Learn how to install weather stripping on windows with our guide

While the winter months can be fun with building snowmen or having snow fights, it’s not so fun anymore when your home feels way too cold! This is why it’s important to weatherproof your home. One simple and cost-effective way to do this is by weather-stripping windows. This entails attaching a material to seal off air leaks from your windows.

In our guide, learn tips on installing weather strips and what materials to check out. Read on!

9 Types of window weather stripping materials

Before you choose a material for weather-stripping windows, determine the type of window you plan to seal. The material should be compatible with your window to effectively withstand temperature changes, friction, and wear and tear associated with your location and the weather.

1. Tension seal

Also known as a V-channel, this is a self-stick vinyl folded along the length in a V-Shape to bridge a gap. The material’s shape creates the seal by pressing against the sides of a crack to block air from coming in. It’s best used for sliding window weather stripping.

2. Felt tape

This is plain or reinforced with a flexible metal strip and is usually sold in rolls. It has to be stapled, glued, or tacked on. The staples must be parallel to the length of the strip to ensure a seal. This affordable material is best used around a window sash with reinforced felt.

3. Door sweep

Door sweeps are flat pieces made of aluminium or stainless steel. It’s also fitted with a strip of plastic, vinyl, sponge, or felt to fill the space between the door and threshold. This is best installed on the bottom of the interior side of a window. It’s one of the easiest to install and is very common in hardware stores.

4. Reinforced foam

Closed-cell foam is attached to wood or metal strips to prevent drafts from coming in. It’s a relatively affordable material used on window stops and the top and bottom of a window sash. 

5. Tape

Usually made from nonporous, closed-cell foam, open-cell foam, or EPDM (ethylene propylene diene monomer) rubber. This is best installed on the top and bottom of a window sash, attic hatches, and broken windows. It’s also good for blocking corners and irregular cracks.

6. Rolled or reinforced vinyl

This is made from a flexible or rigid strip gasket usually attached to wood or metal strips. It’s best for window stops or the top or bottom of a window sash. Rolled or reinforced vinyl allows more options, strength, and durability when weatherstripping. It can also provide an aesthetically pleasing look because of its rigid form.

7. Magnetic

This is a very effective air sealer that works similarly to refrigerator gaskets. The magnetic strip is encased in a UV-stable TPE (thermoplastic Elastomer) cover that can be trimmed in the field to fit into corners. Magnetic weather stripping is best installed on double-hung and sliding window channels.

8. Reinforced silicone

Reinforced silicone is made with a tubular gasket attached to a metal strip that resembles reinforced tubular vinyl. This type of weather stripping is placed on the bottom and sides of a window or window stops. Because of its slightly more pliable feature, it tends to form a better seal than reinforced vinyl but comes at a higher cost.

9. Fin seal

This is made from a pile weather strip with plastic Mylar fin centred in a pile. Fin seals are made of plastic and can last for several years. However, they are often hard to replace after the first installation. This is best installed on aluminium sliding windows.

How to install weather stripping on windows

You’ll need to measure the perimeters of all windows to be weather-stripped to find out how much weather-stripping material you’ll need. It’s a good idea to add about 5 to 10% to the total material measured to accommodate errors.

Installing weather stripping supplies will range from simple to technical. Read the instructions found on the weather stripping package to ensure a successful application.

What you’ll need

• Your chosen weather-stripping material

• Tape measure

• Scissors or tin snips

• Caulk gun and caulk

• Hammer

• Drill

• Brads

• Rags

Steps to weather strip windows

Step 1: Clean the window

Open the window and clean the outside of the sash or stop with soapy water. Make sure that no dirt or grease remains. Remove old weather stripping and adhesives to ensure the new weather stripping material will stick on properly. 

The old weather stripping should pull off. You can use an adhesive remover with a rag and scrub it off for the remaining adhesive. Follow manufacturer instructions to ensure the product won’t damage wood or other areas. Allow the area to dry completely. 

Step 2: Cut to size

Measure out the weather stripping material of choice and cut to size using scissors or tin snips, depending on the material used. Exercise proper safety precautions and wear safety gear when handling power tools like drills! Here are some of the most commonly-used weather stripping materials and how to measure them to size:

• Tension seal

Position the strips, so the flared flange faces outside. Mount the centre strip to the upper window sash with the flare placed down. In contrast, horizontal strips are mounted to the top of the upper sash and the bottom of the lower sash, flare facing out. Using scissors or tin snips, cut the v-strips to size.

• Vinyl

After cleaning and drying the area, cut the rolled vinyl to size with scissors.

• Tape

After ensuring the surface is clean and dry, measure the tape on all sides of the window stop. Then, cut it with scissors or tin snips.

• Door sweep

Measure the width, then mark and cut the new door sweep to length. Drill pilot holes onto the door sweep, and loosely attach it with screws. 

Step 3: Apply weather stripping material of choice

Once measured, ensure that the surface you’re applying to is clean and dry. Here are some of the commonly-used weather stripping materials and what to keep in mind when using them:

• Adhesive-type weather stripping like foam or vinyl will have an adhesive backing. Remove this as you go to help prevent the adhesive from accidentally adhering to an area that it shouldn’t. Press firmly in place

• Nail-in weather stripping, like door sweeps and tension seals, will entail placing nails in pre-punched holes. For double-hung windows, install the lower half, drop the sash, and then install the upper half.

Installation tips

• Some peel-and-stick weather stripping should only be applied when the temperature is around 50°F (10°C). Check the product label to be sure.

• Start with a tiny area to ensure the window opens and closes without difficulty.

• Measure twice before cutting to prevent waste!

Got weather stripping needs? Find a pro!

Weather stripping can help you save on costs by reducing air leaks in the warmer months and preventing cold draughts in the colder season. If you feel daunted with doing the task or have no time to do it yourself, why not find a reliable handyman?

Post a task on Airtasker and find pros to weather strip windows.