Find a professional gate installation in Cheshire

Electric tailgate suddenly stopped working on Seat Ateca 2016, makes an error beep different to the one it normally did. Seems to me it may be the same issue as in this video (https://youtu.be/vOgBQ4sgwZM )but I need someone to check and repair if possible.

Take down an existing leaning brick gate post make good the foundations and rebuild it straight.

Audi A5 3.0 TDI 2007 CAPA engine Gateway fuze keeps blowing relating to heating when the fan speed is at 10 or higher it will blow, if I turn down it will be okay and last. Some problems with electrics which I have ran diagnostics, issues come and go, one time my horn didn’t work for a week which also is also linked to the “gateway” fuze, but didn’t blow on that. Possibly control module, but working out which one it is that’s fault is not my speciality. This problem has been on for around 1 year now but need to get it sorted so I can de-mist my car in peace. I will also say I changed the blower motor (fan) as well as the resister, so they aren’t the problem. Thanks - Due date: Flexible

TV suddenly cut out and is not responding to any attempt to turn it back on. - Due date: Flexible

Attached are a few photos showing the iron gates we currently have and also the entrance to the courtyard (currently a makeshift wooden gate). The courtyard is very much in progress! Currently the small part of the iron gate (single person entrance) is not fixed to the rest of the gate, meaning it stays stationary when the whole gate is opened (and will block a part of our courtyard entrance). We are looking to fix the small gate to the rest of the gate, enabling us to open the entire gate as one and push it flush against the neighbouring wall. Pushing the gate flush is made slightly harder as the building next door have put some railings over their windows that jut out and have also attached fake bricks to their wall, meaning that our iron gates now cannot swing open fully (they're left at an angle). We are wondering whether it is best to either (1) shrink our gates slightly, add a post at the end which will enable us to swing our gates out fully, although leaving a gap between them and the wall, or (2) make our current gates bifold so that they fold in on themselves and therefore we avoid next doors window bars. Please let us know if you can help. Will

I have a mitsubishi Pickup with a pegasus 4x4 cover, it has a normal barrel lock on it that has come lose from the surroundings, I need someone to either weld it back on whatever needs doing to fix it back onto the mounting, can supply plenty of photos if people need them. - Due date: Flexible

Metal post rusted and snapped need new one supplying and fitted and gate re hanging Its probably about 6 foot high - Due date: Flexible

The rear boundary of our garden is an old wooden fence that is about 14 metres long. It needs to be replaced. There isa shorter fence of about 4m on one side of the garden which also needs to bed replaced. There is another short section of fence with a gate in on the 3rd Street if the garden and the fence and gate both need to bed replaced as well - Due date: Before Friday, 17 June 2022

new garden gates built concrete post removing - Due date: Flexible

New wooden garden gate for rear garden required, need gate to be sourced and installed. I have a photo of the garden gate I have in mind that I can send you.