Find experienced local carpenters in Sydney Eastern Suburbs

I have an old door that has been painted a couple of times. I’d like it stripped down to its original timber so that I can re-stain it. Currently just want to test out how the one door will look with the stain I have in mind, and if I like the look i do have 4 more doors. Current task budget is for one door for now. Tasker will need to take the door off its hinges, bring it outside (it’s a solid pine door and quite heavy - I can help) and have some equipment such as a stand to work on, sander, scrapers etc. I can supply the paint stripper, unless you already have some.

We need our buffet built

Enlarge fridge cavity. Current cavity has cupboard above fridge. Need to remove cupboard doors, then remove cupboard shelf, and reinstall shelf approximately 10 cm higher.

I have a flat packed STILLA Richmond 6x4 shed with a heavy duty floor, double doors and an extra window to be built. Picture attached of another I’ve built with the same configuration.

Remove (drill) 20x 4mm diameter SS rivets and 4x 10mm SS screws. Make good holes - weld to fill holes and sand flush - to stainless steel food grade.

Hi there, I have a TV wall space that I would like to have some custom shelves and cupboards built for. The space is 2680 high, 600 deep and 1970 wide. I’d like 3 cupboards with 2 drawers in each at the bottom. One full length shelf above the TV and one small shelf either side of the TV. First Picture is the best example of what I’m after albeit without the detailing/panelling. Need more modern look. Second is draft sketch and other 2 are the actual space. MDF is fine. Will need it sprayed with colour. Thanks

We really like this table which can be extended from a coffee table height to a dinning table (130cm x 76cm). However, we don't love the ceramic top and don't think the style will go with our other furniture. We are wondering if it would be possible to pull off the top boards/stats and replace it with some better quality wood or an artificial material which is better suited. I am not an expert, but I assume it would require removing the old pieces, cutting new ones to size and treating as required, and fixing them appropriating in the place of the old ones. We are thinking Teak would be good, and could use 2 of these cut and sanded to size. https://www.bunnings.com.au/specrite-1800-x-405-x-18mm-golden-teak-acacia-multi-use-panel_p0456516 https://www.remarkablefurniture.com.au/collections/outdoor-coffee-tables/products/clifton-outdoor-ceramic-pop-up-coffee-table-130-cm

Hi - Looking for carpenter to help cut 10x timber support beams for a low clearance balcony deck; treated h3 for outdoor. Can provide h3 treated timber, or gasket can provide for price. Boards need to be 1.3m long, and taper cut lengthwise. eg; 70mm tall on high on high side, 20mm tall on low side. Can be anywhere from 40-80mm wide. Cutting offsite preferred, hopefully fairly simple for someone with a band saw and taper cut jig.

Purchase timber, cut and install edges to kids swing set on three sides

Old shed rusted nails. Needs an angle grinder to tack this baby down. She is empty and should be a quick and easy enough job.

The top plank of this cabinet unit is glued down. I want to unglue it and add hinges so it becomes a lid that you can also open from the top to access the cupboards more easily when the bed is out.

Pick up the floor decking from IKEA and lay them on my balcony. Will pay for supplies and install. Need today if possible. Happy for decking to come from Bunnings or IKEA.

Assemble legs to existing wooden table Jigsaw a round hole in wooden table to fit Korean bbq Ensure table is stable after the hole and potentially add a fire protection layer https://m.youtube.com/watch?v=cxVvbi-AAiA

I have an existing built in cupboard with shelving. I need the old shelving pulled out and new shelving installed, to accommodate a dyson stick Vac .. [ there is a power point with in the cupboard] - I need to - remove old shelving - install new shelves - white melamine ok have specified 25mm thick as they could sot in with the old lining [ see images ] happy to look at ripping out the whole thing but price dependant looking forward to hearing from you Cheers Jane

I need the shelf that my oven sits on to be modified / trimmed according to the oven manual dimensions.

Gurney outdoor areas - pool, patio, balcony. Gurney provided. 3 hrs

I have an existing built in wardrobe that only has hanging rails in place. Need someone to supply the melamine shelving and drill the holes to install the little bracket inserts

Hey guys I needed a 20mm thick mdf panels cut to size Total of 2 pieces to fit into a custom chair You will need an electric saw so it’s fast and efficient You will just measure out the size and cut Can setup in the back yard I have the timber :)

I need someone to help remove my freestanding dishwasher and connect my new one. The issue is that the kitchen laminate flooring, which may have been installed after the dishwasher, is jamming it and preventing it from being pulled out easily. You may need to cut a small piece of the laminate or find another solution. Since I'll be replacing the flooring soon, it's fine if the laminate is slightly damaged or doesn't look perfect. Once the old dishwasher is out, you'll need to slide the new one in and connect it. Location: Edgecliff Time: Flexible, ideally asap Please bring your own tools

When the door of the dishwasher opens it catches on the metal kickboard - it needs to be trimmed by about 1-2cms just in depth. Width is fine.