Find an experienced builder in Lane Cove

2 parts to this job. First job is removal of corrugated iron sheets that have bee used as formwork for old veranda slab. the full area is exposed and the sheets need to be carefully cut through and pulled down the sheets are each about 2meters long and 750 wide and are over an area or 2m x 5 meters. one end of the sheets along one 5m length is already cut so this means there are 2 x 2m lengths to cut close to the brickwork and 1 x 5 m length (across the 750wide sheets). Once cut the sheets should lever off easily. The second part of the job is to carefully cut out a small part of the existing slab - about 1 m x 500mm - the slab is approximately 110mm thick. In the pic, this is the area at the edge ion the slab directly in front of the door area (where the brickwork has been taken out. This is overhead work and muct be done carefully and safely. There is full access to the area. Demolished material to be left on site directly outside the area

This job is only open for a valid licence and insurance holder. Experienced builder needed to build a deck and pergola for my backyard.

Kitchen demolition including non-structural wall demolition Rubbish removal and disposal

Looking for someone to lay concrete on our driveway and walkway. Area is about 50m2 and we’re looking to have 120mm thickness for the concrete.

Remove and replace drive way crossover and wings - Due date: Flexible

I need balcony/back door landing enclosed with window doors on one side. Will attach photos. It’s approx 2 metre x 2 metres - Due date: Flexible

I moved into a property without a gate. The street has rallied around and bought one and now we need to get it installed. We require to cut some of the concrete driveway on one side and dig a hole on the other side of the driveway and back-fill with concrete once the 2 posts are in place. - Due date: Flexible

Build a new patio/pergola - Due date: Flexible

Hi there! I have three tasks to be done: 1. Mount a hoselink. Note - I don’t have the screws, you will need the screws needed to fix the mounting plate to my brick wall. 4 screws/plugs needed. 2. Assemble a shelf that goes inside a shed. Need to Empty the shed (pictured), assemble shelf (pictured) and put shed items on the new shelf. 3. Drill a hole in the top of my rain water tanks and mount the tank level monitor to the top. This should be fairly simple, it is a tankmate r3 wifi - instructions are here: https://tankmate.com.au/pages/sensor-installation Any questions let me know! Ladder for the tanks is provided. Would prefer for someone to start on this on Wednesday or Thursday morning so I can brief you before I leave for work (I leave at 9:30am) Thanks! Dan - Due date: Before Friday, 17 February 2023

Installation of Mimosa Gazebo/Pergola including fixing /anchoring to pavers Model Mimosa ‘Brighton’ 2.9x3.6 metal with slat roof. See https://www.mimosaoutdoors.com.au/product-range/outdoor-shades-and-gazebos/0177358-white-brighton-gazebo - Due date: Flexible

Dimensions approx 6 x 3m. I have paint but must bring other equipment brushes, dropsheet etc. Has base coat applied a year or so ago but likely needs to be redone plus a tpp coat. - Due date: Flexible

We need our outdoor pergola painted. It currently has an undercoat that is a year or so old and not looking good so expect needs to be redone and a top coat. Dimensions are approx 6m by 3m - Due date: Flexible

Demolish/ remove damaged section of existing sloped concrete driveway. Form up and erect new concrete sloped on damaged side only. Approximate dimensions of slope (m) 0.6 wide x4 long x 1 high. - Due date: Flexible

Demo and removal required for external laundry, buildings and shed - including slab. Possible asbestos, plumbing and electrics in laundry. Narrowish access,a 1 tonne machine could fit

To do the task you need a medium ladder (about 1.8m height) . And rack on extended pole for the reach . If you have these right tools would be a 15 mins job . Date is flexible, as long as a sunny day

Remove an older mid sized garden shed and replace with a new one being delivered from Bunnings - Due date: within next 2 weeks

Stripping pebblecrete from pool surrounds (approx 20 sq m) and grinding to prep for laying tile. Pebblecrete is on a cement bed against a concrete base. Note that access is via a lot of steps as it is a steeply sloped block. Part of the pool edge is above ground level so there is a significant drop in places. The fence has not yet been removed. The pool is half empty at the moment, please specify if you need it completely drained. Job completion date is not fixed. Power is available from pool equipment. Disposal of waste not required.

Front driveway gate is not closing properly and gates probably need to be re-hung. I'm available anytime you're able to come by & quote..