Find experienced local carpenters in North Sydney

Hi. I need a Easyshed Bike Shed put together. https://easyshed.com.au/products/garden-bike-shed-2-25m-w-x-0-78m-d-classic Just the shed straight on to the ground (No base).

Cut a timber bed base in half

Hi, we need a stonemason to replace the existing vanity top. The dimensions are 700mmX400mm The job requires to supply a white natural top and drill the waste outlet. The current top is 40mm so a 20mm stone and 20mm mdf backing board for additional strength. I will provide the the existing timber shelf to use as a template

Pending Strata approval, that can extend to early July. Privacy screening 90cm slats with 1cm spacers. Fence screen to be fixed to current balcony walls. Black posts, and slats to match existing fence colour, if possible. First image section 1, from right to left > 1.8meter height x 0.6meter wide, section 2. > 1.8 meter height x 1.2m wide; Next image from right to left, after existing fence screen (that is 1.6meter high). >1.6meter height x 2.61 meter wide, next section in the left corner is > 1.6 meter height x 1.1 meter wide, next section to the wall needs to be > 1.6 meter x 0.6 meter wide. Existing Mounts in the next images are connected to balcony wall, with concrete base under stones. Answers to some questions. Thank you for your questions. The units are on the ground level, in the rear block with a side passage that has about 8 to 10 steps. Access is convenient to the balconies over some stones. The 2.6.. m slats is in the second image extending across the longest part of that balcony, from the existing screened fence. The existing screen is fixed to the walls instead of posts. More like Channels. Like the first image of the next balcony the 0.6m and 1.2m covers the corner to the wall. (Similar corner repeated for the second image, but not visible). The slat measurements should be taken again, once the channel posts are fixed to the walls to ensure its accuracy. Hope that clarifies what is needed. The mount images show how the old screen is mounted to the walls without posts into the ground. Below the rocks is a concrete base. Regards / Imo Hope, this helps to clarify the lateral slats needed to help screen the first image to cover the water tank. And to complete the screening on the second image. (complete balcony)

Restrain mortar to a lighter colour.. from red to white .Bigbtwo sort house will require two coats with stain ( not paint)

Assemble garden shed. Model Stratco Handi-Mate (HM01) with sliding doors. Location Thornleigh. Additional photos of the assembly location are provided. Considering the shed has a sliding door, a diligent assembly ensuring strict dimensional tolerances is necessary to ensure long term functionality. Suitable tool (drill) will be required to anchor the shed to the concrete slab via anchor bolts. the attached photos show the elevated concrete slab "platform" a footprint of which appears to be +/- the same as the footprint of the shed itself as published by Stratco (the shed manufacturer). The job may suit an experienced shed installer with previous experience with Stratco products and who, as such, may also have some (typical) spare HDG brackets / anchor bolts in case needed to safely anchor the shed. Stratco HM01 shed dimensions (nominal): 1.86m (W) x 0.85m (D) x 1.90m (H). Any further questions or concerns, please let me know. - Due date: Flexible

Re-line existing shed, remove old/install new shed roof, install new double door, relocate window and install new decking

Need some one good at paint covering dried water stains on the ceiling like a pro, colour matching

Need this easy shed finished. All panels have been put together individually as per photos but need to get this bad boy finished off.

Fee by negotiation. Deck size: 3.5m * 7m. Deck was pressure cleaned yesterday. Please bring stain, brush and any necessary tools yourself. We live in Artarmon and urgently need someone to do the job TODAY. Thanks!

Repair timber table top, refer to photos before, can send more. Part of the top that holds the timber planks in place has come loose.

Some kitchen and living room doors need hinges to be adjusted. Additionally, one of the bedroom doors doesn't close properly and needs some adjustments.

Sand back cedar gates Re stain gates Repair and replace a piece of treated pine battern on the gate and repaint

It’s a a 2.25m wide x 0.78m deep x 1.31m bike shed that needs installation in my garden on concrete fixing. I can give you hand if need to. It’s new bought from EasyShed.

Fix/or replace two pieces of broken wood and paint them, very simple job Please include supply and install in this job, price should include all fees and charges Top piece 2600mm x 140mm x 50mm Mid piece 1890mm x 25mm x 90mm

Replace a rotted timber of deck

The area is 8m2. I’ve ordered width: 288cm height: 270cm then trimmed on site. Here is a link: https://oliveetoriel.com/products/trellis-luxe-in-heritage-blue-wallpaper Price negotiable. Please give a quote.

Hi carpenters or handymen! I’m needing someone that can install wood trim and caulk to my laundry bench to make it look pretty ! Will also need the person to maybe tidy up the cut out and seal it too :) Will pay extra for materials :) Please reach out if you can help !

Secure balcony railing/replace damaged slats Fix kitchen door Shave off linen cupboard door Lattice (maybe) to hide ugly pipes Lattice (maybe) to cover underhouse area replace 1 metre of vinyl in kitchen Must have great airtasker references Not sure how long this will take so have put up hourly rate and pay cash for rest

As the photos show, there is a collection of about 20 kitchen knives that need sharpening. Three more are in dishwasher. Make an offer - I have no idea what the job is worth. - Due date: Flexible