Find experienced deck builders near you

Need to recoat the deck. 25-28 mt2 max.

Deck areas that require cleaning and oiling: - Clean and polish front door small deck (2x3) and back area deck (8x3)

Cleaning, light sanding and stain of the deck. We have a pressure washer and will supply the stain. Cleaning materials, sanding materials and stain materials will need to be provided. Deck is roughly 3m by 6m

Assistance requested to bring our timber decking back to life. It looks like it needs a sand / prep and oil. The deck covers approx 34 square metres. Area details and images are below - Pool area deck - Entry deck - Side deck - Pool pump housing, and - 2 pergolas Images are attached for reference

Outdoor deck needs cleaning and staining. 6m x 6m. Needs cleaning and then stain applied Material provided - cleaning fluid, stain and brush - Due date: Flexible

Hi guys, I'm looking for someone to set-up a bunch of low voltage property lighting. Keen to find someone who is flexible, fast working and has an eye for what will look good. A lot of the lights I already have, others I will work with you on to select and source. Not looking for a fixed price quote, just want to find someone who can work on a day rate. As we're out at Glenorie I will always make sure you have a full day of work so it's worth the travel to get here. We are near Glenorie village and having your own car/transport is essential. It is not easy to describe the work, it's much easier to walk you around and explain what I'd like to do. It's likely to be multiple full days, possibly a week. We can break it down into discrete/separate projects. The projects are as follows: - Install deck lighting - Install tree uplighting - Install roadside lighting - Install a wide range of solar lights - Install some rock uplighting - Install some tree wrapping lights - Install entrance lights - Install garden bed lights - Install lights in/around some sheds It's all low voltage work so electrician not required. There are also other projects for the right kind of person, including set-up of sprinkler systems, some animal automation/tech products, general water system etc. Multiple weeks of work available for the right skill and attitude. Hard worker who can focus and move fast is essential. Rate proposed is for a day rate, in chunks of no less than one full day so it's worth the travel. Multiple days very likely.

Need nails from deck removed and replaced with decking screws. Don’t have time free to complete myself. Would like you to supply decking screws as well. Any colour is fine. Most of the nails have already lifted so should be easier to remove There is a total of 27 rows of screws and 42 screws per row

We need a deck extended by 1.4 m x 2.5m and a small wooden ramp repaired or replaced.

Clean medium size wooden deck and small, tiled patio with water and scrub down with bristle brush. Water available on site. Bring your own bristle brush. Windows to be cleaned with water and squeegeed dry. Metal fence to be washed with water and soft brush - bring your own brush. Eaves to be cleaned by hand using a soft brush and cobwebs cleared. Measurements: Width: 306 cms. Length 1,177 mtrs. Fence height: approx 1.8288 mtrs.

Offer includes labour and cost of decking oil - View all the details of this offer: https://www.airtasker.com/offers/01JJ0GNRM5GSJZJR36183R78MS

Cleanup uneven deck edging and install two panels. Panels are already supplied.

An area of 4 sqm of decking needs to be repaired. Some under structure joists have failed over time. These need to be replaced and decking re-set.

Need merbau deck, stairs and wall sanded , cleaned and stained

Timber deck maintenance. Sand, oil and stain depending on what you believe is required

I need to restore my cubby house inside deck. Due to rain and water deck inside the cubby house was rotten, I need to restore base of the cubby house.

Need someone who can get joists nailed level and ready for decking boards to be laid. Tomorrow or Saturday. All material will be on-site tomorrow.

Need someone to lightly sand a deck which is 5.5m x 5 metres so it’s prepared for a new stain

Merbu Decking and merbu retaining wall in front yard needs to be painted/ oiled. Decking oil will be supplied. Bring other items for painting. Decking area 5.6m x 5.8m. Retaining wall area 12-15 sqm.

Hi, we’re looking for someone to help us finish the flooring on our small apartment balcony in Roseville. The balcony is 3m x 1.5m, and we’ve already laid most of the Decko composite tiles. There are a few gaps around the edges that need to be filled with tiles cut to fit, following the existing alternating pattern. What’s Involved: 1. Measure the gaps around the edges of the balcony. 2. Cut the Decko composite tiles (we’ll provide the tiles). 3. Fit and install the cut tiles neatly for a polished finish. Additional Info: • It’s a small job for an apartment balcony. • We have a garage with a PowerPoint you can use for cutting the tiles. • You’ll need to bring your own tools (e.g., a jigsaw or similar cutting tools suitable for composite material). If you’ve done similar work with decking or flooring and are happy to help, get in touch! Looking forward to hearing from you.

Our deck, which sits on a lake, has sustained some damage to the corner. Two of the fascia panels need replacing. To access the panels, you will need to go in the water. It isn't very deep, just below chest height at the deepest point of the deck. The planks are made of composite, hardened plastic (wood effect). I believe the brand is called NewTec (from the USA). The deck dimensions are 6x8 metres. Your price will need to include the cost of labour materials.