Find a local Tasker to help you make a kitchen cabinet in London West London

I recently had some kitchen cabinets installed in my flat but the people who did them did not do a great job and one of the cabinets (800mm standard from B&Q)needs to be reinstalled safely on the wall by a professional. Everything is assembled and ready to go and is probably a ten minute job if you know what you are doing.

I'm looking for some sliding cabinet drawers to be made and installed for a narrow kitchen cabinet (approximate internal measurements are L67cm W26cm D50cm but please confirm) -unless you can find a pre-made kit that will fit! Have attached an example photo of what I'd like. Drawers can be made of plywood (not particle MDF), 3 or 4 depending on what's feasible. I'm open to the door needing to come off entirely, but if possible to keep it on, great. Would ideally like the job done 30th or 31st Aug if possible.

One Kitchen cabinet to be put up.

The existing cabinet door is damaged and needs to be replaced. I would require someone to supply and fit and the new door.

The installation of kitchen cabinets. Work top instillation . Also tiling of the flooring and wall - Due date: Flexible

Install kitchen cabinets doors from Ikea, And put backing board to close off a gap causing a draught

Convert a sliding larder to a closed cupboard larder door with hinges and to add additional shelving. - Due date: Before Saturday, 14 October 2023

Hi, i just need 10 kitchen cabinet doors and 6 drawer fronts painting. They are all standard size (approx 500 x 715mm for the doors) and flat with no detailing. Please ignore the budget given, I’m open to offers. Thanks - Due date: Flexible

Replace 9 doors and 3 drawer fronts for kitchen cabinets - Due date: Before Friday, 31 March 2023 - Due date: Before Friday, 31 March 2023

I need a capenter / kitchen cabinet worke who can install 12 pull out drawers in 4 kitchen cabinets. I already have similar pull out drawers installed in 2 other cabinets as shown in the picture. - Due date: Flexible

3 Flat mdf doors to be rehung - small job - Due date: Before Tuesday, 28 June 2022

Hi, need the door on the integrated dishwasher to be realigned and also need one of the kitchen cabinet to be realigned. It is Wren kitchen cabinets. - Due date: Before Friday, 13 May 2022

I have left over materials from a recent kitchen instal. Would like to investigate if these could be used to build a cabinet to go above our fridge in the kitchen. - Due date: Needs to be done on Tuesday, 19 April 2022

I would like to get the kitchen cabinet - 9 cabinet doors and 4 draws painted off white and the counter to a wood finish - Due date: Before Wednesday, 22nd Dec 2021

Repost with updated description: Our Wren kitchen is basically installed (appliances in place, most boards and cabinets installed) but we need further help with the following: add remaining boards (one on dishwasher, 2 cabinet doors, panels around wine cooler and at bottom of kitchen cabinets); In addition, we need some minor plumbing help to get the dishwasher connected to existing pipes in the wall and the sink installed. Tools to be provided by handyman (e.g. for cutting boards, screws, etc.). We would prefer someone that could come help on Friday (5.11) or Saturday (6.11) this week! Due date: Before Saturday, 6th Nov 2022

We had a dishwasher which broke with a designated space in the kitchen cabinets. We were informed that all dishwashers were standard size and would fit in the space, however upon arrival the new dishwasher does not fit. The space is wide enough at the top but roughly three quarters of the way down the cabinet has either shifted or narrowed over time and will not take the ne one. We need someone who is able to either shave the MDF cabinet back on one side or replace a kitchen component the other side to allow the new dishwasher to fit.

- Installation of pre-assembled kitchen cabinets to walls and floor (including island unit). - Kitchen is in new extension - all first fix plumbing and electrical works have been completed already. - No worktop, electrical, plumbing, or gas services required - installation of appliances will be arranged separately. - Cabinet backboards will need to be cut in a couple of places to accommodate boiler pipes. - Kitchen design and photos attached. - You will need to provide all tools and fitting brackets. - Estimated 1 - 2 days work.

A kitchen cabinet door is not closing properly and needs re fitting, also the trim under the dishwasher and washing machine has come off and needs adapting to re fit. Neptune kitchen is all wood so is just a simple carpentry job.