Find an experienced builder in Mount Martha

Need a easy shed put together 4.5m x 3m

I need a certified builder to advise me if a panty is safe to remove or it’s a load bearing wall in the house. 99% sure it’s not but best leave it to a professional to decide. Also tell me is some creaking floorboards are normal and what could be done about them.

Basic plans for a Single Timber carport. Gable roof 6x 3.1m. Corrugated steel roof.

To replace cracked pavers with thicker pavers to take weight of car. Area is next to bricks driveway. Size is approx. 6m x4 m. Installer to supply thicker pavers. Base is sand on crushed rocks.

One pergola roof beam requires replacing due to rot. Replacement dimensions are 140mm x 45mm and approx 3900mm long. One new painted beam of 4200mm will be available on site. Please advise approx fee on contact. - Due date: Flexible

You’ll need to spread out the 20mm rock that’s being delivered along the driveway. Driveway approx. 25m long X 4m. At the entrance, the driveway is currently too high for the new gates. You’ll need to dig around 2-4 inches out and smooth the gradient before laying rock at the gates. - Due date: Needs to be done on Wednesday, 20 September 2023

Paint outside entertainment area - Due date: Flexible

Remove concrete section and match replace with asphalt The length and width is approximately 6 meters x 1.5 meters - Due date: Flexible

Hi, my name is Adam and I am needing someone to put together a garden shed for me? I have included photos of the brand new shed as well as a link to the Bunnings website for more details. I have already had someone lay a concrete slab but need someone to assemble the shed and get it into place. https://www.bunnings.com.au/absco-sheds-3-00-x-0-78-x-1-95m-ezislider-double-sliding-door-garden-shed-monument_p0374571 - Due date: Flexible

6mx6m pergola attached to rear of house over decking .some upright posts and horizontal beams need replacing - Due date: Flexible

we have a approx 200sqm concrete drive way that needs a really good high pressure cleaner to remove as much existing paint as possible and then must be painted in 2 x coats of Berger Jet dry NON SLIP in Colourbond SHALE GREY colour AND Berger Jet Dry True Grip granules Price of quote to include pressure wash, paint (allow for 2 x 10l @$250 so $500 total), granules (allow for 3 @$25 so $75 total ) painting and all clean up. if you need more paint or granules we'll pay extra Area is 200m2. Note pebble feature inlay is NOT to be painted. All rubbish to be removed (except remaining tins paint) Bring your own brushes and roller etc Must send photos after first coat AND and then send photos when done just to help us know for sure it’s 2 coats. - Due date: Flexible

1) Put in 4 support Posts on a verandah supporting the Roof. (See attached). Currently held up with aquiprops. 2) insert a steel post to support a suspended slab. (See attached). Currently held up by aquiprops. - Due date: Before Monday, 15 August 2022

I need a garden shed assembled. I will include all details in the photos. Bought from Bunnings. There is a free installation video and existing concrete slab - Due date: Needs to be done on Sunday, 10 July 2022

I need a professional person to install an outdoor fireplace including the flue for the pergola area. I have all the equipment including flashing, flue and fireplace. - Due date: Needs to be done on Monday, 27 June 2022

Installation of large shed - Due date: Before Monday, 13 June 2022

We have an ‘easy shed’ 1.6x 3 metres which needs to be put together. Two person job. We have started putting together however we just don’t have time to complete at the moment. Due date: Flexible

Pergola beams have protective plastic on them that needs removing - Due date: Flexible

1.8m h x 1.5m l x .78m d aviary and a 1 3m h x 2m l x .970m d bike locker assembled asap. - Due date: Needs to be done on Wednesday, 15th Dec 2021

Polycarbonate sheets are coming off. - Due date: Needs to be done on Monday, 15th Nov 2021

hi there, Essential job - currently can’t use driveway gate snd no light near entry of garage. So Electrician needed for x1 job, x2 small tasks. flexible day/time that suits you. Mornington/Mount Martha area. 1) - we have installed a new auto opener on our driveaway gate already, But actual solar panel, needs to be relocated about 10 metres away to get more sunlight (as current position is too shady and brand new unit wont power up due to lack of light), so will simply need to add some extra wiring along a fence line for about 5-10metres. Alternatively if easier can wire control box into mains, house switchboard is about 10metres away. whichever works and is easier It's a small solar panel/system, which powers the electric opening of driveway gates. It's remote operated. Also one of opener hinges will need to be screwed back onto gate (it's come away) Please see photo of model/unit ATTACHED 2) we have purchased a basic twin spot light with auto sensor built in. it simply needs to be mounted to tin garage wall (and wired into mains line, which is right next to the mounting point on garage. Job can be done ASAP time this week. flexible. $75/hour electrician rate. i have included 3 hours in job Labour only on air tasker job. Additional materials/parts extra on top of 3 hours labour fee on airtasker MODEL DETAILS FOR AUTO GATE OPENER (with solar and mains connectivity) BRAND: E-GUARD (from mytopia/ebay) MODEL #: DSN-148 (solar top model) Double Swing - Electric Model: DSN-148 Voltage: 24V Max Per Leaf Gate: 3.5m Max gate weight: 900kg Waterproof Grade: IP55 Remote Frequency: 433.92mhz Single Swing - Electric Model: DSN-128 Voltage: 24V Max Per Leaf Gate: 3.5m Max gate weight: 450kg Waterproof Grade: IP55 Remote Frequency: 433.92mhz Double Swing - Solar Model: DSS-188 Voltage: 24V Max Per Leaf Gate: 3.5m Max gate weight: 900kg Waterproof Grade: IP55