Find an experienced concreter in London

Block paving repair approx 1.2mtrs sq as it has sunk due to soakaway below

Break down the existing raised concrete, and lay slabs there and on the grassy area with some kind of edeg to keep the English Ivy.

Break up and remove 10-20cm thick concrete border of patio, for a flowerbed. 1.8m x 0.5m and 1.9m x 0.5m. I’ve marked out the area to clear with a 230mm angle grinder. Needs a breaker.

we have a slab of concrete which we need to be broken up using a jack hammer. we will dispose of the concrete. You must have a jackhammer

I need a small strip of gravel removed and taken off site and replace with some new gravel. Job should take no more than an hour

We have a large walkway (about 7sqm) that is cemented, but it has a few bumps and holes. I am looking to see if I could get someone to apply a thin layer of new cement to even it out. Ideally, I would like it to be stamped concrete but the budget is limited.

EXISTING CONCRETE GARDEN PATIO PAD NEEDS LEVELING AND POLISHING. MAYBE AN ADDITIONAL LAYER / SCREED ON TOP WITH A COLOUR AND FINISH IF POSSIBLE. APPROXIMATELY 40 -45 SQUARE METRES. PLEASE SUBMIT PICTURES OF MULTIPLE PROJECTS OF A SIMILAR NATURE WHEN REPLYING. THANKS

I would like to put down paving slab in my front porch. I will remove the stones and decorations before this.

Hi Niall, as per before , thanks for your message re breaker !🙂🙏🏼

I have a pond (not too large) which needs to be emptied and filled with gravel and soil

I need someone to lay an extra layer of bricks for my driveway to be up to the Enfield council code so I can get the driveway dropped.

Repair paving from patio - concrete slabs (45x45cm)- one is broken need replacing

I have 5 x slate stone slabs that need moving from a ground floor room directly into the garden, approx 25ft away. Each slab is very heavy and weighs approx 175kg. The measurements for each slab is 175cm x 75cm x 7cm.

5 100x100x1200 concrete repair spurs fitted to fence

Sage barista express grinder has stopped working. Coffee making side of machine works fine but when I press the portafilter into the grinder to grind the beans nothing happens.

0900-1700 with an hour lunch. Mixing cement in cement mixer and wheel barrowing to rear garden. In between mixes, opening porcelain paving and carrying to the rear garden.

The driveway is made of tarmac and has several holes and is uneven ( pictures 1-3). We would like our driveway leveled out and laid with concrete- so the old tarmac needs to be dug up and down to the correct depth and then the concrete laid and imprinted (as per picture 4 which is our desired result).

A rook 4m x 2.5m requires a thin layer of self levelling. It is already quite level but not level enough for our LVT flooring

Digging up existing concrete floor slab that is approx 140mm thick. Then re-lay flat concrete slab approx 50mm thick. Total floor area approx 5m2

Had some worktops delivered but they're currently too large to get into our flat. They need to be cut down to the rough size so we can get them up to the flat and out of the communal area.