Find a reliable appliance technician in Balmain

12 month old fan stopped working .

Washing machine makes noise. A fridge needs new rubbers (replacement seals).

Install a Miele dryer tray and dryer

We need a clothes dryer mounted onto a wall bracket in a small, restricted laundry space. It is likely a two-person job.

We have two NODE controllers for our garden watering system. Both now have new batteries but need to be re-set and set up to water at different times during the week

The dryer door closes perfectly yet the machine is not registering that and is giving a “door” error indicating that the door is open. The door is not open - it’s closed perfectly and the latch is clean, etc, yet the dryer won’t run due to “door” error. We need this fixed ASAP so we can use our dryer. This is a vented Fisher & Paykel drier stacked on top of our washer. Thanks!

tight laundry nook. dryer is around 45kg and needs to be stacked on top of the washing machine. The washing machine may need to be moved to fit properly with dryer on top. shelf in the way so can't tell if dryer will fit until it's on top of washer. may need to adjust placement of washing machine and restack if doesn't fit first time.

Assist with the installation of a new escea DS 1150 single sided gas fireplace. Plumber and electrician available to assist if required

Not cleaning dishes. Lost some options for the length of washes on touch screen.

Bosch condenser tumble dryer keeps stopping saying water condenser is full (when it is not). It also thinks it has completed drying the clothes when they are not fully dry. I need to turn machine off and restart for it to tumble again. I cleaned filter etc which helped a bit, but the issue is still happening.

Looking for Tasker to replace the pump in a LG washer/dryer combo. I have the replacement pump unit, just require to remove old pump and replace with the new pump. I’ve started the job myself by removing top panel however having difficulty removing front panel to access the water pump to replace.

We have purchased a new dryer which is ready to go in the kitchen. The location for the dryer is above the kitchen bench. The cavity is ready to go. The task is the put the wall brackets in, and mount the dryer on the wall.

I just had a new heat pump dryer delivered, and I need someone to help me unbox and connect it.

There are 2 tasks. **Task 1** The TV has already been wall mounted above the fireplace. The single Samsung OneConnect cable needs to be fed inside the fireplace down into the newly installed fireplace cabinet. The OneConnect box will sit inside the fireplace cabinet. The fireplace is not active. The task required is to: - Remove TV from wall (I will help) - Carefully and cleanly drill hole of the size of the Samsung plug in wall (est. 45mm) - Feed cable down the cavity, and the rear of the cabinet to the hole at the bottom of the cabinet - Clean up - Rehang TV on wall mount (I will help) **Task 2** Install pendant light over the top of the stairs. Pendant light specs are as follows - Materials: Metal | Plastic | Textile Cable Finishes: White/Telegrey | Black Cable Colours: White Dimensions Large: Shade Ø 20cm | H 25cm | Cord L 300cm Lamp: E27 Dimmable: Globe Dependent IP Rating: IP 20 Class: Class 2 (Double Isolated) Taskers must have experience in this domain, top ratings and references from recent work. Thank you.

Just bought a new dryer. It weighs 50kg. Need someone to help me lift it onto my washing machine.

There is some smoke coming from my fisher and paykel washing machine drum (front loader). Smells slightly of burning rubber. I've turned it off, but need someone to come out, diagnose and fix the issue.

The latch to close my Simpson Sirocco 350 appears to have moved/ broken. The dryer works fine when I hold the door shut.

Need to mount 4x wireless outdoor Swann security cameras and 1x solar panel around the perimeter of a home. All cameras will be installed at a height that needs a ladder, no more than 3.5m Details are 1. Camera 1: mount to a brick wall 2. Camera 2: mount to wooden roof frame 3. Camera 3: mount to wooden post 4. Camera 4: mount into place under the eave, and connect to solar panel 5. Solar panel: mount panel to upper outside verandah, and its wire securely along the wall, so that it can power Camera 4. You will need to bring your own tools, ladder, and some wire clip nails to secure the wire from the solar panel to the wall. The task requires drilling into brick, wood, and sheetrock. The mounting brackets supplied are all Swann OEM equipment. No electronic installation is required, simply install the brackets, mount the cameras to the brackets, and plug the solar panel into Camera 4.

Samsung front loader wont start cycle as the barrel will not turn. It has been checked for anything jamming the barrel but nothing obvious found.

Remove old dishwasher drawer and timber board with bolts (rusted) holding it in place. Add new timber board and install new dishwasher drawer