Find a reliable local draftsman in WA

I have a second hand patio purchased and disassembled from another property and required council approval to reconstruct it next to my current patio. A new wall will also need to be built.

We are adapting a 4 bed, 2 bath plus study house into a “dual key” residence of 2 smaller “apartments”, each with 1 bed, 1 bath and study. (One of the larger bedrooms becomes a kitchen/living space) We need a draftsman to draw up the details of this small plan for a builder to follow. 1. Break through brick wall to install a new “front” door for the rear apartment. Adjust roofline to enable this to work and create a small verandah. 2. Remove an existing window and replace with a double door opening to the outside by removing brickwork below window. 3. Install a (soundproof) door in the hallway to create the internal separation of the apartments. 4. Build a wall on the shared verandah to seperate this shared space. This wall to include sliding pocket doors and to be insulated for sound proofing. It would be great if you could visit site and provide advice and guidance. We have the original drawings of the building. Please advise on your rates for this type of work.

My air con is not getting a daft therefore makes a noise i think its just as simple as unblocking the duct but need someone to look at it please

Autocad 2D draftsman who has experience working with kitchen cabinets and electrical drawings Quick job, budget is $120 all up i have the original DWG file , AutoCad

I'm looking to build a 90sqm house on stumps with exposed timber. I want to cut down on size to add more money for better quality.

I want to add a room and bathroom to my house in Cannington

I have an old and small 97 sqm home building and now I’m trying to extend to 250 sqm and renovate it. I made the design and drawings I want but need your help with drafting and council approval.

We are a small cabinetmaking and signage workshop requiring help with drafting of various products. Cyrrently running Mozaik for the cabinets and Fusion 360 for most other things to keep our CNC router programmed.

We are putting an ensuite into our house. It's taking a bit of the loungeroom so it is all under the existing roofline. Will have an external window. Need to put through council.

Looking to have drafting and design done for our Laundry and WC. Requirements are bench spaces along the 190cm wall with overheads. Must have washing machine and dryer underneath bench plus a sink near the window. Doesn't need to be a trough prefer a sink with cupboard space underneath. Back to wall toilet in the toilet area to the right. Then custom cabinetry within the 161x109x60 space that will also streamline into the benchtop and overheads. Would love the option of an ironing board pull out cupboard. Floor to ceiling cupboards are ok if it means i can store larger items like vacuum cleaner and linen etc.

Building a steel frame house in Myalup. Will have steel frames manufactured according to: Compliance to NCC, NATSPEC and Australian Standards as per following: • National Construction Code (NCC) • AS/NZ 1170.1 2002 • NASH 2014 • AS/NZ 1170.2 2021 • NATSPEC STRUCTURE 0342 Light • AS 4100 Steel Structure Code • Steel Framing Clauses 3.1 to 3.7 • AS 4600 2018 Cold Formed Steel Structures • AS/NZ 1170.0 2002 • AS1397 • AS 4055-2012 INCLUSIONS to our quote as follows: • Supply of Engineer designed prefabricated steel Roof Frames - 75/250mm stud G500 AM150 • Supply of Engineer designed prefabricated steel Wall Frames - 89mm stud G500 AM150 • Supply of Roof and Ceiling Battens • Supply of Fixings and Hardware • Supply of Structural Steel • Supply of Engineer certified shop drawings and installation detail drawings for Roof and Wall Frames Need houseplans drawn up so I can apply for council approval and also mark up for plumbing for concrete slab including slab.

Need a qualified drafter to draw elevation of enclosed balcony with all the dimensions of windows and stud walls to meet local council's requirements.

Timber patio 5x5m - need plans drawn. Must include site visit and measurement

Brick, single skin. Small deck. Minimal internal walls.

A Granny Flat Floor Plan need to be drafted. A previous drawing is also available where it is shown as a shed.

Need someone to do drafting of extension to the existing house to satisfy council

Looking for a draftsperson to draw up plans for a proposed new deck and pergola at our home in Bicton. The work needs to begin in July so looking to have the drawings completed asap so we can submit to council for approval. See images of existing structure.

Just need a draftsman to do up a quick drawing following the guidelines around firebreaks, setbacks and height restrictions that we received from the council re shed building (large dwelling) that will be sent in to the council for building approval.

Gap sealing / draft proof caulking of skirting boards. Drafts / gaps between the tile floor & skirting boards * 1 living room > skirting boards caulking * 1 small hallway & small areas in kitchen > skirting board caulking I will buy the silicone gap sealer I'm looking for someone who is experienced & proficient at caulking & who understands draft sealing I don't know area sizes in square meters, It's a small 1 bedroom unit with only 2 rooms / areas needing caulking I look forward hearing from you & getting this gap sealing / draft proofing task completed.

I purchased a house recently. The shire of Kalamunda reached out to me saying the shed out the back was put up without approval and to submit retrospective documentation. The shed is roughly 5 x 10m. Photo in the questions section