Hire a professional washing machine services in London Camden

There is leaking from washing machine but we cant tell what it from Suspect from horse behind but not sure

It keeps flashing up f08 on the screen

Washing machine buttons have been wedged in. Panel needs to be carefully removed and the inside fixed. You should have experience with washing machines. I’ll also ask that you replace the rubber cylinder - Ill provide this part for you.

Faulty washing machine. Needs repair

Connect Washing Machine For £20

I need help fixing my Bosch washing machine

I need to install new washing machine And connection is a bit leaking

My washing machine was installed but I need it to be checked if it’s been done properly

John Lewis (AEG) branded washing machine has a fault. Water is leaking from the drawer during the wash cycle, I’ve run a rinse cycle to check, the drum completely fills with water and then the water starts leaking from the drawer. With a spin cycle, the water drains away, indicating there isn’t a blockage (I’ve checked the filter, it’s clean). Unsure what the fault could be. Machine is about 8 years old.

I'd like a qualified engineer to disconnect washing machine. This is a Blomberg machine

The shoot is blocked doesn’t work when I turn on the switch I also think it is blocking my washing machine as well

I require the help of someone familiar with washing machines to install a new gasket. I believed I’d be able to manage in myself but I’m having difficulty. I’ve already taken off the old seal so all that needs doing is fitting the new gasket and inner and outer seals. I can take care of putting the panels back on. Washing machine is a Hoover Dynamic Max. Thank you!

I have an integrated washing machine that needs to be detached and removed. Then a freestanding machine installed in its place. The freestanding machine is already unpacked in the kitchen. Ideally the old washing machine needs to be disposed of too. Which would require it being lifted up 10 stairs.

ON switch not clicking on

A metal ring came out of the silicone that holds the door closed and it’s been leaking ever since.

Hello, I have a washing machine brand Hotpoint. Model Aquarius WDL520. The rubber seal on the front side is a bit damaged and water leaks out of the front door during washings. I understand a replacement is needed for the rubber itself. Could you please advise on replacement availability and timelines to get this done? I am generally available on Fridays or weekends. Thanks

The old washing machine is located in a first floor bedroom. The washing machine must be lowered over a balcony rail to the ground floor and removed. Also, the new washing machine must be raised up over the same rail balcony into the bedroom. You need ropes and straps, because the stairs are too narrow. - Due date: Needs to be done on Friday, 12 January 2024

1) Bedroom Window Issue: The window in the bedroom does not close securely or stay closed, and I am looking for assistance in resolving this issue 2) Installation of Washing Machine Door: I need assistance in installing a wooden door on a new washing machine (to hide it)

The tube that takes water into washing machine has a little hole, so it needs to change and to replace with it a new one.

I need my new washing machine connected. The machine isn't directly next to the sink so I will need someone who can make a hole through the cupboards to allow the hoses to reach the sink.