Find an experienced builder in Preston VIC

Hi, Need someone to repair or potentially replace damaged frame for exterior driveway gate. Existing damaged frame can possibly be bent back into shape and fixed to concrete using bolts. If this is possible. If this is not possible then replacement frame to be built using galvanised steel posts or similar for existing gates. 2x Gates to be re-hung after this is completed. Gates are quite heavy and tall, 1.8m and I am happy to assist in moving them before the other work takes place.

Drainage was clogged and plumber has attended to unclogged. Need to clean up the waste / tissues

General labouring on a build - $45 p/h - multiple days work

Install Easyshed 1.5x3.0x2.1m skillion roof shed with supplied concrete fixings All onsite ready to go Let me know how much?

need to build a partition wall in our office Frame and then plaster Approx 350cm length 200 high Please quote for materials and labor Office is on 1st floor - one flight of stairs

I have a small length of concrete (approx 2.5m x 2.5m) which needs removed, plus some bluestone bricks as a siding. The concrete is not reinforced but it is thick. Id then like a brick driveway (3m wide and 2.5m deep, to between the gate posts) built to replace the concrete, using a standard brick pattern. The driveway needs to withstand cars passing over it. I have some reclaimed bricks and can supply more. The area outlined in the images in red and marked with a red X is the area in question.

I am re concreting my drive way i would like my old aggregate drive way broken and cut and removed and also needing the concrete cut and removed from the two sides of my property. you are welcome to come and have look at the job. Please also quote the backyard to cut and remove concrete also. - Due date: Needs to be done on Monday, 29 January 2024

1.50 m (w) x 0.78m (d) x 1.95m (h) Door wall height 1.80 - Due date: Flexible

Dig up driveway and take away - Due date: Flexible

We need old cubbyhouse deck platform sandpit and concrete pad and edging demolished and removed including any post footings. Structure is 2.6 x 1.6m x 1.3m high Existing water tank is to be retained and set aside. Concrete pad under tank to be demolished and removed. Sand is to be retained and set aside. Good access from ROW. - Due date: Before Friday, 13 October 2023

Hi just looking for someone to weld the poles to base plate and top of pergola. 6 poles in total - Due date: Flexible

I require x 3 small concrete slabs poured for the entrances to 3 garages off laneway. The property is 6 townhouses and has side entry from a lane way and each are 3mx 1.2m wide x 3.0m length so approximately 12sqm it can be done in plain concrete, crush rock base and steel.You can see from the photo the other owner has done his 3 units in black concrete. Please note this price is inclusive of materials and labour. Don’t make an offer greater than the price listed as I have built lots of properties and know what it’s worth. - Due date: Before Saturday, 27 May 2023

Construction and installation of a 2.3x1.3m garden shed in my backyard - Due date: Before Monday, 8 May 2023

Move 1.5 cubic meters of soil Into garden beds - Due date: Before Thursday, 4 May 2023

Need a set of festoon lights installed on the pergola. Lights are partially attached now but need to be removed and redone. Must have own tools and bring required attachments to do the job. - Due date: Needs to be done on Thursday, 6 April 2023

I am looking for a draftsperson to draw up plans required to submit to surveyor for council permits to build a veranda with deck for residential property - Due date: Flexible

I require approx. 6 meters of outside weatherboards to be painted with existing paint colour to match (2 coats). Relevant area to be sanded back prior. Similarly, there are 2 window frames to be painted as well. I also require an existing deck to be painted / re-stained - Due date: Before Friday, 16 December 2022

Build deck 3.3 m wide and about 12m long Will require stumps in ground, preferably metal+concrete Then something like Britedeck over the top, in a blond or teal colour

Hey there, I’m located in Preston. I have a ground floor warehouse that has super great access for parking / loading. Im looking to build a divider wall between my workshop area and office area. Wall would be an L shape stud wall, 5m long x 5m long x 3.2m high. Solid concrete wall on one side and concrete floor to drill into. The ceiling is suspended but I think we can get away with not needed to fix it to a truss, as this wall is purely acting like a divider and does not need to be built to standard (I’ll need to rip it down in 2 years when I move again). Looking for you to supply timber, and plaster. I have 2 other people who are very capable on drop saw, measuring and general labour who can assist you the whole time. Thanks Great access, see photos. - Due date: Needs to be done on Sunday, 2 October 2022

Need help to drill 3 bolts to attach hinge to gate post. The post is hollow and about 2mm thick. Will also need to widen holes in hinge as they were previously soldered onto the post and holes covered up. Also need help to drill screws to put 4 panels of shed together. Bolts provided. See pictures. Today or tomorrow would suit.