A white van parked on a street, with a person standing next to it, ready to load or unload items.
A white van parked on a street, with a person standing next to it, ready to load or unload items.

Find a local console repairer in Ringwood North

Fill in a short form and get free quotes for professional console repair services in Ringwood North

4.3

Excellent rating - 4.3/5 (10900+ reviews)

Need console repair services?

  • Troubleshooting the problem
  • Checking connections
  • Cleaning the internal parts
  • Rewiring the console and controllers
  • Replacing the non-working components
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated console repair experts near me

Recent Console Repair reviews in Ringwood North

Very pleased with the work done by Vinny. Thank you.

Fix 2 water taps (leak and loose)in a commerical kitchen

$200

Wonderful! Perfect job

My toilet water level keeps dropping- could someone come fix it

$110

Daniel is a very pleasant and courteous young man. He worked patiently to get the good result. Would recommend him anytime.

Remove & replace 3 outdoor wall-mount lamps

$120

Gavin is a fine craftsman. We were so impressed with this work. He was so tidy and professional. We highly recommend him

Remove and replace concrete front steps in North Ringwood

$1,450

I can’t wait to recommend Tristen to other friends and colleagues. Super friendly and efficient. Nothing was a problem or too much effort. I wouldn’t hesitate to call on Tristen again.

Garden waste stumps removed

$100

Top job. Thanks.

GPS/Reverse camera installation on dual cab ute

$200

What's the average cost of a console repair expert in Ringwood North

$165 - $255

low

$165

median

$200

high

$255

Low, median and high bar chart distribuiton

Average reviews for Console Repair Services in Ringwood North

based on 6 reviews

5

6
0
0
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

7+

Tasks successfully completed

2

Average amount of offers per task

27

 mins

Average time to receive offers

Statistics from the most recent tasks on Airtasker since 15th Feb 2021.

Airtasker has over 7 console repair experts in Ringwood North, with an average rating of 5.0 stars from 6 reviews. Get in touch with console repair experts such as Richard V, Vinod T, and Gavin P today to get a wide variety of Console Repair jobs done.
Don't live in Ringwood North? We also have console repair experts available in Vermont and Ballarat available today.

Recent Console Repair tasks in Ringwood North

Remove and replace concrete front steps in North Ringwood

$1,450

Ringwood North VIC, Australia

27th Aug 2024

Remove cracked concrete steps. Replace with new concrete steps (provided). The house was built in 1981. The concrete steps have started to crack. We have purchased new steps from Anston. The old steps need to be cut out. The new steps need to be concreted in on the bricks.

Gavin is a fine craftsman. We were so impressed with this work. He was so tidy and professional. We highly recommend him

Need MDF boards cut down into 3.4cm strips

$50

Ringwood North VIC, Australia

14th Nov 2023

I need 3 total MDF boards cut down One is currently 1200x900x3mm each (1 total) And the other has been cut down in half (2 total) at 600x900x3mm I need them each cut down long ways vertically to make 26 strips for each of the 3 boards 1200mm/600mm tall respectively but 3.4cm across each (so one of these unaltered boards would make 26 strips) - Due date: Flexible

Need my MDF boards cut down into 3.4cm strips

$50

Ringwood North VIC, Australia

6th Nov 2023

I need 3 total MDF boards cut down One is currently 1200x900x3mm each (1 total) And the other has been cut down in half (2 total) at 600x900x3mm I need them each cut down long ways vertically to make 26 strips for each of the 3 boards 1200mm/600mm tall respectively but 3.4cm across each (so one of these unaltered boards would make 26 strips) - Due date: Flexible

Fix 2 water taps (leak and loose)in a commerical kitchen

$200

Ringwood North VIC, Australia

25th Sep 2023

Tap 1: Leaking water tap, resulting in dripping water on the ground Tap 2: Loose water tap popped out - Due date: Flexible

Very pleased with the work done by Vinny. Thank you.

Garden waste stumps removed

$100

Ringwood North VIC, Australia

19th Sep 2023

Approximately 20 segmented palm tree trunks to be removed from the property. - Due date: Needs to be done on Tuesday, 19 September 2023

I can’t wait to recommend Tristen to other friends and colleagues. Super friendly and efficient. Nothing was a problem or too much effort. I wouldn’t hesitate to call on Tristen again.

My toilet water level keeps dropping- could someone come fix it

$110

Ringwood North VIC, Australia

11th Aug 2023

Since Thursday my toilet water level keeps dropping. It fills up properly when I flush it then a few min later the water level drops down - Due date: Needs to be done on Saturday, 12 August 2023

Wonderful! Perfect job

Removal of old deck and new steps and patio built

$2,000

Warranwood VIC 3134, Australia

12th Jan 2023

An old timber deck in the back yard need removing and a simple patio with a few steps needs to be built in its place please. - Due date: Flexible

Maax spa keeps tripping the circuit breaker

$50

Warranwood VIC 3134, Australia

21st Dec 2022

Maax spa has recently been filled and turned on after 2 years and is tripping the circuit breaker. I need a quote to see if it is worth fixing as the spa is 20 years old - Due date: Flexible

Set up new Xbox with split screen and show me how to use it.

$50

Ringwood North VIC, Australia

29th Nov 2022

The Xbox is connected to the tv and it all works. Set up split screen play and show me how to use it. - Due date: Before Friday, 9 December 2022

Help repair a few paint chips and dents in plaster

$200

Warranwood VIC 3134, Australia

13th Oct 2022

scuffs and scratches on interior walls require repainting about 3 different locations - Due date: Needs to be done on Saturday, 15 October 2022

GPS/Reverse camera installation on dual cab ute

$200

Warranwood VIC 3134, Australia

9th Mar 2022

I have a gps/reverse camera which I need someone to install in my dualcab ute. power to the GPS is direct to the fusebox, the rest is plug and play. Will be a permanent installation so wires need to be tucked away or hidden etc. - Due date: Flexible

Top job. Thanks.

Supply and install new side gate, repair outdoor steps

$500

Ringwood North VIC, Australia

3rd Mar 2022

Looking for someone to supply and install a pet proof side gate (due to looking after a dog from next Friday). Second part is not so urgent to repair or replace 3-6 steps down the other side of the house (wooden/earth and gravel) - Due date: Before Thursday, 10th Mar 2022

Remove & replace 3 outdoor wall-mount lamps

$120

Ringwood North VIC, Australia

5th Jan 2022

Looking for qualified electrician to remove and replace 3 outdoor wall mount luminaries. The new ones are to be connected to the existing sensor.

Daniel is a very pleasant and courteous young man. He worked patiently to get the good result. Would recommend him anytime.

Partial assembly of a Thumpstar TSX125.

$200

Heathwood VIC 3134, Australia

5th Sep 2021

Hi. My son just purchased a Thumpstar motor bike. It needs partial assembly which we need assistance with. Needs to be by a qualified motorbike mechanic for warranty purposes. Thx, Dave.

Fabricate wood display pedestals and acrylic tops

$400

Ringwood North VIC, Australia

17th Feb 2021

Hi there all, Just looking to get a quote for 7 black plinth pedestals to be made up for some high end Star Wars busts (dependent on quote to make them) The weight of which are roughly 15-25kg each. So the fabricated plinths will need to support that weight I need them to look exactly like the photo for quality. Happy for a matte black finish or glossy. The black pedestal plinths will need to be 90 cm in height 75cm in length across 55cm in depth And I’d love to have a plastic acrylic topper made to go over each please To these dimensions 75cm height 75cm length 55cm depth/width