed and one of the doors needs to be shaved down and the hinges fixed/replaced. Need someone that can undertake the work and attend Bunnings to obtain any hinges they may need

Will email in-home bunnings packet with details for those interested in this job

We have two corner cabinets (kaboodle) brand which have both come off their hinges. One side has fallen off and the hinges are fine. The other side the hinges are bent and likely need replacing.

Thought I could install myself but a smaller under cabinet unit proved me wrong. Would like this unit installed and fitted. May require general cabinetry maintenance to adjust doors, etc. nothing else major required - Due date: Flexible

I need a experienced kitchen installer. A multi tasker to help remove a existing kitchen and install a new kaboodle kitchen. Probably a week's work. I need a reliable and good time keeper to fit it in quickly but properly. I will be your assistant. I have all the plans and have a delivery date of around March 4th. It's a small kitchen although quite compact and similar to my existing one. Please can you show me some examples of your previous work and we can go from there. All appliances except the microwave and fridge will be new. I have attached one photo of the existing kitchen and the plans/design of the new one. Due date: Needs to be done on Monday, 4 March 2024