How to get rid of mold at home

Mold thrives in places with frequent rainfall. But regardless of the weather, it can grow in any area with poor ventilation, including the nooks and crannies that sunlight couldn’t reach. As a result, many of us have seen mold and mildew sneak into our homes, especially in our bathrooms, walls, ceilings, and wardrobes! 

If not addressed immediately, mold can ruin clothes and furniture or even cause different health concerns. So before the problem worsens, here are some DIY tips on how to get rid of mold and keep them from coming back. If the problem is widespread or beyond your DIY skills, please don’t hesitate to seek professional help.

How do I know if my house has a mold problem?

Sometimes, mold is insidious; it's not always easy to spot. For example, it might be in your cupboards, behind your closet, and even in the dust jackets of your books. If you don't know where to start looking, here are some common signs of mold buildup:

• Visible mold stains or dark spots on surfaces
• Stained or spotted clothes
• Damp ceilings and warped walls
• Musty smell from walls, floors, or your air conditioner
• Frequent nasal allergies, asthma, or other respiratory problems

Supplies for DIY mold removal

• Face masks
• Goggles (especially for ceiling and walls)
• Gloves
• Newspaper
• Microfibre cloths
• Buckets
• Brooms
• Toothbrushes
• Old stockings
• Clove oil
• Vinegar
• Baking soda
• Spray bottle

How to get rid of mold on different surfaces

Removing and killing mold is a meticulous process. Plus, you must remember that different areas and items require specific cleaning methods.

If you aren't careful, your attempts to get rid of mold could damage your items or spread the mold problem. Here are the steps to remove mold from different materials, including porous and non-porous surfaces.

Washable fabric (curtains, cushions, beddings, and towels)

1. Start by preparing a clove oil and vinegar mold mix. Combine one cup of salt and vinegar in 10 liters of water with three drops of clove oil. Soak the fabric overnight.
2. Squeeze out the solution as much as possible, hang the material in a sunny place, and leave it until salt crusts form.
3. Use a soft brush to remove the salt over a newspaper and dispose of it afterward.
4. Wash the fabric with warm water and dry it as usual.

Non-washable fabric (suede and silk)

1. Put the items on newspaper sheets and leave them under the sun.
2. Soak the items in a mixture of coarse salt, vinegar, and a drop of clove oil.
3. Dry them as usual.
4. Brush off the mold and spray some clove oil onto the items.

Leather goods

1. Mix three drops of clove oil with half a cup of baby or coconut oil.
2. Wipe moldy areas in a circular motion.
3. Soak the items and dry them in an airy location.

Carpets

1. Mix three drops of clove oil, half a cup of vinegar, and five cups of water. Apply the solution using a spray bottle, then sprinkle some salt onto the carpet.
2. Dry it overnight and then vacuum it.
3. Repeat the process if necessary.

Grout

1. Dip a toothbrush or grout brush in a mixture of vinegar, three drops of clove oil, and half a cup of baking soda.
2. Brush the grout thoroughly.
3. Spray the solution onto the surface and leave it to dry.

Cupboards

1. Hang a stick of chalk with a ribbon to absorb moisture.
2. When the chalk becomes damp, hang it outside to dry.
3. Reuse the chalk.

Walls and ceilings

1. Mix three drops of clove oil, half a cup of vinegar, and five cups of water.
2. Use a clean broom and a stocking to absorb the solution.
3. Sweep the moldy area.
4. Allow it to dry.
5. Every month, spray the walls or ceiling with a solution of three drops of clove oil and one litre of water.

How to prevent mold from coming back

• Ensure adequate ventilation by opening your doors and windows on dry or sunny days.
• Insulate your ceilings to prevent condensation.
• After a rainstorm, check for leaks and water accumulation on your roof.
• Dry all wet areas.
• Keep your indoor plants dry.
• Wipe away condensation.
• Use a dehumidifier; set it to less than 55% humidity.

Is DIY mold removal enough?

Dealing with severe mold growth (and preventing them from coming back) is no easy task. If your home’s mold spores problem is too far gone, the best solution is to hire an expert. Fortunately, plenty of Taskers specializing in mold removal can do the job well for you. And you can finally say goodbye to your moldy blues!