Find an experienced builder in North West Melbourne

Install 1.5 x 800 shed on concrete base! No anchoring required

2 square metres of concrete removed and replaced with standard concrete ( no colour matching needed )and 2.8 metres of concrete cut and removed ( the width of this is approx 15-20cm )

I have a 3m x 0.78m x garden shed with sliding doors to be assembled onto a concrete slab.

pressure wash a driveway and then once dry apply one coat of pavecoat charcoal coloured paint - air tasker to supply products and equipment (photo of product in images from previous job 2 years ago.) $200 plus 130 for paint ($330)

Concrete Driveway for new home. Please refer to the attached site plan 1. The area we would like concreted in the Dark Grey area and the area marked in light blue 2. Also would like to get Concrete Pavers as outlined in the drawings Thank you kindly.

Bunning’s colorbond gable shed 3x2.2M Concreated already.

I’m buying a shed from bunnings, approximately 3m x 1.5m x 2m Need it installed in my back yard

Assemble garden shed on established concrete slab. Shed dimensions are 2250 x 780 x 1980. All parts and instructions provided.

We want to best use the space in our big backyard. We would like a design for wooden pergola, fire pit and pizza oven eventually.

I have few cracks on the aggregated driveway. I want someone who can clean it with professional preasure washer and fix the driveway with material and top of similar aggregated stones.

Easyshed assembly https://easyshed.com.au/products/skillion-roof-garden-shed-3-75m-w-x-1-5m-d-classic Assembly on concrete driveway

Hi Need to install concrete base (or paving slab) and install this shed from Bunnings: Absco Sheds 2.26 x 1.44 x 2.0m Surfmist Regent Single Door Garden Shed (White) Location of shed is shown on photo. The shed should sit flush with the concrete pavement adjacent so some digging required. Note the area in photo is 2.6mx1.5m so you might want to fill this whole area with concrete or pavers to avoid weeds Shed will be supplied but you will need to provide all other items.

I need a gate to my driveway. 360cm wide and 180cm height. It has concrete floor and brick house wall on one and timber fence on the other side. I am not sure but I think I want metal frame and timber on top. possible opens in the middle so I can park my car in. I will buy eveything needed. you need to use your own tools and vehicle to transport all frame and timbers. I will pay agreed price on top.

I want someone to install my Stratco Handi-Mate Locker (Handi-Mate Locker Dimensions Width Depth Wall Height 2910mm 850mm 1900mm

I have the council permit, all the materials are on site and ready to go, I just need the builder to build the carport as I haven't worked with metal before. Looking for someone who can build all the frame of the carport and/or do the entire job (depend on cost). I have a white card and building experience and looking to assist to keep costs down. Previous carport has already been dismantled.

1.5x.78 narrow slider shed needs assembly and then anchoring to existing pad.

We are needing a Master Builder or Structural Engineer to visit our home and make an assessment of whether a wall in our kitchen is load bearing or not. Full access under house & to original plans. Please show your accreditation. Thank you!

We have an outdoor pergola that Pergola is 11m by 8m and a bedroom that is 3.2 x 3 We have paint for the pergola, not the room yet.

Unscrew 6 sheets and cut and install 7 roof sheets on pergola. 2.4m depth x 7m approx.

Hi, I am looking for an experienced shed assembler. I have a 3x3m easy shed that I need assembled and put into place. Brand is easy shed