Built In Wardrobe Jobs in East London

Browse through over 500 Built In Wardrobe Jobs.

See what you could earn

£0

per month

Based on average built in wardrobe task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Built In Wardrobe tasks in East London

Check out what tasks people want done near you right now...

We're seeking a professional 3D CAD designer proficient in SolidWorks to produce detailed Water Control System designs from concept sketches and ideas. The initial task will be to design a Water Level Monitoring (WLM) system with the supplied information and image. Ongoing work may be available based on the quality and promptitude of the design. Please note that the design must be in SolidWorks, and the initial task should only be completed if you are available for ongoing work. The WLM system consists of a main pole (assume 50x4mm tube) which is fixed to the ground and supports the stilling tube, electrical cabinet (300x300x150mm, centre 1.6m from ground), and solar panel (397x280x25mm, 2m from ground with latitude and direction adjustment). The stilling tube extends to the bottom of the canal and must be large enough to house the 27mm diameter sensor and have an adjustable angle to suit the canal. The solar panel and sensor cables must have minimal exposure and remain inside the pole and tube as much as possible before entering the cabinet. All components are to be aluminium. Please develop a 3D model of the entire system, except for the electrical components. Include simplified models of the solar panel and cabinet as references. Detail electrical cable provisions. This task has a limited budget, as we are interested in what can be produced in a restricted timeframe.

Sat Apr 19 2025

26 minutes ago

Open

Sat Apr 19 2025

29 minutes ago

Open

Good afternoon, We are having our ensuite built and know what kind of vanity we are after visually, but nowhere seems to sell anything remotely like it. So we are looking into having one built. Are you able to quote us on the costs of having something like this built? I have attached photos below. We are after standard ensuite size (width is approx 900-1000mm) Marble (or marble-look) bench top with an under-mount sink Tap wear fixed to the wall not the bench top Freestanding Dark wood classic/traditional finish Unfortunately everything available is either floating or highly modern/contemporary, which we are trying to avoid. Please let me know if you can assist!

Fri Apr 18 2025

about 16 hours ago

Open

I have a 2017 Honda HR-V in need of a transmission service and oil + oil filter. need supply of genuine honda oil for the transmission and for the the oil filter too. May I get a quote for this work? Thank u!

Eastwood, New South Wales

Fri Apr 18 2025

about 16 hours ago

Open

We would like concept plans and ideas for an extension to an existing 1900’s built house. We only require 2D concept plans, not full construction plans. The front of the house currently has 3 bedrooms and a living room. The back of the house has kitchen, laundry and bathroom. The back part of the house needs to be knocked down, creating an extension building envelope (STCA). The envelope shown on the attached site plan is an approximation, it can extend on either side of the house or be level with the house. A verandah may be built on the right (shed) side of the house allowing a door from the extension onto the new verandah. If needed the extension can be larger (or smaller) than the envelope shown. We have a couple of alternatives we want to see drawn up. 1. A double storey extension out the back comprising kitchen, living room, bathroom and laundry downstairs (possibly converting bed 2 into bathroom and laundry?), and a master suite upstairs. We would like a balcony on the north (top right on the site plan) upstairs to take advantage of the view. 2. A single storey extension with kitchen, living, laundry and bathroom and a new master suite with ensuite (using either Bed 2 or Lounge – Bed 3 can be used as a lounge). I have attached a floor plan of another house we have seen that has had a similar extension however we want a separate laundry room, not a European laundry in the WIP. We want to maximise light in the living area, happy for the kitchen to be on the S/W wall. The site plans as shown are close to scale but can not be relied on for measurements.

Fri Apr 18 2025

about 17 hours ago

Open

Carport wall - exposed at the back - birds are living in them!! Would love for them to be covered.. Estimated 276x162cm

Reservoir VIC 3073, Australia

Fri Apr 18 2025

about 17 hours ago

Open

The task: Generate a SDL filed for the part below and 3d print 20 of the parts -------- I can post a real part for measuring. The pictures below are of a small clip about 1cm by 2cm that is used to hold the dome of a oyster style light to its base. Each light uses 3 such clips. (When used the clips are held in place with a screw. The problem is that over the last 15 years the tab part of the plastic clip has become brittle (due to heat from the light) and now breaks off when the lamp is changed,

Fri Apr 18 2025

about 19 hours ago

Open

Looking for quotes for someone to make a floor bed with high rails for my toddler Dimensions would need to fit a standard single mattress, 92 W x 190 L, and rails 80 cms high, with 7cm gaps in between. Please see pictures. Would love a quote with gate and also without, just a full piece. Wood would need to be safe for a baby/toddler if they were to chew on it a little Location Leppington Sydney 2179

Fri Apr 18 2025

about 21 hours ago

Open

Looking for a handy man. Need to sand and paint the caravan outside. Located in Officr 3809 but happy to drop your place of you prefer that.

Dandenong North VIC 3175, Australia

Fri Apr 18 2025

about 23 hours ago

Open

Browse all tasks

Last updated on 19th Apr 2025

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

We've got you covered

Whether you’re a posting a task or completing a task, you can do both with the peace of mind that Airtasker is there to support.

Airtasker’s insurance cover