Dishwasher Not Draining Jobs in London

Browse through over 500 Dishwasher Not Draining Jobs.

See what you could earn

£0

per month

Based on average dishwasher not draining task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Dishwasher Not Draining tasks in London

Check out what tasks people want done near you right now...

Bulb fitting for lamp has come apart and exposed the wiring. Not sure how to re-wire the lamp to make it work again.

Tue Apr 22 2025

about 8 hours ago

Open

Hi, We need to make 12x custom chairs for a church. We have mocked up what it would look like (essentially trying to recreate a similar design to this chair) - Pic 1, without the back (so it looks like Pic 2) Pic 1 reference image and video https://www.youtube.com/watch?si=MXLrA9-LPp2TD1zc&v=1-JJJ8ozqE8&feature=youtu.be Pic 2 without back Required Specs 45 cm depth / front to back 75 cm length / from side to side 65 cm height / from floor to sit Wood thickness 7cm Finish - The finish can be raw wood (sanded and smooth) but does not need varnish or paint (will be painted by the church). Needs to be treated pine or similar / non-toxic if left indoors for a while while painted over several months. Delivery - Please quote for delivery to Sydney North shore area, or pickup from your factory Thanks!

Tue Apr 22 2025

about 9 hours ago

Open

My Toro 48inch ride on has electrical issues. I recently replaced the battery, relay switch and relay fuse. The original fuse had blown and now the new fuse has blown. I have purchased another relay switch and that has not corrected the starter on this occasion. Does anyone work from home on commercial ride ons so I can avoid the mower centres.

Mon Apr 21 2025

about 12 hours ago

Open

The surface of the bookcase needs repair. It's likely to be veneer, not solid timber, which means there's only so far you can sand before it goes through the veneer & ruins the finish. So restoration might involve very careful stripping the exterior back, prepping & sanding, sealing & polishing.

Sun Apr 20 2025

1 day ago

Open

Install a dog door into a glass panel. Panel of glass is 59cm high by 52 cm wide. Have got an aluminium frame dog door from Hakuna pets that is about 30x24cm. Unsure whether this can be used or not

Hornsby, New South Wales

Fri Apr 18 2025

4 days ago

Open

Good afternoon, We are having our ensuite built and know what kind of vanity we are after visually, but nowhere seems to sell anything remotely like it. So we are looking into having one built. Are you able to quote us on the costs of having something like this built? I have attached photos below. We are after standard ensuite size (width is approx 900-1000mm) Marble (or marble-look) bench top with an under-mount sink Tap wear fixed to the wall not the bench top Freestanding Dark wood classic/traditional finish Unfortunately everything available is either floating or highly modern/contemporary, which we are trying to avoid. Please let me know if you can assist!

Fri Apr 18 2025

4 days ago

Open

We would like concept plans and ideas for an extension to an existing 1900’s built house. We only require 2D concept plans, not full construction plans. The front of the house currently has 3 bedrooms and a living room. The back of the house has kitchen, laundry and bathroom. The back part of the house needs to be knocked down, creating an extension building envelope (STCA). The envelope shown on the attached site plan is an approximation, it can extend on either side of the house or be level with the house. A verandah may be built on the right (shed) side of the house allowing a door from the extension onto the new verandah. If needed the extension can be larger (or smaller) than the envelope shown. We have a couple of alternatives we want to see drawn up. 1. A double storey extension out the back comprising kitchen, living room, bathroom and laundry downstairs (possibly converting bed 2 into bathroom and laundry?), and a master suite upstairs. We would like a balcony on the north (top right on the site plan) upstairs to take advantage of the view. 2. A single storey extension with kitchen, living, laundry and bathroom and a new master suite with ensuite (using either Bed 2 or Lounge – Bed 3 can be used as a lounge). I have attached a floor plan of another house we have seen that has had a similar extension however we want a separate laundry room, not a European laundry in the WIP. We want to maximise light in the living area, happy for the kitchen to be on the S/W wall. The site plans as shown are close to scale but can not be relied on for measurements.

Fri Apr 18 2025

4 days ago

Open

Fish pond people. Please provide basic costs involved e.g labour/ hourly rates. Need assistance digging and creating a new pond area so i can relocate existing koi fish in my backyard. Will need to purchase new equipment as we go along as I'm not certain of components required 👍existing is approx 2x2 meters but i would like to create a more natural setting...lagoon type/ billabong. Thank you 😊 have a GR8 weekend

Thu Apr 17 2025

5 days ago

Open

I am looking for someone who is very familiar with glassing techniques used in making surfboards with epoxy resin. I am an artist and need panels - rectangular pieces of EPS foam ( as large as 2m x 1.5m) glassed and sanded to a Matt finish - same as surfboards. I will supply all materials but happy to discuss further if any changes needed. I have been doing this myself for some years and there are some issues that come up - such as folding edges etc but I have worked around this and will explain how. Other than that it is very straightforward as they are just large flat surfaces. Adjustments will be needed as obviously regular glassing stands and set up probably won’t take the size of the panels so will need a different surface. I can have/can make a set up to do all the work at my place however I am in the southern highlands NSW so am assuming it will be easier ( and my preference) to bring the panels to wherever you are - probably coastal? Am open to travelling a fair way - Newcastle is about 3 hours from here - happy to go this far or a bit beyond and the same distance south from the Southern Highlands of that helps. I have taught myself to do this but don’t have the time to dedicate to this and it’s also not my specialty so know I won’t/dont get as good a result as someone who is well practiced etc! Happy to discuss prices etc. I’m looking at needing around approx 4 - 7 panels to start with in varying sizes but will be ongoing job if we are both happy with it. I won’t have the panels ready for 3-4 weeks approx.

Sydney NSW, Australia

Mon Apr 14 2025

8 days ago

Open

Browse all tasks

Last updated on 22nd Apr 2025

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

We've got you covered

Whether you’re a posting a task or completing a task, you can do both with the peace of mind that Airtasker is there to support.

Airtasker’s insurance cover