Find trusted local electricians in Bondi Beach

Main Job is:. 1. Close off wiring for previous electric blinds - 4 wires/plugs Separately 2. Replace exiting white LED strip lighting with warm white We have 1 set which I would like to confiorm if it works.

I need a pendant light changed over. Realestate agent won’t release my bond until it’s done. Today please.

I have a 9kg Fisher Paykel Heat Pump Dryer - DH9060P1 The dryer is 3 years old so still quite new. Over the past 12-18 months the performance of the dryer has been deteriorating. It is taking longer and longer to dry clothes. It has now stopped drying clothes entirely.

A qualified electrician to install and replace existing lights with 3 x pendant lights (hallway & living area) 2 x ceiling lights (Bedrooms) 2 x Spot light (bathroom, kitchen) 1 x Veranda light Could be done either Monday 16 or 23 Dec.

Lighting module for apartment seems to have failed. Woke up 1 morning and none of the apartment lights worked - room switch push buttons do nothing and small lights indicated status on buttons all off. After playing with switch box - the lights did turn on when lighting switch was toggled off (was originally still on when first occured) and then back on. So lighting now now works, but can only be turned off an on from main switchboard, and can only turn all lights for entire apartment one/off together. The is a single light for balcony which seems to work fine and is unaffected. All other power in the apartment is fine. There is also light in 1 room which now doesnt turn on at all, even when all lights are on when switchboard activited, and which seems to have died during this period (am assuming the bulb is fine and this is related) The building manager has advised this is a known building issue and usually cause by a problem with the ABB branded KNX Dali lighting control system. See photo as reference. The system appears to cnosist of an actuator (SA/S 8.16.5.1), power supply unit (SV/S 30.320.1.1) and emergency lighting module (DG/S 1.16.1) Need an electrician to diagose and fix the module. Hopefully it is still functional but needs re-programming. The building manager has provided me a 'programming' file which apparently provided the setting/program to imjplement if required. The file type is a ".knxproj" and i cant open it - am assuming you might have an idea on how to open or upload this to the system if/as needed. Seperate to this there are 2 down-lights in hallway which were not working prior to this issue occurring, and would hope to get this fixed at same time (but this is secondary priority) . I think these are probably cause by a failed transformer, but happy to discuss this seperately.

Hi we need an electrician today to: - install 1 led mirror 1200x800 power is already there but need a small conduit as mirror is too low - 1 small pebble mirror no power required - need 1 powerpoint for a gas cooktop

16mm SDI between meter and new main switch Double check where the consumer neutral is

would need a new main switch and a rcds to make room for the new main switch

I need a new electric stove connected

Need to install PowerPoint in our office. We are Mint Plumbing&relining

We have one mains power and one battery powered smoke alarm that need replacing with standard battery powered.

Car is bmw series 1 2007 2.0 L diesel . It had compression issues before , it’s not starting now no electrical issues cause stereo and lights are on and ignition firing . I understand it could be a bigger problem but I just need someone who can help starting it to avoid towing it to my mechanic far away . Thanks

Electrolux washer / dryer combo Washer works ok Dryer doesn’t dry (clothes still very damp at end of cycle) Suspect it’s a fault something like this https://youtu.be/rBnky1bC67E?si=FYZkMZKP-Ra5XRDY

Our gas has been turned off and turned back on again, but hot water has not returned. I am assuming the water has tank needs to be re lit, but it is behind the kitchen cabinet.

I have a computer which needs a 15A rather than regular power supply and need this switched. You must be a qualified electrician to apply. Thanks

I only have one electeric plug in my laundry for washing machine and dryer. I need another

Need licensed electrician with insurance to install a Tesla Charger to the front of my house at Bondi

I need someone to hang a very delicate pendant (must bring wiring, chord and bulb etc to hang it). Also need to add a switch to a fuse box.

Pick up TV and Dryer from Bellevue Hill drop off to Bondi Beach to mount on wall (cords hidden etc) clean and pro job along with the dryer mounted.. Please see photos for reference Need to do tomorrow 16th September after 11am.

Need to fix some LED lights that are either dead. All other LED lights are blinking.

Hey guys I Need a sparky that can install a ceiling fan in my room ?