Find an experienced builder in Inner West Sydney

One flyscreen on first floor of 2 storey house and one flyscreen on ground floor; broken hinge on wooden door of outside shed; draft stopper on rear wooden door.

Install of garden shed with Concrete Pad: Assemble Bunnings shed as shown in the photo, will be delivered on 25/2/2025. Supply and pour concrete on ground, flat, made of existing sand layer and synthetic grass. Please review the detail in Bunnings Link: https://www.bunnings.com.au/absco-sheds-2-26-x-1-44-x-2-0m-monument-regent-single-door-garden-shed_p0374579

I need someone had already Experience for a small Kitchen Demolition , have continuity with jobs when this one get done for the Right person

Demolish demolition remove excavate bricks prepare color bond fence. demolish demolition remove excavate broken bricks to prepare the ground for construction of color bond fence. In burwood. Measurments is approx 30cms height 30cms depth. The Length is appox 20metres long. Thanks.

Automatic aluminium sliding remote control auto motorised gate for car entrance driveway approx 3.5metre wide opening . i will arrange removal of existing old gate myself. Suburb burwood.

Build in burwood standard carport or cantilever . The ground has pavers.

Pour concrete driveway after remove block paving . Approx 5metre by 4metre. . Not the council land. Inside my own boundary. Suburb burwood. Thanks. Alvin.

Assemble louvred pergola 4x3

We are looking for a builder to assist in an internal renovation (no CDC or DA needed at this stage). The task includes building 1 ensuite, remodeling one bathroom, building wardrobes etc. We may need assistance with painting and flooring, but this can be negotiated. The two key points here are (1) we are planning on knocking down and rebuilding in 18 months, so we don't want to spend a lot; and (2) time is crucial. We also want a set price with no variations. If you're able to start ASAP, please reach out! AT won't let you post more than $9500, but obviously we will discuss pricing!

I need a draftsman to prepare drawings and to submit DA to inner west council. I have the cad drawings and all measurements on usb from the architect. I need this done asap. Simple back of house reconfigure kitchen/bath/laundry. 1 level.

We are looking for a builder to assist in an internal renovation (no CDC or DA needed at this stage). The task includes building 1 ensuite, remodeling one bathroom, building wardrobes etc. We may need assistance with painting and flooring, but this can be negotiated. The two key points here are (1) we are planning on knocking down and rebuilding in 18 months, so we don't want to spend a lot; and (2) time is crucial. We also want a set price with no variations. If you're able to start ASAP, please reach out! AT won't let you post more than $9500, but obviously we will discuss pricing!

pour 40m2 concrete，no excavation needed

Need someone for Small Garden shed assembly in Garage - Must be today - Preffered experienced AirTasker ! Please advised your experience when quoting - See attached picture (no based required, just the frame). - I'll help to put up - I have some tools but bring your own as well if you have > See pictures, Similar to the one against the wall but smaller

Remove old poorly built pergola and frame new pergola in place of it ready to have new roof attached

Concrete, brick & tile breaking and removal in our front garden. I need the tile and concrete removed from our garden. The concrete is about 3-4 inches thick, so you’ll likely need a jackhammer. There is also a small brick border of some plants that we want removed. The brick is only 1 brick high. Red lines in the picture are what we want removed , green we’ll keep. Location Leichhardt.

I need this pergola to be assembled https://cosydeals.com.au/products/aluminium-pergola-gazebo-3x3m-13

Hi we are in process of putting in a new pergola in our garden and we need the frame painted as well as the outside wall of back of house. Will also need a few holes filled/ bit of sanding and prep work. Paint will be supplied. Must be done this weekend - Friday/ Saturday/ Sunday/ Monday at latest.

Replace 5 timber posts that are 90mm × 90mm × 2400mm on a pergola. The beams dont require replacement. This will require propping up the aluminum louvre frame, removing the trellis and reinstalling them.

Need help with moving box to garage and installing an Easy Shed garage shed with sliding door. 2.25m w X 0.78m d X 1.95m h

- Timber Window in Lightweight timber framed & clad wall (head/sill detail and jamb detail) - Aluminium Window in brick veneer wall (head/sill detail and jamb detail) -Aluminium sliding door opening in timber framed & clad wall, opening onto a timber deck with no stepdown (head/sill detail and jamb detail) - Timber entry door in brick veneer construction with a step down to paving (head/threshold detail and jamb detail) Unbranded/unwatermarked drawings. These are not for council submission or construction. File to be sent as PDF Annotations need to be Tahoma font, plain line with filled arrowhead Needs to be drawn to Australian Standards My budget is my limit. If this doesn't suit you, I understand and hope you find a job in your budget range.