Find an experienced builder in Carindale

Add approx 44 m2 to existing concrete driveway and path - with exposed aggregate finish to match existing

We are installing a brick fence and we need to run an electrical conduit under a driveway for lights and gate motor. I need a horizontal bore between 30-100mm size for the pipe/electrical cabling. This driveway is approx 5meters wide.

New footpath and patio options required. Options could be: composite decking, timber, concrete, etc

Images explain what needs to be done.

Our fence that is shared with our neighbours is becoming a bigger issues then we had hoped for. To replace the fence, our pergola needs to be removed because the pergola posts are attached to the fence. We want to avoid removing the pergola (3x3sm) because 1)it can be a very costly to replace it and 2) it offers shade to the tenants, especially during summer. What we are hearing is that the pergola lacks independent posts and it relies on the fence for support. This setup complicates matters when we need to replace the fence. Can you recommend someone (or a handyman) to investigate/guote whether the pergola can be supported independently. Specifically, the pergola might need around six posts to determine if the pergola can be preserved on its own and be built 1m away from the fence line.

Assemble a 3m easy shed product on a concrete slab. All parts supplied

Small block of 4 units. Driveway and pathways have recently been cleaned. Some minor hairline cracks in driveway and pathways need to be filled with sika flex or similar. Small section of loose cracked concrete on path needs to be re-laid as is a trip hazard (approx 1m x 1m only). Onsite attendance and written quote is required before Body Corporate will approve work. - Due date: Flexible

Assemble small garden shed. Need done asap. Partially assembled. - Due date: Before Sunday, 10 December 2023

Need a suggested repair for the driveway. It is a terracotta 15mm tile. I believe 300 x 300. Due to the design the tiles crack and pop especially down the bottom of the driveway. You can see where it looks like previously someone has cracked the tiles and mixed into a cement mix to prevent cracking on the left hand side. Need a suggestion and price to repair the whole bottom 2 rows of the driveway. Will provide the spare tiles. Also have around 6-10 tiles which are popping which need to be repaired. Please see photos. - Due date: Before Friday, 15 December 2023

Bought a ramp but need to bolt into driveway. - Due date: Flexible

Bought a ABSCO SHED from bunnings 2.27 W 0.85m D 1.15m H Needs to be assembled, have bought it today but I’m farkin hopeless at getting this done … help! How much will it cost? - Due date: Flexible

I need to replace some missing or broken red tiles in my driveway. They form a part of the border of the concrete driveway. I can send photos if needed. I need to know estimated time and cost for this job. - Due date: Before Saturday, 22 July 2023

Saw cut or jack hammer the top of the concrete driveway inside the property boundary. Total area is 3m x 2m. Cut or jack hammer in sections maximum 400 x400 so that they weigh less than 40kg. Leave demolished concrete on site - Due date: Before Saturday, 17 June 2023

Repairing of pebble concrete driveway gouge made by stump grinder- approx. 2x2 inches in size - Due date: Flexible

To build a deck (around 3.5m x 8m) preferably with shelter extending from patio at the backyard. - Due date: Flexible

Demolition of Commercial restaurant,75m2. Strip out ceilings, remove all electrical points, cap all plumbing, remove tiles, smooth concrete floor, discard rubbish. Paint walls white Budget is 14K - Due date: Before Monday, 10 April 2023

Patio around pool deck is need to be installed

Still figuring out the plans and details but just trying to find someone who can do it first and has some past experience building similar things. - Due date: Flexible

DETAILS Hi all - We’re looking for available builders that they can help me to build a Gable shed at Carindale. Shed Dimensions: 5.8W x 7.0L x 3.0H Inclusions: 1 x Roller Door ( 2.4H x 2.4W ) 1 x Roller Door ( 2.4H x 5.0W ) 1 x P/A Door 1 x Window ( .790H x 1274W ) * Insulation on Roof ( Aircell ) * Vermin Flashing around the shed

DETAILS Hi all - We’re looking for available builders that they can help me to build a Gable shed at Carindale. Shed Dimensions: 5.8W x 7.0L x 3.0H Inclusions: 1 x Roller Door ( 2.4H x 2.4W ) 1 x Roller Door ( 2.4H x 5.0W ) 1 x P/A Door 1 x Window ( .790H x 1274W ) * Insulation on Roof ( Aircell ) * Vermin Flashing around the shed